The Best VEVOR Laser Engravers in 2026: 12 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide covers the best VEVOR laser engravers for your workshop needs. We compared 12 models based strictly on published specifications. VEVOR offers a wide range of options, from compact portable handheld units to large-format CO2 floor models. The top pick is the VEVOR 100W 24 x 35 in CO2 Laser Engraver, which leads for large-format cutting and deep non-metal engraving projects. Each selection reflects specific power ratings, working areas, and feature sets found in the product data.
Quick picks
Our 12 picks
VEVOR 100W 24 x 35 in CO2 Laser Engraver
Best for: large-format cutting and deep non-metal engraving projects
- Laser Type
- CO2
- Laser Power
- 100W
- Working Area
- 24 x 35 in (600 x 900 mm)
- Engraving Speed
- Up to 19.7 ips
- Software Compatibility
- LightBurn, CorelDRAW, AutoCAD
- Cutting Capacity
- Up to 0.59 in
This heavy-duty CO2 laser machine pairs a powerful 100W tube with an expansive 24 by 35-inch bed, giving you 840 square inches of workspace. It cuts materials up to 0.59 inches thick in one pass and engraves non-metallic surfaces at speeds up to 19.7 inches per second. Front and back pass-through doors accommodate oversized stock, making it a reliable workhorse if you need high capacity and broad software compatibility.
Pros
- High-power 100W CO2 tube cuts materials up to 0.59 inches thick in one pass
- Spacious 24 x 35-inch working area with front and back pass-through doors
- Engraving speeds up to 19.7 inches per second with linear guide rails
- Works with LightBurn, CorelDRAW, and AutoCAD across Windows, macOS, and Linux
- Built-in air assist, tinted viewing window, and automatic power shutoff
Cons
- Heavy unit weighing 551 pounds requires dedicated floor space
- Only cuts and engraves non-metallic materials
- Large overall dimensions measuring 64.6 inches long by 39.4 inches wide
Good fit if
- You need to cut thick stock up to 0.59 inches in a single pass
- You work with large workpieces that benefit from front and rear pass-through access
- You plan to control your workflow using LightBurn, AutoCAD, or CorelDRAW
Skip if
- You need a compact desktop engraver that is easy to move
- You primarily intend to engrave or cut bare metal sheets
- You do not have the floor space to support a 551-pound machine
Verdict: VEVOR 100W CO2 Laser Engraver 24 x 35 delivers the highest cutting capacity and largest work envelope in the lineup for serious non-metal fabrication. It gives you industrial capability with broad cross-platform software support.
VEVOR 20W Enclosed Laser Engraver with Camera
Best for: enclosed diode cutting and camera-guided engraving
- Laser Type
- Diode (455 nm)
- Laser Power
- 20W (20000mW)
- Working Area
- 15.7 x 15.7 in
- Engraving Speed
- 30,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn, CutLabX
- Form Factor
- Enclosed (Class 1)
View on Amazon: VEVOR 20W Enclosed Laser Engraver with Camera
The VEVOR 20W Enclosed Laser Engraver combines a 20,000 mW diode module with a fully enclosed Class 1 safety structure and a built-in camera. It provides a 15.7 x 15.7-inch workspace and operates at speeds up to 30,000 mm/min, cutting 0.3-inch basswood in one pass. It suits makers who want diode cutting speed with smoke containment, auto positioning, and multi-program software compatibility.
Pros
- 20W diode laser cuts up to 0.3-inch basswood in a single pass
- Class 1 enclosed design filters light and blocks smoke and noise
- High engraving speed reaching up to 30,000 mm/min
- Built-in camera enables auto positioning across the 15.7 x 15.7-inch workspace
Cons
- Cannot cut metals or translucent and transparent acrylic
- Wi-Fi connectivity is limited to the CutLabX mobile application
- Weighs 33.7 pounds and requires dedicated desk space
Good fit if
- You want an enclosed Class 1 machine with an emergency stop and interlocks
- You need camera-assisted alignment over a 15.7 x 15.7-inch working area
- You cut wood materials up to 0.3 inches thick in single passes
Skip if
- You need to cut metal sheets or clear acrylic panels
- You want a lightweight, open-gantry engraver for easy storage
Verdict: VEVOR 20W Enclosed Laser Engraver with Camera delivers clean cutting speeds and precise alignment inside a fully enclosed safety frame. It gives you dependable workshop containment without sacrificing diode power.
