Best SCULPFUN Laser Engravers for Wood in 2026: 12 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You need the best SCULPFUN laser engravers for wood to match your project scale. Our 12 picks rely on published specifications from the listings, not personal testing. The SCULPFUN S9 5.5W Diode Laser Engraver leads because its 0.06mm focus spot ensures precise detail on general DIY wood projects. We compare attributes like laser power, work area size, and form factor to show you what each spec means in practice. This guide helps you decide which machine fits your workspace and material needs.
Quick picks
The best fit for you
- You need the best all-rounder for wood projects SCULPFUN S9 5.5W Diode Laser Engraver The 5W power and 16.14 x 16.34-inch area handle general DIY wood tasks.
- You want to cut thick wood boards quickly SCULPFUN S9 Pro 10W Laser Engraver The 10W laser power provides the penetration needed for solid wood cutting.
- You prioritize safety with enclosed indoor engraving SCULPFUN iCube Ultra 12W Enclosed Laser Engraver The 12W output is contained within a filtered enclosure for safe indoor use.
- You need a portable unit for small crafts SCULPFUN iCube Pro 5W Laser Engraver Its compact dimensions and built-in filtration make it ideal for small woodcrafts.
- You want the best budget option for details SCULPFUN C1 3W Portable Mini Laser Engraver This lightweight model excels at fine detail work on small wood pieces.
Our 12 picks
SCULPFUN S9 5.5W Diode Laser Engraver
Best for: general DIY wood engraving and cutting
- Compatible Material
- Wood, Jewelry (what this guide is about)
- Laser Type
- Diode
- Laser Power
- 5.5W
- Working Area
- 16.14 x 16.34 in
- Software Compatibility
- LaserGRBL, LightBurn, Benbox, LiteFire
- Cutting Capacity
- Up to 15 mm wood, 10 mm acrylic
View on Amazon: SCULPFUN S9 5.5W Diode Laser Engraver Affiliate link
The SCULPFUN S9 is an open-frame diode laser cutter and engraver built for DIY projects. It provides a 5.5W optical laser output and a fine 0.06mm laser spot over a 16.14 by 16.34-inch working area. With the ability to cut wood up to 15 mm thick, this machine suits you if you need a dependable, mid-sized desktop tool for engraving detailed patterns and cutting flat timber crafts.
Pros
- Cuts wood up to 15 mm thick using a 0.06mm focus spot
- Generous 16.14 x 16.34 in open working area
- Laser filter cover blocks up to 98% of ultraviolet light
- Expandable and upgradable full-metal frame structure
Cons
- 5.5W power level requires slower feed rates for deep cuts
- Requires manual screw adjustments for beam focusing
- Open-frame build lacks an enclosed protective cabinet
Good fit if
- You need to cut wood crafts up to 15 mm thick.
- You want a sizable 16.14 x 16.34 in bed for wooden signs and panels.
- You use standard laser software like LaserGRBL or LightBurn.
Skip if
- You want a pre-assembled machine that requires no mechanical setup.
- You need automated autofocus rather than manual sliding focus.
- You prefer an integrated enclosure to manage fumes and safety.
Verdict: SCULPFUN S9 5.5W Diode Laser Engraver balances a precise 0.06mm focus spot with a generous 16.14 x 16.34-inch work area. It gives you dependable cutting penetration and broad software compatibility for everyday woodworking projects.
SCULPFUN iCube Pro 5W Laser Engraver
Best for: compact desktop wood engraving and small crafts
- Compatible Material
- Wood, Acrylic (what this guide is about)
- Laser Type
- Diode
- Laser Power
- 5W (5000mW)
- Working Area
- 130*130mm
- Engraving Speed
- 10,000mm/min
- Software Compatibility
- Sculpfun app
View on Amazon: SCULPFUN iCube Pro 5W Laser Engraver Affiliate link
The SCULPFUN iCube Pro 5W is a compact diode laser engraver designed for desktop use on wood and acrylic. It features a 5W output, a 0.06 mm laser spot, and a working area of 130 by 130 mm. Its semi-open base lets you place the unit directly onto larger wooden surfaces. Equipped with a built-in smoke filter and Bluetooth connectivity, it suits hobbyists needing a contained, portable setup for detailed small-scale projects.
