14 Best Laser Engravers for Gold, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best laser engravers for gold requires matching the right tool to your workspace and material needs. We compared 14 models based strictly on the specifications published on their listings. The Artilume Foldable 3000mW Laser Engraver leads this list because its lightweight 2.65-pound frame and foldable design make it ideal for entry-level surface marking in small spaces. This selection covers options ranging from compact diode modules to high-power fiber systems. You will use these specs to decide which machine fits your budget, portability requirements, and engraving precision goals.
Quick picks
The best fit for you
- You need the most compact model for small spaces Artilume Foldable 3000mW Laser Engraver Its 3000mW foldable design weighs only 2.65 pounds and fits in tight areas.
- You want high-speed marking for professional jewelry work OMTech 30W Fiber Laser Engraver The 30W fiber source reaches 10,000 mm/s for rapid gold marking.
- You already own a compatible SCULPFUN diode machine SCULPFUN 1064nm Infrared Laser Module This 2W 1064nm module adds 0.03mm precision metal engraving to your existing setup.
- You require heavy-duty power for dense metals OMTech 100W MOPA Fiber Laser with Rotary The 100W fiber laser delivers top-tier power for high-speed industrial metal marking.
Our 14 picks
Artilume Foldable 3000mW Laser Engraver
Best for: entry-level surface marking in small spaces
- Compatible Material
- Gold (what this guide is about)
- Laser Power
- 3000mW (3W)
- Working Area
- 200 x 150 mm
- Engraving Speed
- 10,000 mm/min
- Software Compatibility
- LightBurn, GRBL programs, Mobile App
- Form Factor
- Foldable
The Artilume Foldable 3000mW Laser Engraver is a lightweight, portable machine designed for compact work areas. It features a 3W laser diode, a 200 x 150 mm working area, and an engraving speed reaching up to 10,000 mm/min with 0.01 mm precision. If you need a starter tool for light surface marking on gold and craft materials without dedicating permanent desk space, this foldable system gives you basic capability with minimal setup.
Pros
- 200 x 150 mm workspace with 0.01 mm engraving precision
- Foldable 2.65-pound frame with a protective case that doubles as a height riser
- Supports LightBurn, GRBL software, and mobile app control
- Engraving speeds reach up to 10,000 mm/min
Cons
- 3W laser output is limited to surface marking rather than deep engraving
- Working area is limited to 200 x 150 mm
Good fit if
- You need a compact, foldable engraver that stores easily in small rooms
- You want the flexibility of operating via either a mobile app or LightBurn
- You only need to mark small items within a 200 x 150 mm area
Skip if
- You require high laser wattage for deep engraving or cutting tasks
- You work on large items that exceed 200 x 150 mm in size
Verdict: Artilume Foldable 3000mW Laser Engraver provides entry-level surface marking and high portability in a lightweight, foldable package. It is a practical starter option if you prioritize small-footprint storage over high-wattage engraving output.
Artilume T1 3W App Laser Engraver
Best for: small coated metal and wood crafts
- Compatible Material
- Wood, Metal, Acrylic, Leather, Gold (what this guide is about)
- Laser Type
- Diode
- Laser Power
- 3000mW (3W)
- Working Area
- 200 x 150 mm
- Engraving Speed
- 10,000 mm/min
- Software Compatibility
- Smartphone App
The Artilume T1 3W is a foldable diode laser engraver designed for beginners. It features 0.01mm precision and a 200x150mm working area. You can control it via smartphone app or computer software. The 3W output handles wood, leather, and coated metal. It is ideal for small crafts and gifts. The compact size fits limited spaces.
Pros
- 3W laser output with app control
- 0.01mm ultra-high precision
- 200x150mm working area
- 10,000mm/min max speed
Cons
- 3W power is lower than 7W or 30W fiber options
- 200x150mm area limits large projects
- Requires surface prep for bare metal
Good fit if
- You need app control for easy setup
- You engrave small items like coasters
- You have limited desk space
Skip if
- You require deep engraving on bare metal
- You need a large working area
- You want industrial-grade fiber power
Verdict: Artilume T1 3W App Laser Engraver is a practical entry point for home crafters who value convenience and precision over raw power. It suits those engraving small, detailed items on coated surfaces.
Artilume T1 7W Foldable Laser Engraver
Best for: portable small-item engraving on compact workbenches
- Compatible Material
- Wood, Metal, Acrylic, Leather, Gold (what this guide is about)
- Laser Power
- 7000mW (7W)
- Working Area
- 200 x 150 mm
- Engraving Speed
- 10,000 mm/min
- Software Compatibility
- LightBurn, LaserGRBL, Mobile App
- Form Factor
- Foldable
The Artilume T1 Foldable delivers 7W (7000mW) of laser power alongside a 200 x 150 mm working area, making it a portable option for small-scale projects. It features 0.01 mm engraving precision and operating speeds up to 10,000 mm/min. If you need a compact workspace setup that supports wireless smartphone management or standard desktop platforms like LightBurn and LaserGRBL, this unit fits everyday benchtop tasks.