VEVOR 55W CO2 Laser Engraver 20x12
Best for: Makers cutting acrylic and engraving cylindrical items
- Laser Type
- CO2
- Laser Power
- 55W
- Working Area
- 20 x 12 in
- Engraving Speed
- Up to 500 mm/s
- Software Compatibility
- LightBurn, RDWorks
- Cutting Capacity
- ≤ 7 mm acrylic, ≤ 5 mm wood
This desktop CO2 laser cutter delivers 55W of power across a 20 x 12 inch work area. It reaches speeds up to 500 mm/s and cuts materials like 7 mm acrylic and 5 mm wood. An integrated 5MP camera and auto-focus system streamline alignment on flat stock, while an included rotary axis lets you work on curved items. It suits makers who need multi-material cutting with precise digital layout tools.
Pros
- Includes a 5MP camera and automated focus adjustment
- Comes with a rotary axis for cylindrical items
- Rated to cut up to 7 mm acrylic and 5 mm wood
- Works with both LightBurn and RDWorks software
- Built-in air-assist system and pull-out waste tray
Cons
- Heavy desktop footprint at 121 pounds
- Cannot engrave bare, uncoated metals
- Laser tube lifespan rated at 3,500+ hours
Good fit if
- You want visual camera positioning and auto-focusing for quick material setup
- You need to engrave cylindrical objects straight out of the box using an included rotary tool
- You work with non-metals like acrylic up to 7 mm or wood up to 5 mm thick
Skip if
- You require direct engraving capabilities on bare, uncoated metals
- You need a lightweight, portable machine that can be easily moved alone
Verdict: VEVOR 55W CO2 Laser Engraver 20x12 balances mid-range CO2 power with practical camera alignment and an included rotary axis. It gives you solid cutting capacity on wood and acrylic without stepping up to larger industrial floor units.
VEVOR 45W Desktop CO2 Laser Engraver
Best for: small non-metal projects and cylindrical engraving
- Laser Type
- CO2
- Laser Power
- 45W (45,000 mW)
- Working Area
- 12 x 8 in
- Engraving Speed
- Up to 300 mm/s
- Software Compatibility
- LightBurn, GRBL, CorelDraw, AutoCAD
- Cutting Capacity
- ≤ 3 mm wood, ≤ 5 mm acrylic
The VEVOR 45W CO2 Laser Engraver with Rotary is an enclosed desktop cutting and engraving unit. It features a 45W CO2 tube, a 12 x 8-inch working area, and speeds up to 300 mm/s. It cuts wood up to 3 mm and acrylic up to 5 mm while including built-in air assist and a rotary attachment. This setup suits you if you need fine non-metal cutting and cylindrical engraving in a compact benchtop format.
Pros
- Includes rotary axis for cylindrical items and built-in air assist
- 45W CO2 laser cuts up to 5 mm acrylic and 3 mm wood
- Broad software support including LightBurn, GRBL, CorelDraw, and AutoCAD
- Compatible with Windows, macOS, and Linux via USB connection
Cons
- Compact 12 x 8 in work area limits material sheet sizes
- Relies on manual focusing using an adjustment knob and scale
- Cannot engrave bare, uncoated metals
Good fit if
- You work on small items like coasters, keychains, phone cases, or cylindrical objects.
- You need to cut acrylic up to 5 mm or wood up to 3 mm using a CO2 beam.
- You use design software like LightBurn, CorelDraw, or AutoCAD across Windows, macOS, or Linux.