Pros
- Built-in smoke filtration system and 45°C temperature safety alarm
- Semi-open base allows direct placement onto large wooden objects
- Fine 0.06 mm laser focus spot for high-detail engraving
- Supports wireless operation via Bluetooth and the Sculpfun mobile app
Cons
- Working area is limited to 130 x 130 mm for internal jobs
- 5W output offers less cutting power than 10W or 12W models
Good fit if
- You work in compact spaces and need integrated smoke filtration.
- You want to engrave small wood items or position the machine onto larger surfaces.
- You prefer controlling jobs wirelessly via a smartphone app.
Skip if
- You require an enclosed or open bed larger than 130 x 130 mm.
- You need higher laser power to cut thicker or denser hardwoods quickly.
Verdict: SCULPFUN iCube Pro 5W Laser Engraver delivers portable, detailed engraving with built-in filtration and flexible placement options. It is a practical desktop choice for small woodcrafts despite its modest standard bed size.
SCULPFUN S9 Pro 10W Laser Engraver
Best for: Cutting thick wood boards and detailed engraving
- Compatible Material
- Wood, Metal, Acrylic, Leather (what this guide is about)
- Laser Power
- 10W
- Working Area
- 400 x 410 mm (15.75 x 16.14 in)
- Software Compatibility
- LaserGRBL, LightBurn
- Form Factor
- Open modular structure
- Cutting Capacity
- Up to 15 mm wood, 10 mm acrylic
View on Amazon: SCULPFUN S9 Pro 10W Laser Engraver Affiliate link
The SCULPFUN S9 Pro delivers a 10W laser output with an ultra-fine 0.06mm spot size for detailed wood processing. It provides a standard 400 x 410 mm working area and can cut wood up to 15mm thick. If you need a reliable open-frame machine that handles both fine surface markings and deeper timber cuts using standard software like LightBurn or LaserGRBL, this unit fits your workshop needs.
Pros
- 10W output cuts wood up to 15mm thick
- Fine 0.06mm laser spot for precise wood detailing
- Generous 400 x 410 mm working area with axis scale lines
- Sliding fixed-focus mechanism sets up in seconds
- Includes steel A4 desktop protection pad
Cons
- Open modular frame lacks a built-in enclosure
- Requires 10 to 20 minutes of initial mechanical assembly
Good fit if
- You need to cut wood planks up to 15mm thick
- You want a large 400 x 410 mm workspace for medium-sized wood projects
- You run your laser using LightBurn or LaserGRBL on Windows or Mac
Skip if
- You need a fully enclosed desktop machine out of the box
- You require an assembled machine ready to engrave with zero setup time
Verdict: SCULPFUN S9 Pro 10W Laser Engraver provides balanced 10W cutting capability and an expansive work area for serious wood craft projects. It is an adaptable open-frame tool suited for detailed etching and solid wood cutting.
SCULPFUN C1 3W Portable Mini Laser Engraver
Best for: detailed photo engraving on small wood crafts
- Compatible Material
- Wood, Acrylic, Leather (what this guide is about)
- Laser Power
- 3W
- Working Area
- 150 x 130 mm
- Software Compatibility
- LightBurn, LaserGRBL
- Target Audience
- DIY, Beginners
- Form Factor
- Portable
View on Amazon: SCULPFUN C1 3W Portable Mini Laser Engraver Affiliate link
If you need a lightweight tool for small wood projects, this compact 3W unit delivers detailed results. It features an ultra-fine 0.04mm laser spot and a 150 x 130 mm working area, making it suitable for delicate photo engraving on wood, leather, and acrylic. Weighing just 1.05 kg and arriving fully assembled, it connects to LightBurn and LaserGRBL on Windows or macOS for straightforward desktop crafting.