Pros
- Foldable, preassembled frame for compact storage
- Engraving speed reaches up to 10,000 mm/min
- Detailed 0.01 mm engraving accuracy
- Supports mobile app control plus LightBurn and LaserGRBL
Cons
- Working area is limited to 200 x 150 mm
- Lower 7W output compared to higher-wattage industrial options
Good fit if
- You need a foldable machine to pack away between crafting sessions
- You prefer running small engraving jobs directly from a mobile app
- You work primarily on compact items within a 200 x 150 mm workspace
Skip if
- You require large work surfaces exceeding 200 x 150 mm
- You need high-output wattage above 7W for heavy production runs
Verdict: Artilume T1 Foldable 7000mW Laser Engraver balances a space-saving foldable design with 0.01 mm precision for small-format detailing. It gives you flexible control through either mobile apps or desktop software without taking over your workspace.
Artilume 7W Laser Engraver with Riser and Cover
Best for: compact crafting with smartphone control and taller items
- Compatible Material
- Wood, Metal, Acrylic, Leather, Gold (what this guide is about)
- Laser Power
- 7W
- Working Area
- 200 x 150 mm
- Engraving Speed
- 10,000 mm/min
- Cutting Capacity
- Up to 4mm basswood
- Form Factor
- Portable
View on Amazon: Artilume 7W Laser Engraver with Riser and Cover
This compact engraver pairs a 7000mW output with a 200x150mm working area and smartphone app control. It reaches engraving speeds up to 10,000 mm/min and maintains 0.01mm precision. The package includes a height riser module and protective cover, letting you work with taller pieces. If you need a lightweight, mobile-controlled machine that handles gold-tone projects, coated metals, and craft items, this configuration fits desktop spaces well.
Pros
- 0.01mm engraving precision for fine text and intricate patterns
- Engraving speed reaches up to 10,000 mm/min
- Includes height riser module and protective casing
- Smartphone app control eliminates need for a wired PC
- Lightweight aluminum alloy frame weighs 3 pounds
Cons
- Requires marking spray for bare metal engraving
- Working area is limited to 200x150mm
- Cutting capability is limited to thin materials like 4mm basswood
Good fit if
- You want smartphone app control instead of tethering a computer
- You need a height riser and protective casing included in the box
- You work with smaller items within a 200x150mm area
Skip if
- You need to engrave bare metals without using marking spray
- You need a larger working area than 200x150mm for oversized items
- You require high-wattage fiber laser cutting rather than diode-level power
Verdict: Artilume 7W Laser Engraver with Riser and Cover delivers 0.01mm precision and app-driven control in a portable 3-pound package. It gives you an all-in-one setup for compact crafting and coated metal marking.
OMTech 30W Fiber Laser Engraver
Best for: high-speed gold and jewelry marking
- Compatible Material
- Metal, Jewelry, Aluminum, Silver, Gold (what this guide is about)
- Laser Type
- Fiber
- Laser Power
- 30W
- Working Area
- 175 x 175mm (6.9 x 6.9 in.)
- Engraving Speed
- Up to 10,000 mm/s
- Software Compatibility
- LightBurn, EzCad2
The OMTech 30W Fiber Laser Engraver is a solid-state galvo marking machine designed for metals like gold, silver, and aluminum. It delivers marking speeds up to 10,000 mm/s across a 175 x 175 mm (6.9 x 6.9 in.) work area using an F-theta lens. Supporting both LightBurn and EzCad2, it suits jewelers, small businesses, and workshops seeking high-speed metal engraving with precise red-dot focusing.
Pros
- 30W fiber laser source rated for over 100,000 hours of service life
- Galvanometer system delivers engraving speeds up to 10,000 mm/s
- Dual software compatibility with LightBurn and Windows EzCad2
- F-theta lens limits optical distortion to less than 1%
Cons
- Rotary attachment is not included and must be purchased separately
- Heavy 65-pound build limits benchtop portability
- EzCad2 software compatibility is limited to Windows
Good fit if
- You need high-speed marking up to 10,000 mm/s on gold, silver, or other metals.
- You prefer running your laser workflow through LightBurn or Windows-based EzCad2.
- You want a dedicated 175 x 175 mm working field with red-dot focus assistance.