Skip if
- You need a working surface larger than 12 x 8 inches for sheet materials.
- You plan to engrave directly onto bare, uncoated metal surfaces.
- You require motorized autofocus rather than manual knob adjustments.
Verdict: VEVOR 45W CO2 Laser Engraver with Rotary delivers focused CO2 cutting and rotary engraving within an enclosed desktop design. It is a capable choice for small, precise non-metal projects and round objects.
VEVOR 20W Enclosed Diode Laser Engraver
Best for: Enclosed desktop cutting and engraving in small spaces
- Laser Type
- Diode (455 nm)
- Laser Power
- 20W (20000mW)
- Working Area
- 11.8 x 11.8 in
- Engraving Speed
- 7,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn, CutLabX
- Form Factor
- Enclosed (Class 1)
This desktop machine delivers 20W of diode laser output inside a fully enclosed Class 1 housing. You get an 11.8 by 11.8-inch work area and engraving speeds up to 7,000 mm/min, with enough power to cut through 0.3-inch basswood in a single pass. It suits hobbyists and makers who want a safe, contained setup with Wi-Fi control and offline capability for smaller craft projects.
Pros
- Class 1 protective enclosure filters light, blocks smoke, and lowers operating noise
- 20W optical output cuts up to 0.3-inch basswood in a single pass
- Fine 0.12 x 0.15 mm laser spot size powered by a 32-bit control board
- Supports Wi-Fi control via the CutLabX app alongside offline engraving
Cons
- Working area is limited to 11.8 x 11.8 inches
- Top engraving speed caps at 7,000 mm/min
- Cannot cut metals or translucent and transparent acrylics
Good fit if
- You need built-in Class 1 safety features like an enclosure, tilt stop, and emergency shutoff
- You want to cut wood up to 0.3 inches thick without an open-frame diode setup
- You prefer running jobs wirelessly or offline via the CutLabX mobile app
Skip if
- You need a larger working area than 11.8 by 11.8 inches for your projects
- You plan to cut sheet metal, copper, or clear acrylic
- You need engraving speeds higher than 7,000 mm/min for fast batch production
Verdict: VEVOR 20W Enclosed Diode Laser Engraver provides a protected workspace with solid 20W cutting power for wood and leather crafts. It gives you dependable desktop performance without requiring an open-frame diode setup.
VEVOR 10W Enclosed Laser Engraver
Best for: enclosed desktop crafting on wood and leather
- Laser Type
- Diode (455 nm)
- Laser Power
- 10W (10000mW)
- Working Area
- 11.8 x 11.8 in
- Engraving Speed
- 7,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn, CutLabX
- Form Factor
- Enclosed (Class 1)
This diode laser cutter pairs a 10W optical output with a Class 1 protective enclosure and an 11.8 x 11.8-inch workspace. It runs at speeds up to 7,000 mm/min, uses a 0.10 x 0.12 mm laser spot, and cuts up to 0.2-inch basswood in a single pass. If you want a fully enclosed desktop unit for cutting thin wood and engraving acrylic or leather without open-frame safety hazards, this fits your desk.
Pros
- Class 1 protective enclosure with built-in emergency stop and tilt protection
- Cuts up to 0.2-inch basswood in a single pass with 10W output
- Fine 0.10 x 0.12 mm laser spot powered by a 32-bit control board
- Works with LightBurn, LaserGRBL, and CutLabX via USB or Wi-Fi
Cons
- Work area is restricted to 11.8 x 11.8 inches
- Top speed of 7,000 mm/min is lower than many open-frame alternatives
- Cannot cut metals, translucent acrylic, or transparent materials
Good fit if
- You need a Class 1 safety enclosure to filter light and block smoke indoors.
- You work on compact projects within an 11.8 x 11.8-inch boundary.
- You plan to cut thin wood sheets up to 0.2 inches thick.
Skip if
- You require a workspace larger than 11.8 x 11.8 inches for larger materials.