Pros
- Ultra-fine 0.04mm laser spot for precise photo engraving
- Lightweight 1.05 kg portable frame comes fully pre-assembled
- Works with both LightBurn and LaserGRBL on Windows and macOS
- Includes X and Y axis limit switches and a magnetic protective cover
Cons
- 3W power output is not recommended for laser cutting
- Compact 150 x 130 mm working area limits project size
- Cannot engrave directly onto bare metals
Good fit if
- You want a fully assembled, portable engraver that weighs only 1.05 kg
- You focus strictly on surface engraving small wood items rather than cutting
- You need ultra-fine 0.04mm precision for detailed graphics and text
Skip if
- You plan to cut through wood stock instead of only engraving it
- You need to engrave workpieces larger than 150 x 130 mm
- You require a laser capable of marking bare metal surfaces
Verdict: SCULPFUN C1 Portable Mini Laser Engraver is a lightweight, out-of-the-box option that excels at fine detail work on small wood pieces. It offers precise photo engraving without requiring complex setup, provided you do not need cutting capabilities.
SCULPFUN iCube Ultra 12W Enclosed Laser Engraver
Best for: enclosed indoor wood engraving on smaller items
- Compatible Material
- Wood (what this guide is about)
- Laser Type
- diode laser
- Laser Power
- 12000mW (12 W)
- Working Area
- 5.9x5.9" (150 x 150 mm)
- Engraving Speed
- up to 10000 mm/min
- Form Factor
- Fully enclosed
View on Amazon: SCULPFUN iCube Ultra 12W Enclosed Laser Engraver Affiliate link
This fully enclosed desktop engraver features a 12 W diode laser with a fine 0.06 mm spot. It delivers speeds up to 10,000 mm/min across a 150 x 150 mm working area with up to 80 mm of vertical clearance. An integrated smoke filter and auto-stop enclosure make it suitable for indoor wood engraving on smaller workpieces.
Pros
- 12 W diode laser with a 0.06 mm fine laser spot
- Fully enclosed design with built-in smoke filter and door-open auto-stop
- Engraving speeds reaching up to 10,000 mm/min
- Status indicator light and emergency stop switch
Cons
- Working area is limited to 150 x 150 mm
- Maximum processing height capped at 80 mm
Good fit if
- You want an enclosed, fume-managed workspace for small wooden projects
- You need 12 W of optical power combined with a fine 0.06 mm laser spot
- You prefer an engraver that does not require complex assembly
Skip if
- You need to cut or engrave wood panels larger than 150 x 150 mm
- You work with tall objects exceeding 80 mm in height
Verdict: SCULPFUN iCube Ultra 12W Laser Engraver delivers strong 12 W optical output within a self-contained, filtered desktop enclosure. It is a solid match if you prioritize indoor safety and detailed engraving on smaller wood items.
SCULPFUN C1 3W Mini Laser Engraver
Best for: detailed small-scale wood engraving and portable crafting
- Compatible Material
- Wood, Acrylic, Leather (what this guide is about)
- Laser Power
- 3W
- Working Area
- 5.9 * 5.12" (150×130mm)
- Software Compatibility
- LightBurn, LaserGRBL
- Target Audience
- DIY, Beginners
- Form Factor
- Portable
View on Amazon: SCULPFUN C1 3W Mini Laser Engraver Affiliate link
The SCULPFUN C1 is a compact, pre-assembled laser engraver built for smaller desktop projects. It features a 3W laser diode with an ultra-fine 0.04mm spot size and a 150×130mm working area. Weighing 1.05kg, it is easy to carry and operates with LightBurn and LaserGRBL on Windows and macOS. This machine suits you if you want a ready-to-use tool for intricate photo engraving on wood without assembling frame rails.
Pros
- 0.04mm ultra-fine laser spot for high-detail wood engraving
- Comes fully pre-assembled for out-of-the-box operation
- Lightweight 1.05kg portable frame
- Equipped with X and Y limit switches and a magnetic protective cover
- Compatible with LightBurn and LaserGRBL across macOS and Windows
Cons
- 3W laser output is primarily suited for engraving rather than thick cutting
- Working area is limited to 150×130mm
Good fit if
- You need a pre-assembled, portable engraver that fits on small desks.
- You prioritize fine detail and photo engraving on small wood pieces.
- You want standard software support for LightBurn or LaserGRBL.
Skip if
- You need to engrave large wood panels exceeding 150×130mm.
- You require high optical wattage for cutting thick wood slabs.