Skip if
- You require an out-of-the-box rotary axis for rings or curved jewelry pieces.
- You need a lightweight engraver that is easy to move between work areas.
Verdict: OMTech 30W Fiber Laser Engraver provides rapid 10,000 mm/s galvanometer marking on precious metals within a 175 x 175 mm bed. It is a capable setup for jewelers and workshops wanting broad software support and durable solid-state optics.
ComMarker B4 30W Fiber Laser Engraver
Best for: marking gold jewelry and tumblers
- Compatible Material
- Jewelry, Silver, Gold (what this guide is about)
- Laser Type
- Fiber (1064 nm)
- Laser Power
- 30W
- Working Area
- 110 x 110 mm, 200 x 200 mm
- Engraving Speed
- 0-15000 mm/s
- Software Compatibility
- LightBurn, EzCad2
This 30W fiber laser operates at a 1064 nm wavelength to mark gold, silver, jewelry, and tumblers. You get two interchangeable lenses offering 110 x 110 mm and 200 x 200 mm working areas. With galvanometer speeds up to 15,000 mm/s and a minimum line width of 0.01 mm, it suits users needing detailed precious metal engraving alongside cylindrical tumbler marking capabilities.
Pros
- High marking speed up to 15,000 mm/s
- Includes both 110 x 110 mm and 200 x 200 mm lenses
- Fine 0.01 mm minimum line width for detailed metal work
- Compatible with LightBurn and EzCad2 on Windows and macOS
- 2-in-1 desktop and handheld operation
Cons
- Roller accessories are not included in the package
- Engraving depth is limited to 0.3–0.5 mm
Good fit if
- You want to mark gold jewelry, pens, and tumblers with a 1064 nm fiber source
- You need interchangeable lenses to switch between compact and larger marking fields
- You prefer running your jobs using LightBurn or EzCad2
Skip if
- You require an included rotary roller out of the box for cylindrical items
- You need deep metal carving beyond 0.5 mm in a single pass
Verdict: ComMarker B4 30W Fiber Laser Engraver delivers rapid 15,000 mm/s galvanometer marking across dual lens sizes for gold and tumblers. It provides a solid 1064 nm desktop platform, though you must supply your own rotary hardware.
xTool 2W 1064nm IR Module for D1 Pro
Best for: xTool D1 Pro owners engraving gold jewelry
- Compatible Material
- Metal, Plastic, Silver, Gold (what this guide is about)
- Laser Type
- 1064nm Infrared
- Laser Power
- 2W
- Engraving Speed
- up to 400mm/s
- Dimensions
- 35.1 × 14.6 × 5.1 inches
This 1064nm infrared laser module upgrades your existing xTool D1 Pro frame for metalwork. With 2W of laser power, a 15kW peak power rating, and an ultra-fine 0.03 mm by 0.03 mm laser spot, it engraves precious metals including gold and silver at speeds up to 400 mm/s. It is designed specifically for D1 Pro owners who need dedicated jewelry and metal engraving capabilities without buying a separate standalone machine.
Pros
- Ultra-fine 0.03 mm by 0.03 mm laser spot size for sharp detail
- 1064nm infrared wavelength works directly on gold, silver, and copper
- Engraving speeds up to 400 mm/s on supported materials
- Reaches up to 15kW peak pulse power
Cons
- Only compatible with the xTool D1 Pro
- Requires a separate D1 Pro base machine to operate
- Continuous power is limited to 2W
Good fit if
- You already own or plan to use an xTool D1 Pro machine.
- You need to mark fine details on gold, silver, or other metals.
- You want a 0.03 mm by 0.03 mm spot size for precise jewelry work.
Skip if
- You do not own an xTool D1 Pro base unit.
- You want an all-in-one standalone engraving workstation.
- You require high continuous power above 2W for deep metal cutting.
Verdict: Makeblock xTool D1 Pro 1064nm Infrared Module delivers ultra-fine 0.03 mm precision on gold and other metals directly on your D1 Pro frame. It provides a dedicated 1064nm upgrade for jewelry crafters who already operate the base machine.
Monport 30W Raycus Fiber Laser Engraver
Best for: high-speed gold and jewelry engraving
- Compatible Material
- Metal, Silver, Gold (what this guide is about)
- Laser Type
- Fiber (Raycus)
- Laser Power
- 30W
- Working Area
- 5.9" x 5.9"
- Engraving Speed
- 10000mm/s
- Software Compatibility
- LightBurn
This fiber laser uses a 30W Raycus laser source engineered for metal marking, including gold and silver. It features a 5.9 by 5.9-inch working area, marking speeds up to 10,000 mm/s, and compatibility with LightBurn software. With a built-in workspace grid, manual focus wheel, and dual cooling fans, it suits you if you need dedicated high-speed metal marking for jewelry or small custom metal components.