- You need to cut metal sheets or transparent acrylic.
- You want engraving speeds faster than 7,000 mm/min.
Verdict: VEVOR 10W Enclosed Laser Engraver provides built-in safety shielding, a 10W diode module, and an 11.8 x 11.8-inch working area for desktop crafting. It manages detailed engraving and cuts wood up to 0.2 inches thick without requiring a separate housing.
VEVOR 12W Portable Handheld Laser Engraver
Best for: high-speed handheld marking and small desktop projects
- Laser Type
- Blue laser
- Laser Power
- 12W
- Engraving Speed
- 5,000 mm/s
- Software Compatibility
- LaserGRBL, LightBurn
- Form Factor
- Handheld or desktop
- Compatible Material
- Wood, Acrylic, Leather
The VEVOR 12W Portable Handheld Laser Engraver gives you a dual handheld or desktop setup weighing 7.72 pounds. It uses galvanometer technology to deliver engraving speeds up to 5,000 mm/s alongside a tight 0.08 x 0.06 mm spot size. You can run it via LightBurn, LaserGRBL, or an Android mobile app over Wi-Fi. It suits hobbyists needing high-speed marking on wood, leather, or acrylic without a bulky, stationary gantry frame.
Pros
- Engraving speeds up to 5,000 mm/s powered by galvanometer technology
- Fine 0.08 x 0.06 mm laser spot for high-precision design work
- Dual handheld or desktop operation weighing 7.72 pounds
- Works with LightBurn, LaserGRBL, and Android Wi-Fi app connectivity
Cons
- Transparent and reflective materials require a black coating before engraving
- Mobile app support is limited to Android devices
- 12W blue laser power is lower than dedicated CO2 cutters
Good fit if
- You want a lightweight, dual-use handheld and desktop engraver.
- You need high-speed marking up to 5,000 mm/s for detailed projects.
- You use Windows, macOS, or an Android phone to send jobs over Wi-Fi.
Skip if
- You rely on an iOS mobile device for wireless control.
- You need heavy-duty cutting power for thick, dense raw materials.
- You want to engrave clear glass or acrylic without applying a coating first.
Verdict: VEVOR 12W Portable Handheld Laser Engraver provides fast, 5,000 mm/s galvanometer marking in a compact 7.72-pound chassis. It is a solid pick if you need flexible desktop or handheld operation across wood, leather, and coated surfaces.
VEVOR 10W Laser Engraver (380 x 400 mm)
Best for: mid-sized wood engraving and light cutting projects
- Laser Power
- 10W
- Working Area
- 380 x 400 mm
- Engraving Speed
- 10,000 mm/min
- Software Compatibility
- LightBurn, LaserGRBL
- Cutting Capacity
- 5 mm (wood)
- Compatible Material
- Wood, Metal
This desktop machine gives you a 10W output laser paired with a 380 x 400 mm work area. It cuts wood up to 5 mm thick and achieves movement speeds up to 10,000 mm/min using a 0.08 x 0.08 mm compressed beam spot. It connects over USB and works with LightBurn and LaserGRBL. It suits makers who want a capable diode setup for detailed engraving and light cutting.
Pros
- Fine 0.08 x 0.08 mm compressed spot size for detailed engraving
- Engraving speeds reach up to 10,000 mm/min
- Compatible with LightBurn and LaserGRBL across Windows, macOS, and Linux
- Built-in emergency stop switch and 97% light-filtering protective shield
Cons
- Air assist pump is not included and must be purchased separately
- Maximum wood cutting capacity is limited to 5 mm
Good fit if
- You need a mid-sized 380 x 400 mm workspace for engraving wood, acrylic, or coated glass
- You use LightBurn or LaserGRBL via a standard USB connection
- You prioritize fine line detail and crisp edges over heavy-duty cutting depth
Skip if
- You need to cut through wood thicker than 5 mm
- You want an included air assist pump directly in the box
Verdict: VEVOR 10W Laser Engraver (380 x 400 mm) delivers fine 0.08 x 0.08 mm detail and reliable 10,000 mm/min speeds across an accessible open bed. It is a practical diode option for detailed engraving and thin sheet cutting.