Verdict: SCULPFUN C1 Mini 3W Portable Laser Engraver provides high-resolution 0.04mm engraving in a portable, pre-assembled package. It is an ideal pick for small-scale wood markings where workspace and mobility matter.
SCULPFUN S9 5.5W Laser Engraver
Best for: detailed wood engraving and DIY gift tags
- Compatible Material
- Wood (what this guide is about)
- Laser Power
- 5.5W (5500mW)
- Software Compatibility
- SCULPFUN Space
- Target Audience
- DIY
- Dimensions
- 19.7 × 11.8 × 3.94 inches
- Weight
- 6.61 pounds
View on Amazon: SCULPFUN S9 5.5W Laser Engraver Affiliate link
The SCULPFUN S9 is a 5.5W diode laser engraver built with a metal frame for DIY woodworking and small craft projects. Its 0.06 mm laser spot provides fine detail when engraving names, logos, or patterns onto wooden blanks and tags. Controlled via the SCULPFUN Space app on Windows or macOS, you can import vector and raster files to arrange repeat layouts, making it practical for home hobbyists making personalized wooden gifts.
Pros
- Fine 0.06 mm laser spot for detailed wood engraving
- 5.5W (5500mW) laser output suitable for wood craft projects
- Supports SCULPFUN Space on Windows 10+ and macOS 13+
- Accepts common design file formats including SVG, DXF, JPG, and PNG
Cons
- Requires manual frame assembly and fastener checks before use
- Uses a manual sliding mechanism to set focal height
- Cannot cut clear acrylic directly
Good fit if
- You want a fine 0.06 mm spot size for detailed engraving on wood tags and signs.
- You use Windows 10+ or macOS 13+ and want dedicated SCULPFUN Space control.
- You need a lightweight 6.61-pound machine that handles small craft batches.
Skip if
- You need a fully enclosed machine that requires no frame assembly.
- You plan to cut clear acrylic sheets directly.
Verdict: SCULPFUN S9 5.5W Diode Laser Engraver delivers precise 0.06 mm spot engraving and steady 5.5W output for personalized wood blanks. It serves DIY crafters well as long as you are comfortable assembling the frame yourself.
SCULPFUN S9 90W Effect Laser Engraver
Best for: detailed DIY wood engraving and cutting
- Compatible Material
- Wood, Metal, Jewelry (what this guide is about)
- Laser Power
- 5.5W (5000mW)
- Software Compatibility
- LaserGRBL, LightBurn, Benbox
- Cutting Capacity
- 15mm wood, 10mm acrylic
- Target Audience
- DIY
- Dimensions
- 24 × 14 × 5 inches
View on Amazon: SCULPFUN S9 90W Effect Laser Engraver Affiliate link
The SCULPFUN S9 90W Effect Laser Engraver pairs a 5.5W diode laser with a fine 0.06mm compressed focus spot. Built with an all-metal frame, it offers a 410 x 420 mm working area and can cut wood up to 15mm thick. If you need a benchtop machine for DIY woodwork that supports both LaserGRBL and LightBurn, this model provides precise beam delivery, built-in measurement scales, and an expandable frame design.
Pros
- Ultra-fine 0.06mm laser focus spot for detailed line work
- Capable of cutting up to 15mm wood and 10mm acrylic
- 410 x 420 mm work area with precision scale lines along the axes
- Laser shield filters up to 98% of ultraviolet light
Cons
- Actual optical laser output is 5.5W despite the 90W effect label
- Frame requires assembly before first use
- Included desktop protection plate is A4 size, which is smaller than the full work area
Good fit if
- You need to cut soft wood panels up to 15mm thick.
- You want a 410 x 420 mm working bed with physical measurement markings.
- You plan to control your machine using LightBurn or LaserGRBL.
Skip if
- You need true optical output higher than 5.5W for faster cut speeds.
- You prefer a fully enclosed, pre-assembled machine out of the box.
Verdict: SCULPFUN S9 90W Effect Laser Engraver combines an ultra-fine 0.06mm focus spot with an open 410 x 420 mm workspace for cutting wood up to 15mm thick. Its expandable metal frame and broad software compatibility make it a practical tool for DIY wood projects.