Pros
- 30W Raycus fiber laser source rated for up to 100,000 hours
- Marking speeds reaching up to 10,000 mm/s
- LightBurn software compatibility
- Workspace grid with removable positioning bars and dual red-dot focus guide
Cons
- 5.9 by 5.9-inch workspace restricts jobs on larger objects
- Focus height adjustment is strictly manual via a hand wheel
Good fit if
- You need rapid marking speeds up to 10,000 mm/s on gold, silver, or brass.
- You run your laser projects using LightBurn software.
- You work on jewelry, tags, or small metal parts within a 5.9-inch square field.
Skip if
- You need an active engraving area larger than 5.9 by 5.9 inches.
- You want an automated autofocus system rather than a manual focus wheel.
Verdict: Monport 30W Fiber Laser Engraver pairs a Raycus fiber source with 10,000 mm/s speeds for detailed gold and metal marking. Its LightBurn support and grid alignment make it a reliable small-format workstation.
TEN-HIGH 30mm Gold-Plated Copper CO2 Mirrors
Best for: high-power CO2 laser beam reflection
- Compatible Material
- Gold (what this guide is about)
- Laser Type
- CO2
View on Amazon: TEN-HIGH 30mm Gold-Plated Copper CO2 Mirrors
This set includes three gold-plated oxygen-free copper mirrors designed for CO2 laser machines. Each mirror measures 30mm in diameter and 3mm in thickness with a flat plane shape. Rated for laser systems ranging from 40W to 5000W, they feature over 99.9% transmittance and high temperature resistance. If you need replacement optical components to guide your CO2 laser beam, these mirrors match higher-wattage setups.
Pros
- Compatible with CO2 laser systems from 40W up to 5000W
- Rated transmittance of greater than 99.9%
- Includes 3 gold-plated oxygen-free copper mirrors
- Standard 30mm diameter with 3mm thickness
Cons
- Component mirror pack only, not a standalone engraving machine
- Requires a laser system specifically sized for 30mm optics
Good fit if
- You need replacement reflective optics for a 40W to 5000W CO2 laser system
- You use an engraving setup configured for 30mm diameter mirror mounts
Skip if
- You need a complete, standalone laser engraving machine
- You require optics in a different diameter, such as 20mm or 25mm
Verdict: TEN-HIGH 30mm Gold-Plated Copper CO2 Laser Mirrors provide a three-piece set of high-transmittance optics rated for 40W to 5000W CO2 setups. They suit users replacing or upgrading 30mm beam path reflectors in their existing laser equipment.
OMTech 100W MOPA Fiber Laser with Rotary
Best for: high-power metal marking and curved surfaces
- Compatible Material
- Metal, Gold (what this guide is about)
- Laser Type
- Fiber
- Laser Power
- 100W
- Working Area
- 6.9 x 6.9 in., 4.3 x 4.3 in.
- Engraving Speed
- 10000 mm/s
- Software Compatibility
- LightBurn, EzCad2
This is a 100W JPT MOPA fiber laser marking machine built for metals like gold. It features an open design with a high-speed galvanometric system capable of speeds up to 10000 mm/s. You receive two lenses offering 4.3x4.3 inch and 6.9x6.9 inch work areas, along with a rotary axis for curved objects. It suits users who need high-power fiber engraving and broad software support through LightBurn and EzCad2.
Pros
- High-power 100W JPT MOPA fiber laser source
- Engraving speeds up to 10000 mm/s with 0.1 mm accuracy
- Includes two field lenses for 4.3x4.3 inch and 6.9x6.9 inch working fields
- Comes with a rotary axis and a footpad trigger for batch work
- Compatible with both LightBurn and EzCad2 software
Cons
- Heavy 76-pound footprint requires dedicated workspace
- Open design requires wearing the included protective eyewear
- Maximum work field is limited to 6.9x6.9 inches
Good fit if
- You want 100W MOPA power for fast etching on gold and other metals
- You need a rotary attachment to mark curved pieces
- You plan to design and control jobs using LightBurn or EzCad2
Skip if
- You require an enclosed laser cabinet rather than an open work area
- You need a lightweight, portable engraver you can easily relocate
- You work on large flat pieces exceeding 6.9x6.9 inches
Verdict: OMTech 100W MOPA Fiber Laser Engraver delivers top-tier 100W fiber power, versatile dual-field lenses, and rotary capabilities for high-speed metal marking.