VEVOR 80W CO2 Laser Engraver 20 x 28 in
Best for: workshops needing 80W cutting and pass-through capability
- Laser Type
- CO2
- Laser Power
- 80W
- Working Area
- 20 x 28 in / 500 x 700 mm
- Engraving Speed
- Up to 19.7 ips
- Software Compatibility
- LightBurn, CorelDRAW, AutoCAD
- Cutting Capacity
- Up to 0.59 in thick
The VEVOR 80W CO2 Laser Engraver 20 x 28 in provides an 80W CO2 laser tube paired with a 20 by 28-inch working area. It engraves materials at speeds up to 19.7 inches per second and cuts stock up to 0.59 inches thick in one pass. Front and rear pass-through doors allow you to process longer workpieces. This enclosed machine suits workshops needing high cutting capacity and broad software compatibility across Windows, macOS, and Linux.
Pros
- 80W CO2 laser tube cuts materials up to 0.59 inches thick in one pass
- 20 x 28-inch honeycomb work bed includes front and rear pass-through doors
- Works with LightBurn, CorelDRAW, and AutoCAD on Windows, macOS, and Linux
- Features built-in air assist, a red-dot pointer, and an automatic safety shut-off
Cons
- Heavy 282-pound weight requires dedicated floor space rather than a standard desk
- Maximum engraving speed is capped at 19.7 inches per second
Good fit if
- You need to cut materials up to 0.59 inches thick in a single pass
- You work with oversized materials that require pass-through doors
- You want an enclosed Class 1 setup with built-in air assist and emergency stop controls
Skip if
- You lack room for a large 57.1 by 35.4-inch footprint in your work area
- You need a lightweight, portable engraver that can be moved easily
Verdict: VEVOR 80W CO2 Laser Engraver 20 x 28 in delivers heavy-duty 80W cutting power and a pass-through honeycomb bed for demanding workshop projects. Its substantial 282-pound chassis is designed for stationary production rather than desktop use.
VEVOR 20W Enclosed Laser Engraver with Camera
Best for: enclosed high-speed diode engraving with camera alignment
- Laser Type
- Diode
- Laser Power
- 20W (20000mW)
- Working Area
- 19.7 x 12.6 in
- Engraving Speed
- 36,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn, Burnlab
- Form Factor
- Enclosed (Class 1)
View on Amazon: VEVOR 20W Enclosed Laser Engraver with Camera
This machine is a fully enclosed 20W diode laser engraver with a built-in camera for auto positioning. It delivers speeds up to 36,000 mm/min across a 19.7 by 12.6-inch work area and cuts through up to 0.3-inch basswood in a single pass. Featuring a Class 1 safety enclosure that filters light and smoke, it suits hobbyists and small studios seeking a secure desktop cutting and engraving setup.
Pros
- Class 1 enclosure with smoke filtering, light filtering, emergency stop, and security lock
- 20W diode output capable of cutting 0.3-inch basswood in a single pass
- Integrated camera for auto positioning across a 19.7 x 12.6-inch workspace
- High maximum movement speed reaching up to 36,000 mm/min
Cons
- Cannot cut metals, transparent acrylic, or translucent acrylic
- LaserGRBL compatibility is limited to low-speed operation on Windows
- Substantial weight at 50.7 pounds reduces tabletop portability
Good fit if
- You want an enclosed Class 1 laser workstation that blocks smoke and filters laser light.
- You need camera-assisted auto positioning to align designs precisely.
- You regularly cut wood sheets up to 0.3 inches thick.
Skip if
- You need to cut metals or clear and translucent acrylics.
- You require a lightweight, portable machine for frequent transport.