SCULPFUN iCube Ultra 12W Portable Engraver
Best for: safe, compact desktop wood engraving
- Compatible Material
- Wood, Leather (what this guide is about)
- Laser Type
- Diode
- Laser Power
- 12W (12000mW)
- Working Area
- 150 x 150 mm
- Engraving Speed
- 10000mm/min
- Form Factor
- Fully enclosed (Class 1), semi-open
View on Amazon: SCULPFUN iCube Ultra 12W Portable Engraver Affiliate link
The SCULPFUN iCube Ultra 12W is an enclosed desktop diode laser engraver tailored for small wood projects. It provides a 12W output with a 0.06mm laser spot and engraving speeds up to 10,000 mm/min. With a 150 x 150 mm working area, a built-in smoke filter, and Class 1 safety enclosure features, this compact machine suits you if you want plug-and-play desktop woodcrafting without open-frame safety concerns.
Pros
- 12W diode laser with a fine 0.06mm focal spot
- Class 1 enclosed design with smoke filter and door-open shutoff
- Engraving speeds reach up to 10,000 mm/min on a 32-bit motherboard
- Semi-open base allows placement directly onto larger flat surfaces
Cons
- Working area is limited to 150 x 150 mm
- Internal processing height is capped at 80 mm
Good fit if
- You want an enclosed Class 1 laser with a built-in smoke filter for indoor spaces.
- You engrave small wood items that fit within a 150 x 150 mm workspace.
- You need 12W of diode cutting power paired with fine 0.06mm detail accuracy.
Skip if
- You routinely engrave large wood panels requiring a broader work area.
- You need to engrave objects thicker than 80 mm inside the enclosed chamber.
Verdict: SCULPFUN iCube Ultra 12W Portable Engraver delivers strong 12W diode performance and fine 0.06mm detailing in an enclosed Class 1 desktop format. It is a solid choice for compact wood engraving projects in home or office environments.
SCULPFUN G9 Dual Laser Galvo Engraver
Best for: fast mixed-material engraving on wood and plastics
- Compatible Material
- Wood, Metal, Leather, Jewelry, Plastic (what this guide is about)
- Laser Type
- Infrared (1064nm) & blue diode (455nm)
- Laser Power
- 2W Infrared & 10W Diode
- Engraving Speed
- up to 5000 mm/s
- Software Compatibility
- SGD Laser, Lightburn
- Form Factor
- Enclosed Cover (Class I)
View on Amazon: SCULPFUN G9 Dual Laser Galvo Engraver Affiliate link
The SCULPFUN G9 pairs a 10W diode laser for wood cutting up to 10mm with a 2W infrared laser dedicated to plastics and all metals. Its industrial galvo drive achieves speeds up to 5000 mm/s with a fine 0.01 mm spot size. Enclosed in a Class I safety cover with an exhaust fan, it suits you if you need rapid batch engraving across mixed materials without wearing protective goggles.
Pros
- Dual 10W diode (455nm) and 2W infrared (1064nm) laser sources
- Galvo scanning system reaching engraving speeds up to 5000 mm/s
- Fully enclosed Class I design with automatic lid-open shutoff
- Cuts up to 10mm wood and 6mm acrylic
Cons
- Air purifier is an optional add-on sold separately
- Cutting capacity is limited to 10mm on wood
Good fit if
- You want to mark plastics and metals alongside standard wood projects.
- You need high-speed galvo processing up to 5000 mm/s for detailed batches.
- You prefer a fully enclosed Class I machine that contains fumes and laser exposure.
Skip if
- You need to cut wood thicker than 10mm.
- You require an integrated air filter included in the box.
Verdict: SCULPFUN G9 Dual Laser Galvo Engraver delivers exceptional versatility by combining a 10W diode for cutting wood with a 2W infrared beam for marking plastics and metals at high galvo speeds.