Dereklaser 50W Raycus Fiber Engraver
Best for: direct gold and metal engraving without assembly
- Compatible Material
- Metal, Jewelry, Aluminum, Silver, Gold (what this guide is about)
- Laser Type
- Raycus Fiber
- Laser Power
- 50W (50000mW)
- Working Area
- 200x200 mm (7.8x7.8 in.)
- Software Compatibility
- EzCad2, LightBurn
- Form Factor
- Open design
The Dereklaser 50W Fiber Laser Engraver uses a 50,000 mW Raycus fiber source designed to mark metals such as gold, silver, and brass. It features a 200 by 200 mm working area, a manual focus-height wheel, and an integrated laser locator. Because it supports both LightBurn and EzCad2 with no assembly required out of the box, it suits makers looking for a ready-to-use fiber setup for detailed gold jewelry engraving.
Pros
- 50W Raycus fiber source with an estimated 100,000-hour service life
- 200 x 200 mm (7.8 x 7.8 in.) workbed with a laser locator for calibration
- Compatible with both LightBurn and EzCad2 software
- Arrives fully assembled with no machine installation required
Cons
- Heavy 115-pound weight limits portability
- Open Class 4 design requires using safety eyewear rather than a full enclosure
Good fit if
- You want a high-power 50W fiber source ready to engrave gold without assembly.
- You plan to run your jobs using LightBurn or EzCad2 software.
- You need a 200 x 200 mm work surface with a red laser locator for alignment.
Skip if
- You prefer a fully enclosed laser rather than an open Class 4 setup.
- You need a lightweight machine that is easy to move off your workbench.
Verdict: Dereklaser 50W Fiber Laser Engraver pairs a durable Raycus source with a 200 x 200 mm bed for engraving gold and other dense metals. Its pre-assembled open build and LightBurn support make it a practical metal-marking workhorse.
SCULPFUN 1064nm Infrared Laser Module
Best for: SCULPFUN owners engraving gold and fine jewelry
- Compatible Material
- Metal, Jewelry, Plastic, Silver, Gold (what this guide is about)
- Laser Type
- 1064nm Infrared
- Laser Power
- 2W
- Engraving Speed
- 400 mm/s
- Dimensions
- 5.6 × 2.2 × 2.2 inches
This add-on module upgrades your compatible diode machine into a metal-marking system. It features a 1064nm infrared laser with 2W of optical power and an ultra-fine 0.03mm spot size. Operating at speeds up to 400 mm/s, it handles gold, silver, and other jewelry metals without leaving burn marks. It suits existing frame owners who want detailed metal engraving without purchasing a full standalone unit.
Pros
- Ultra-fine 0.03mm laser spot for intricate metal detail
- 1064nm wavelength specifically targets gold, silver, and other metals
- Engraving speed reaches up to 400 mm/s
- Quick module swap process
Cons
- Requires an existing compatible SCULPFUN base machine to operate
- Low 2W output power compared to standalone fiber units
- Only compatible with S9, S30 series, S30 Ultra, SF-A9, S6 Pro, and S10 models
Good fit if
- You already own a compatible SCULPFUN laser engraver frame
- You need an ultra-fine 0.03mm spot for delicate gold jewelry work
- You want an infrared module swap rather than a full separate machine
Skip if
- You do not own a compatible SCULPFUN engraving system
- You need higher wattage for deep metal cutting or heavy relief engraving
- You want a fully self-contained standalone laser engraver
Verdict: SCULPFUN IR-2 1064nm Infrared Laser Module gives owners of compatible diode frames an efficient way to engrave gold and fine jewelry. Its 0.03mm spot delivers high detail, though it remains limited to 2W of laser output.
Cloudray 50W Portable Fiber Laser Engraver
Best for: marking gold jewelry and detailed leather goods
- Compatible Material
- Metal, Leather, Jewelry, Plastic, Gold (what this guide is about)
- Laser Type
- Fiber laser
- Laser Power
- 50W (50,000 mW)
- Working Area
- 4.3"x4.3", 6.9"x6.9", 7.9"x7.9"
- Engraving Speed
- 10,000mm/s
- Software Compatibility
- EzCad2, Lightburn
The Cloudray 50W Portable Fiber Laser Engraver delivers 50,000 mW of output power with marking speeds reaching 10,000 mm/s. It features interchangeable lenses providing working fields of 4.3 by 4.3 inches and 6.9 by 6.9 inches, expandable up to 7.9 by 7.9 inches. If you need to engrave gold jewelry, leather goods, and other metals with 0.01 mm precision, this machine handles both flat items and rings via its bundled rotary attachment.