Verdict: VEVOR 20W Enclosed Laser Engraver with Camera pairs a protective Class 1 housing with high-speed 36,000 mm/min motion and camera alignment. It is a dependable choice for makers prioritizing safety features and fast diode output.
VEVOR 20W Dual Laser Engraver
Best for: High-speed auto focus marking on varied materials
- Laser Type
- Blue and IR
- Laser Power
- 20W Blue, 2W IR
- Working Area
- 6.3 x 5.5 in
- Engraving Speed
- up to 10,000 mm/s
- Software Compatibility
- LaserGRBL, LightBurn, mobile App
- Compatible Material
- Wood, Acrylic
This portable galvanometer unit pairs a 20W blue laser with a 2W infrared laser for mixed-material jobs. It delivers engraving speeds up to 10,000 mm/s across a 6.3 x 5.5-inch working area and includes auto focus alongside manual adjustment. It suits you if you need rapid desktop or handheld engraving on both organic items and bare metals without swapping hardware.
Pros
- Dual-source design with 20W blue and 2W infrared lasers
- Galvanometer engraving speeds reaching up to 10,000 mm/s
- Supports both auto focus and manual focus adjustments
- Adjustable angle design works for desktop or handheld operation
Cons
- Working area is limited to 6.3 x 5.5 inches
- Transparent or reflective materials require a black coating before engraving
- Mobile application connectivity is restricted to Android devices
Good fit if
- You want auto focus coupled with high-speed galvanometer marking.
- You engrave varied materials ranging from wood to metals like gold, copper, and steel.
- You need a portable 13.9-pound frame capable of handheld positioning.
Skip if
- You need a large cutting area beyond 6.3 x 5.5 inches.
- You rely on an iOS smartphone app for wireless control.
Verdict: VEVOR 20W Dual Laser Engraver combines dual-laser versatility and auto focus with 10,000 mm/s galvanometer marking. It delivers precise detail on both metals and organic materials within a compact, portable format.
VEVOR 10W Laser Engraver with Rotary Roller
Best for: marking aluminum and cylindrical projects with rotary support
- Laser Power
- 10W
- Working Area
- 400 x 400 mm
- Engraving Speed
- 10,000 mm/min
- Software Compatibility
- LightBurn, LaserGRBL
- Cutting Capacity
- 5mm wood
- Compatible Material
- Wood, Metal, Aluminum
This desktop diode engraver pairs a 10W laser module with an aluminum alloy build and a 400 x 400 mm workspace. It achieves movement speeds up to 10,000 mm/min with a fine 0.08 x 0.08 mm compressed beam spot. Capable of cutting up to 5mm wood and marking aluminum, it suits DIY makers and small craft shops needing cylindrical engraving via the included rotary accessory.
Pros
- Fine 0.08 x 0.08 mm compressed laser spot for detailed work
- Spacious 400 x 400 mm working area
- Includes rotary axis accessory for cylindrical items
- Works with both LightBurn and LaserGRBL software
Cons
- 10W optical output limits wood cutting capacity to 5mm
- Glass requires a black coating before engraving
- Requires a tethered USB connection to a computer
Good fit if
- You want an aluminum frame machine with a generous 400 x 400 mm work area
- You need to engrave tumblers or cylindrical objects using a rotary roller
- You run your laser projects using LaserGRBL or LightBurn over USB
Skip if
- You need to cut wood pieces thicker than 5mm in a single pass
- You require an enclosed laser cutter for your workspace
Verdict: VEVOR 10W Laser Engraver with Rotary Roller delivers a dependable aluminum build, a tight 0.08 x 0.08 mm focal spot, and out-of-the-box rotary engraving support.