SCULPFUN iCube Ultra Dual Enclosed Laser Engraver
Best for: enclosed desktop wood engraving in compact spaces
- Compatible Material
- Wood, Metal, Leather (what this guide is about)
- Laser Type
- Diode (455nm) + Infrared (1064nm)
- Laser Power
- 12W diode, 1.2W infrared
- Working Area
- 150×150mm
- Engraving Speed
- 10,000 mm/min
- Software Compatibility
- Sculpfun software, LightBurn
View on Amazon: SCULPFUN iCube Ultra Dual Enclosed Laser Engraver Affiliate link
The SCULPFUN iCube Ultra Dual is a fully enclosed desktop laser engraver featuring a 12W blue diode laser and a 1.2W infrared laser. It offers a 150 by 150 mm work area with an 80 mm processing height and engraving speeds up to 10,000 mm/min. With Class 1 safety, a built-in smoke filter, and autofocus, it suits you if you need a contained desktop setup for wood engraving.
Pros
- Dual-laser configuration with 12W diode and 1.2W infrared modules
- Fully enclosed Class 1 design with integrated smoke filtration
- One-button autofocus and 0.1 mm movement precision
- Engraving speeds reaching up to 10,000 mm/min
Cons
- Work area is limited to 150 by 150 mm
- Air pump, camera, and rotary axis require separate add-ons
Good fit if
- You need an enclosed, filtered desktop setup for indoor woodworking spaces.
- You engrave smaller wooden items that fit within 150 by 150 mm.
- You want diode and infrared capabilities integrated into a single machine.
Skip if
- You need to engrave or cut large wood pieces exceeding 150 by 150 mm.
- You require more than 12W of diode laser power for deep wood cutting.
Verdict: SCULPFUN iCube Ultra Dual Enclosed Laser Engraver delivers dual-wavelength capabilities within a safe, Class 1 enclosed structure. It is a solid desktop option when you need smoke containment and precise engraving on compact wood pieces.
SCULPFUN iCube Pro Max Portable 10W Laser Engraver
Best for: compact desktop and portable wood engraving projects
- Compatible Material
- Wood, Metal, Acrylic, Leather (what this guide is about)
- Laser Type
- Diode
- Laser Power
- 10W
- Working Area
- 120 x 120 mm (4.72 x 4.72 in)
- Engraving Speed
- 10,000 mm/min
- Software Compatibility
- Sculpfun APP
View on Amazon: SCULPFUN iCube Pro Max Portable 10W Laser Engraver Affiliate link
The SCULPFUN iCube Pro Max is an enclosed, portable diode laser engraver suited for compact desktop wood projects. It delivers 10W of optical output with a 0.08 mm focus spot and operates at speeds up to 10,000 mm/min. The unit includes an integrated smoke filter and a detachable protective shield. This setup suits you if you need a compact workspace machine that can engrave small wood items or sit directly on larger panels.
Pros
- 10W diode laser with a fine 0.08 mm focal spot for detailed wood marking
- Built-in smoke filter system allows operation without a separate external enclosure
- Detachable shield enables open-bottom engraving on oversized surfaces
- Engraving speeds reaching up to 10,000 mm/min
Cons
- Standard working area is limited to 120 x 120 mm (4.72 x 4.72 inches)
- Third-party software like LightBurn is not listed in the software specifications
Good fit if
- You need a portable 10W laser for small wooden crafts and detailed items
- You work indoors and want an integrated filtration system to control smoke
- You want the option to place the machine directly on top of larger boards
Skip if
- You need a large cutting bed for oversized sheet goods without repositioning
- You plan to batch-produce large quantities requiring more than a 120 x 120 mm area
Verdict: SCULPFUN iCube Pro Max Portable 10W Laser Engraver combines a focused 10W diode with integrated smoke filtration in a space-saving footprint. It works well for small craft spaces and targeted wood-marking tasks.