Pros
- Includes two F-theta lenses for 4.3"x4.3" and 6.9"x6.9" work areas
- Marking speeds reach up to 10,000 mm/s with 0.01 mm precision
- Bundled with a D69 360° rotary axis attachment for rings and cylinders
- Compatible with LightBurn and EzCad2 on Windows and macOS
Cons
- Manual lift column adjustment requires physical height block changes
- Gross weight of 43 pounds limits frequent portability
Good fit if
- You need a 50W fiber unit to mark gold jewelry, brass, and leather items
- You want an included rotary attachment for engraving rings and bracelets
Skip if
- You require an automated motorized focus column instead of a manual lift
- You need a working field larger than 7.9 by 7.9 inches
Verdict: Cloudray 50W Portable Fiber Laser Engraver provides high-speed galvo performance, dual field lenses, and an included rotary attachment for marking gold, leather, and industrial metals.
SCULPFUN 1064nm Infrared Laser Module
Best for: SCULPFUN owners adding fine gold jewelry engraving
- Compatible Material
- Metal, Jewelry, Plastic, Silver, Gold (what this guide is about)
- Laser Type
- Infrared (1064nm)
- Laser Power
- 2W
- Engraving Speed
- 400 mm/s
The SCULPFUN 1064nm Infrared Laser Module is an add-on tool head designed to upgrade existing SCULPFUN frames. Featuring a 1064nm infrared wavelength, 2W of optical power, and a fine 0.03mm focal spot, it marks metals such as gold, silver, and platinum at speeds up to 400 mm/s. This unit suits you if you already operate an S9, S10, S30, or SF-A9 machine and need detailed jewelry engraving.
Pros
- 1064nm infrared wavelength tailored for gold, silver, platinum, and other metals
- Ultra-fine 0.03mm focal spot for intricate jewelry detailing
- Working speeds up to 400 mm/s
- Quick module swap design for easy installation on supported frames
Cons
- Requires a compatible SCULPFUN host machine to function
- Low 2W laser output power limits processing to surface engraving
- Hardware compatibility is restricted to specific SCULPFUN series
Good fit if
- You already own an S9, S10, S6 Pro, SF-A9, S30, or S30 Ultra engraver.
- You want to engrave fine details on gold and silver using a 0.03mm spot.
- You prefer upgrading an existing frame rather than purchasing a full standalone machine.
Skip if
- You need a self-contained laser machine ready to run without extra hardware.
- You require high optical wattage for deep metal relief carving or cutting.
- You operate an engraver from a different brand or an unsupported model line.
Verdict: SCULPFUN 1064nm Infrared Laser Module is a practical 2W upgrade that brings 0.03mm precision metal engraving to supported SCULPFUN frames. It allows you to engrave gold, silver, and other metals directly on your existing machine setup.
Specifications side by side
| Spec | Artilume Foldable 3000mW Laser Engraver | Artilume T1 3W App Laser Engraver | Artilume T1 7W Foldable Laser Engraver | Artilume 7W Laser Engraver with Riser and Cover | OMTech 30W Fiber Laser Engraver | ComMarker B4 30W Fiber Laser Engraver | xTool 2W 1064nm IR Module for D1 Pro | Monport 30W Raycus Fiber Laser Engraver | TEN-HIGH 30mm Gold-Plated Copper CO2 Mirrors | OMTech 100W MOPA Fiber Laser with Rotary | Dereklaser 50W Raycus Fiber Engraver | SCULPFUN 1064nm Infrared Laser Module | Cloudray 50W Portable Fiber Laser Engraver | SCULPFUN 1064nm Infrared Laser Module |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Laser Type | not specified | Diode | not specified | not specified | Fiber | Fiber (1064 nm) | 1064nm Infrared | Fiber (Raycus) | not specified | Fiber | Raycus Fiber | 1064nm Infrared | Fiber laser | Infrared (1064nm) |
| Laser Power | 3000mW (3W) | 3000mW (3W) | 7000mW (7W) | 7W | 30W | 30W | 2W | 30W | not specified | 100W | 50W (50000mW) | 2W | 50W (50,000 mW) | 2W |
| Working Area | 200 x 150 mm | 200 x 150 mm | 200 x 150 mm | 200 x 150 mm | 175 x 175mm (6.9 x 6.9 in.) | 110 x 110 mm, 200 x 200 mm | not specified | 5.9" x 5.9" | not specified | 6.9 x 6.9 in., 4.3 x 4.3 in. | 200x200 mm (7.8x7.8 in.) | not specified | 4.3"x4.3", 6.9"x6.9", 7.9"x7.9" | not specified |
| Engraving Speed | 10,000 mm/min | 10,000 mm/min | 10,000 mm/min | 10,000 mm/min | Up to 10,000 mm/s | 0-15000 mm/s | up to 400mm/s | 10000mm/s | not specified | 10000 mm/s | not specified | 400 mm/s | 10,000mm/s | 400 mm/s |