Specifications side by side
| Spec | VEVOR 100W 24 x 35 in CO2 Laser Engraver | VEVOR 20W Enclosed Laser Engraver with Camera | VEVOR 55W CO2 Laser Engraver 20x12 | VEVOR 45W Desktop CO2 Laser Engraver | VEVOR 20W Enclosed Diode Laser Engraver | VEVOR 10W Enclosed Laser Engraver | VEVOR 12W Portable Handheld Laser Engraver | VEVOR 10W Laser Engraver (380 x 400 mm) | VEVOR 80W CO2 Laser Engraver 20 x 28 in | VEVOR 20W Enclosed Laser Engraver with Camera | VEVOR 20W Dual Laser Engraver | VEVOR 10W Laser Engraver with Rotary Roller |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Laser Type | CO2 | Diode (455 nm) | CO2 | CO2 | Diode (455 nm) | Diode (455 nm) | Blue laser | not specified | CO2 | Diode | Blue and IR | not specified |
| Laser Power | 100W | 20W (20000mW) | 55W | 45W (45,000 mW) | 20W (20000mW) | 10W (10000mW) | 12W | 10W | 80W | 20W (20000mW) | 20W Blue, 2W IR | 10W |
| Working Area | 24 x 35 in (600 x 900 mm) | 15.7 x 15.7 in | 20 x 12 in | 12 x 8 in | 11.8 x 11.8 in | 11.8 x 11.8 in | not specified | 380 x 400 mm | 20 x 28 in / 500 x 700 mm | 19.7 x 12.6 in | 6.3 x 5.5 in | 400 x 400 mm |
| Engraving Speed | Up to 19.7 ips | 30,000 mm/min | Up to 500 mm/s | Up to 300 mm/s | 7,000 mm/min | 7,000 mm/min | 5,000 mm/s | 10,000 mm/min | Up to 19.7 ips | 36,000 mm/min | up to 10,000 mm/s | 10,000 mm/min |
| Software Compatibility | LightBurn, CorelDRAW, AutoCAD | LaserGRBL, LightBurn, CutLabX | LightBurn, RDWorks | LightBurn, GRBL, CorelDraw, AutoCAD | LaserGRBL, LightBurn, CutLabX | LaserGRBL, LightBurn, CutLabX | LaserGRBL, LightBurn | LightBurn, LaserGRBL | LightBurn, CorelDRAW, AutoCAD | LaserGRBL, LightBurn, Burnlab | LaserGRBL, LightBurn, mobile App | LightBurn, LaserGRBL |
| Form Factor | not specified | Enclosed (Class 1) | not specified | not specified | Enclosed (Class 1) | Enclosed (Class 1) | Handheld or desktop | not specified | not specified | Enclosed (Class 1) | not specified | not specified |
| Cutting Capacity | Up to 0.59 in | 0.3 in basswood | ≤ 7 mm acrylic, ≤ 5 mm wood | ≤ 3 mm wood, ≤ 5 mm acrylic | 0.3 in basswood | 0.2 in basswood | not specified | 5 mm (wood) | Up to 0.59 in thick | 0.3 in basswood | not specified | 5mm wood |
| Compatible Material | Wood, Acrylic, Fabric | Wood, Metal, Leather, Glass, Paper | Wood, Acrylic, Glass | Wood, Acrylic, Glass | Wood, Metal, Leather, Glass | Wood, Metal, Leather, Glass | Wood, Acrylic, Leather | Wood, Metal | Wood, Acrylic, Fabric | Wood, Metal, Leather, Glass, Paper | Wood, Acrylic | Wood, Metal, Aluminum |
| Features | Air Assist | Enclosure, Camera | Rotary Axis, Camera | Air Assist, Rotary Axis | Enclosure | Enclosure | not specified | not specified | Air Assist | Enclosure, Camera | Auto Focus | Rotary Axis |
| Target Audience | not specified | not specified | not specified | not specified | not specified | not specified | DIY | not specified | not specified | not specified | DIY | not specified |
| Dimensions | 64.6 × 39.4 × 39.4 inches | 24.1 × 25 × 9.84 inches | 40.4 × 22.8 × 10.2 inches | 31.9 × 20.5 × 10.2 inches | 21.6 × 18.8 × 8.43 inches | 21.6 × 18.8 × 8.43 inches | 8.66 × 6.3 × 12.4 inches | 22.9 × 22.2 × 8.5 inches | 57.1 × 35.4 × 29.5 inches | 31.1 × 24 × 10.3 inches | 11.1 × 8.86 × 16.1 inches | 25.2 × 22.8 × 10.6 inches |
| Weight | 551 pounds | 33.7 pounds | 121 pounds | 64 pounds | 16.1 pounds | 15 pounds | 7.72 pounds | 9.48 pounds | 282 pounds | 50.7 pounds | 13.9 pounds | 14.3 pounds |