Specifications side by side
| Spec | SCULPFUN S9 5.5W Diode Laser Engraver | SCULPFUN iCube Pro 5W Laser Engraver | SCULPFUN S9 Pro 10W Laser Engraver | SCULPFUN C1 3W Portable Mini Laser Engraver | SCULPFUN iCube Ultra 12W Enclosed Laser Engraver | SCULPFUN C1 3W Mini Laser Engraver | SCULPFUN S9 5.5W Laser Engraver | SCULPFUN S9 90W Effect Laser Engraver | SCULPFUN iCube Ultra 12W Portable Engraver | SCULPFUN G9 Dual Laser Galvo Engraver | SCULPFUN iCube Ultra Dual Enclosed Laser Engraver | SCULPFUN iCube Pro Max Portable 10W Laser Engraver |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Laser Type | Diode | Diode | not stated | not stated | diode laser | not stated | not stated | not stated | Diode | Infrared (1064nm) & blue diode (455nm) | Diode (455nm) + Infrared (1064nm) | Diode |
| Laser Power | 5.5W | 5W (5000mW) | 10W | 3W | 12000mW (12 W) | 3W | 5.5W (5500mW) | 5.5W (5000mW) | 12W (12000mW) | 2W Infrared & 10W Diode | 12W diode, 1.2W infrared | 10W |
| Working Area | 16.14 x 16.34 in | 130*130mm | 400 x 410 mm (15.75 x 16.14 in) | 150 x 130 mm | 5.9x5.9" (150 x 150 mm) | 5.9 * 5.12" (150×130mm) | not stated | not stated | 150 x 150 mm | not stated | 150×150mm | 120 x 120 mm (4.72 x 4.72 in) |
| Engraving Speed | not stated | 10,000mm/min | not stated | not stated | up to 10000 mm/min | not stated | not stated | not stated | 10000mm/min | up to 5000 mm/s | 10,000 mm/min | 10,000 mm/min |
| Software Compatibility | LaserGRBL, LightBurn, Benbox, LiteFire | Sculpfun app | LaserGRBL, LightBurn | LightBurn, LaserGRBL | not stated | LightBurn, LaserGRBL | SCULPFUN Space | LaserGRBL, LightBurn, Benbox | not stated | SGD Laser, Lightburn | Sculpfun software, LightBurn | Sculpfun APP |
| Form Factor | not stated | Semi-open structure | Open modular structure | not stated | Fully enclosed | not stated | not stated | not stated | Fully enclosed (Class 1), semi-open | Enclosed Cover (Class I) | Fully enclosed (Class 1) | not stated |
| Cutting Capacity | Up to 15 mm wood, 10 mm acrylic | up to 10mm soft board, 6mm acrylic | Up to 15 mm wood, 10 mm acrylic | not stated | not stated | not stated | not stated | 15mm wood, 10mm acrylic | not stated | up to 10mm wood, 6mm acrylic | not stated | not stated |
| Compatible Material | Wood, Jewelry | Wood, Acrylic | Wood, Metal, Acrylic, Leather | Wood, Acrylic, Leather | Wood | Wood, Acrylic, Leather | Wood | Wood, Metal, Jewelry | Wood, Leather | Wood, Metal, Leather, Jewelry, Plastic | Wood, Metal, Leather | Wood, Metal, Acrylic, Leather |
| Features | not stated | not stated | not stated | not stated | Auto Focus | not stated | not stated | not stated | not stated | Enclosure | Enclosure | not stated |
| Target Audience | DIY | not stated | not stated | DIY, Beginners | not stated | DIY, Beginners | DIY | DIY | Beginners | not stated | not stated | not stated |
| Weight | 9.7 pounds | not stated | 9.7 pounds | not stated | not stated | 5.51 pounds | 6.61 pounds | 9.7 pounds | not stated | not stated | not stated | not stated |
| Dimensions | not stated | 10.3 × 11.8 × 8.9 inches | 24.6 × 14.2 × 5.32 inches | not stated | not stated | 12.8 × 11.8 × 7.09 inches | 19.7 × 11.8 × 3.94 inches | 24 × 14 × 5 inches | 13 × 14.2 × 11.4 inches | 9.06 × 7.68 × 12.6 inches | 11.4 × 13 × 14.2 inches | 10.3 × 11.8 × 8.9 inches |
| Length | not stated | not stated | not stated | 12.6 inches | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Width | not stated | not stated | not stated | 12.6 inches | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Color | Blue | Blue | Blue | Blue | not stated | 3W | Blue | S9 | Blue | Metal | Blue | Blue |
| Model | S9 | xxl-iCube Pro 5W | S9 Pro | SCULPFUN C1 | iCube Ultra-12W | 3W | S9 | S9 90W | iCube Ultra 12W | SCULPFUN G9 | XXL-iCube Ultra Dual | iCube Pro Max |
| Size | not stated | iCube Pro 5W | not stated | not stated | 12W Diode | not stated | not stated | S9 | not stated | not stated | not stated | not stated |
If you engrave furniture panels, you can compare dimensions across the best wood dressers before choosing your laser workspace size.