| Software Compatibility | LightBurn, GRBL programs, Mobile App | Smartphone App | LightBurn, LaserGRBL, Mobile App | not specified | LightBurn, EzCad2 | LightBurn, EzCad2 | not specified | LightBurn | not specified | LightBurn, EzCad2 | EzCad2, LightBurn | not specified | EzCad2, Lightburn | not specified |
| Form Factor | Foldable | Foldable | Foldable | not specified | not specified | not specified | not specified | not specified | not specified | Open design | Open design | not specified | not specified | not specified |
| Cutting Capacity | not specified | not specified | not specified | Up to 4mm basswood | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Compatible Material | Gold | Wood, Metal, Acrylic, Leather, Gold | Wood, Metal, Acrylic, Leather, Gold | Wood, Metal, Acrylic, Leather, Gold | Metal, Jewelry, Aluminum, Silver, Gold | Jewelry, Silver, Gold | Metal, Plastic, Silver, Gold | Metal, Silver, Gold | Gold | Metal, Gold | Metal, Jewelry, Aluminum, Silver, Gold | Metal, Jewelry, Plastic, Silver, Gold | Metal, Leather, Jewelry, Plastic, Gold | Metal, Jewelry, Plastic, Silver, Gold |
| Features | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Rotary Axis | not specified | Rotary Axis | not specified | not specified | not specified | not specified |
| Target Audience | DIY, Beginners | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Size | 3000mW | 3w-APP | 7W | 7w-With APP&Cover | Galvo 30W with Lightburn | not specified | For D1 Pro | not specified | Gold-Plated Copper | 100W | not specified | not specified | 27"Lx14"Wx22"H-50W US | not specified |
| Application | not specified | not specified | not specified | not specified | not specified | Tumblers | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Dimensions | 14.3 × 3.94 × 0.1 inches | 14.5 × 14.2 × 5.79 inches | 14.3 × 3.94 × 0.1 inches | 14.5 × 14.2 × 5.79 inches | not specified | 3.94 × 3.94 × 3.94 inches | 35.1 × 14.6 × 5.1 inches | 27.6 × 19.7 × 11.8 inches | not specified | 22 × 22 × 28 inches | 20 × 20 × 31 inches | 5.6 × 2.2 × 2.2 inches | 15 × 11 × 15.8 inches | not specified |
| Weight | 2.65 pounds | 3 pounds | not specified | 3 pounds | 65 pounds | not specified | not specified | not specified | not specified | 76 pounds | 115 pounds | not specified | 43 pounds | not specified |
| Color | Gold-3w With Riser Kit | GOLD-3W-App | Gold-7w With App | GOLD-7W Full Kit | Blue-White | B4R-30W+rotary | Grey | 30w+lb+d80 | D: 30mm | MOPA Basic + Rotary | Raycus-50W | Blue | Black | not specified |
| Model | T1-P-GOLD-3W | T1 | T1-app-GOLD-7W | T1 | RYGEL-FMM3RW2U1 | B4-30W rotary | P5010176 | YX1060 | not specified | RYGEL-JHW2&LRA-6000 | Raycus-50W | SF-1064NM | CLM50F | IR-2 |
Is Gold Worth It?
Gold-compatible models use specific wavelengths like 1064nm infrared or fiber sources to mark precious metals effectively. Diode modules, such as the SCULPFUN 1064nm, offer 0.03mm precision for fine jewelry on existing frames. Fiber engravers, like the OMTech 30W, provide 10,000 mm/s speeds for professional batch work. If you only mark wood or acrylic, these specialized optics add cost without benefit. Gold marking requires hardware designed for high reflectivity.
Worth it if
- You engrave fine jewelry or precious metal items regularly
- You need high-speed industrial marking for production
- You already own a compatible frame and want to add metal capability
Skip it if
- You primarily engrave wood, acrylic, or leather
- You have no need for metal marking in your workflow
- You prefer standard diode lasers for non-metal crafts
For standard office documentation, our guide covering the best laser printers with fax compares paper capacities and transmission speeds.
How We Selected Gold Engravers
We identified compatible laser engravers by scanning Amazon listings for the specific feature: Compatible Material Gold. We only included products where the listing explicitly states this capability in the title or feature list. This ensures every item on the list can mark gold surfaces as advertised. We do not physically handle or test these machines. All details come directly from the published specifications on the product pages.
The 14 products are ordered by availability first. Next, we use the listing's overall rating weighted by the number of ratings. Finally, we consider how many of our guide criteria the specs meet. This method keeps in-stock items at the top while ranking others by verified user feedback and spec alignment. You can rely on this order for your selection.