Key Specs for Choosing Wood Engravers
-
Focus Spot Precision
Check the focus spot size for detail quality. A 0.06mm spot delivers sharp lines on wood. The S9 models offer this precision for general projects. The C1 Mini provides an even finer 0.04mm spot for intricate photo engraving. Smaller spots allow you to etch finer details. Larger spots may result in softer edges. Select a smaller spot if you prioritize sharp text or complex designs on your wooden crafts.
-
Work Area Dimensions
Compare the work area to your project size. The S9 5.5W includes a generous 16.14 x 16.34-inch area. This space handles larger wood boards comfortably. The iCube Pro has a modest bed size, limiting large pieces. The S9 Pro offers 24.6 x 14.2 inches for wider boards. Measure your typical wood blanks before buying. Ensure the machine fits your workspace and material dimensions.
-
Enclosure and Safety
Consider enclosure type for indoor use. The iCube Ultra models feature Class 1 enclosed designs. These contain smoke and protect you from laser exposure. The S9 90W has an open frame, requiring extra caution. Enclosed units are safer for home offices. Open frames offer better ventilation for large cuts. Choose an enclosed unit if you engrave wood in shared spaces or small rooms.
-
Form Factor and Portability
Assess portability based on your workspace. The C1 models are lightweight and portable. They weigh around 5.5 to 9.7 pounds. The iCube Pro fits on compact desks. The S9 Pro is heavier and less mobile. If you move your engraver often, pick a portable model. Fixed setups work well with heavier, open-frame machines that stay in one place.
-
Dual Laser Capabilities
Check for dual laser systems if you mix materials. The G9 combines a 10W diode for wood with a 2W infrared beam. This allows marking plastics and metals alongside wood engraving. Single-laser models focus on wood or acrylic only. Dual systems offer versatility for mixed-media projects. If you only engrave wood, a single laser suffices. Choose dual lasers for broader material compatibility.
Frequently asked questions
Can the SCULPFUN C1 3W cut wood?
No, the SCULPFUN C1 3W is designed for engraving only. It lacks the power needed to cut through wood. This model excels at fine detail work on small wood pieces. It is suitable for detailed photo engraving without requiring complex setup. You should choose a higher wattage model if cutting is required.
Which SCULPFUN model has the largest work area?
The SCULPFUN S9 90W Effect Laser Engraver offers the largest workspace. It features an open 410 x 420 mm area. This size allows you to cut wood up to 15mm thick. The expandable metal frame supports large DIY wood projects. It is ideal if you need to process bigger boards.
Is there a SCULPFUN engraver with auto focus for wood?
Yes, the SCULPFUN iCube Ultra 12W includes auto focus. This feature helps maintain precise engraving on wood surfaces. It delivers strong 12W optical output within a self-contained enclosure. This makes it a solid match for indoor safety and detailed engraving on smaller wood items.
Can the SCULPFUN G9 engrave both wood and plastic?
Yes, the SCULPFUN G9 Dual Laser Galvo Engraver handles both materials. It combines a 10W diode for cutting wood with a 2W infrared beam. This second beam marks plastics and metals at high galvo speeds. It delivers exceptional versatility for fast mixed-material engraving tasks.
Which SCULPFUN laser is best for detailed small wood crafts?
The SCULPFUN C1 Mini 3W is ideal for small-scale wood engraving. It provides high-resolution 0.04mm engraving in a portable package. This fine spot size is perfect for intricate wood markings. It is a practical choice when workspace and mobility matter for your craft projects.
Does the SCULPFUN iCube Ultra 12W Portable have an enclosure?
Yes, the SCULPFUN iCube Ultra 12W Portable Engraver has an enclosure. It is an enclosed Class 1 desktop format. This design provides strong 12W diode performance and fine 0.06mm detailing. It is a solid choice for compact wood engraving projects in home or office environments.