How to choose the right one
-
Match laser type to metal
You must select the correct laser source for gold. Fiber lasers, such as the OMTech 30W or Monport 30W, use galvo systems for high-speed industrial marking on precious metals. Diode infrared modules, like the SCULPFUN 1064nm, offer a lower-cost entry point for fine jewelry engraving on existing frames. Choose fiber for production speed and diode for small-scale craft projects. The technology determines your maximum output and detail level.
-
Check laser power output
Laser power dictates engraving speed and depth. Entry-level diode units, like the Artilume Foldable 3000mW, provide 3 watts for surface marking and portable crafting. Higher-power fiber units, such as the OMTech 100W MOPA, deliver 100 watts for rapid metal marking and curved surfaces. You should match the wattage to your volume. Low power suits hobbyists, while high power serves professional jewelers needing consistent, fast results on dense metals.
-
Verify form factor needs
Consider your workspace constraints when choosing a machine. Foldable designs, like the Artilume T1 7W, offer a compact footprint with a height of just 0.1 inches when closed. They weigh around 2.65 pounds, making them ideal for small desks or travel. In contrast, heavy-duty fiber engravers like the Dereklaser 50W weigh 115 pounds and require a dedicated bench. Your available space determines whether you need a portable unit or a stationary workstation.
-
Review software compatibility
Ensure the engraver supports your preferred design software. Many fiber models, including the OMTech 30W and Monport 30W, offer native LightBurn compatibility for advanced control. Some diode units rely on mobile apps or specific desktop software. The Artilume T1 3W App Laser Engraver utilizes app-driven control for convenience. Check the listing for supported programs before purchasing. Proper software integration ensures you can manage speed, power, and focus settings effectively for gold engraving.
-
Assess precision and speed
Look at spot size and marking speed for quality. Fiber lasers often reach speeds of 10,000 mm/s or 15,000 mm/s for rapid production. Diode modules, such as the xTool 2W IR, provide 0.03 mm precision for fine details. The Artilume T1 7W offers 0.01 mm precision for small-format detailing. Higher speed benefits high-volume work, while finer precision suits intricate jewelry designs. Match these specs to your required level of detail and production pace.
Frequently asked questions
Which laser engraver is best for small gold jewelry pieces?
The Artilume Foldable 3000mW Laser Engraver is ideal for small-scale gold work. It features a lightweight 2.65-pound design and a compact footprint measuring 3.94 inches wide. This model prioritizes portability and entry-level surface marking, making it suitable for detailed craft projects in limited spaces.
What is the fastest laser speed for marking gold?
The ComMarker B4 30W Fiber Laser Engraver offers the highest speed at 15,000 mm/s. This galvanometer system allows for rapid marking on gold jewelry and tumblers. It uses dual lens sizes to handle various workpiece dimensions efficiently within its desktop footprint.
Can I engrave gold on my existing diode laser machine?
Yes, you can upgrade compatible diode frames with infrared modules. The SCULPFUN 1064nm Infrared Laser Module provides 0.03mm precision for fine gold jewelry. The Makeblock xTool 1064nm IR Module is another option for D1 Pro owners seeking dedicated metal engraving capabilities.
Which fiber laser engraver supports LightBurn software?
Several fiber models support LightBurn for precise control. The OMTech 30W, Monport 30W, Dereklaser 50W, and OMTech 100W all feature explicit LightBurn compatibility. This software support ensures reliable operation for high-speed metal marking and detailed gold engraving tasks.
What is the most powerful fiber laser for gold engraving?
The OMTech 100W MOPA Fiber Laser Engraver delivers the highest power at 100W. It includes rotary capabilities and dual-field lenses for versatile marking on curved gold surfaces. This unit weighs 76 pounds and is designed for high-power industrial metal marking.
Are there portable fiber laser options for gold?
The Cloudray 50W Portable Fiber Laser Engraver is designed for mobility. It weighs 43 pounds and includes a rotary attachment for marking gold jewelry and leather. This model combines high-speed galvo performance with portability for flexible workspace setups.
Do I need a rotary axis for cylindrical gold items?
A rotary axis is essential for marking cylindrical gold items like tumblers. The ComMarker B4 30W requires you to supply your own rotary hardware. In contrast, the OMTech 100W and Monport 30W include rotary features for seamless curved surface engraving.
What precision can I expect from a 3000mW diode module?
The Artilume Foldable 3000mW Laser Engraver is suited for entry-level surface marking. While specific precision metrics are not listed for this 3W model, it is designed for small-footprint storage and portable crafting. It serves as a practical starter option for basic gold marking.