| Size | Working Area: 24" x 35" | not specified | Working Area: 20" x 12" | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 11.1 × 8.86 × 16.06 in | not specified |
| Color | Orange | Grey | Black | Orange+black | Grey | Grey | Gray + Orange | Black | Orange | Black | Gray + Orange | Gray |
| Model | KH9060 | L8 | SH-530 | SH-3020 | JL3PRO | JL3PRO | Nano Pro | 10W | KH7050 | P3 Pro | Nano Duo | A7 |
VEVOR Laser Engraver Specifications Overview
VEVOR’s lineup splits into CO2 and diode categories. The 100W and 80W CO2 models, like the VEVOR 100W 24 x 35 in CO2 Laser Engraver, offer industrial cutting for wood and acrylic. The 55W VEVOR 55W CO2 Laser Engraver 20x12 balances power with desktop form factors.
Diode options range from enclosed desktop units to portable handhelds. The VEVOR 20W Enclosed Laser Engraver with Camera provides safety and precision for varied materials. For mobile marking, the VEVOR 12W Portable Handheld Laser Engraver delivers high-speed galvanometer performance. Choose based on your required work envelope and material type.
Where VEVOR fits
VEVOR suits makers who need specific form factors, from handheld portability to industrial floor units. You can choose compact 10W diode engravers for small desktop spaces or enclosed 20W models with cameras for safety. Mid-range 45W and 55W CO2 desktop units handle acrylic and cylindrical projects. Large-format 80W and 100W CO2 machines provide heavy-duty cutting for workshops. The range covers open beds, enclosed frames, and galvanometer handhelds. However, there are no fiber lasers for deep metal marking or water-cooled systems in this list. You must match your material thickness and workspace size to these distinct categories.
If you also need to join metal workpieces, you can compare technical specifications for the best VEVOR welders.
How to choose the right VEVOR laser
-
Choose CO2 or diode
Decide between CO2 and diode lasers based on your primary material. CO2 units, like the VEVOR 100W 24 x 35 in CO2 Laser Engraver, excel at cutting thick wood and acrylic. Diode models, such as the VEVOR 20W Enclosed Laser Engraver with Camera, are better for marking metals and glass. CO2 lasers offer deeper penetration for fabrication. Diode lasers are often more compact and energy-efficient. Select the type that matches the materials you use most often.
-
Match power to thickness
Laser power determines how thick a material you can cut. A 10W diode, like the VEVOR 10W Laser Engraver (380 x 400 mm), handles thin sheets and detailed engraving. Higher power, like the 100W CO2 unit, cuts through dense wood quickly. The VEVOR 20W models offer a middle ground for moderate cutting tasks. Check the wattage against your material thickness needs. Higher wattage means faster cuts but also higher energy use. Match the spec to your production volume.
-
Check working area size
The working area dictates the maximum size of your projects. The VEVOR 100W model offers a massive 24 x 35 inch envelope for large-format cutting. Smaller units, like the VEVOR 45W Desktop CO2 Laser Engraver, provide a 20 x 12 inch area suitable for desktop work. Ensure your largest project fits within these dimensions. Consider if you need pass-through capability for long materials. Measure your workspace to ensure the machine fits. Larger areas require more floor space and heavier support.
-
Evaluate safety features
Safety is critical when operating high-power lasers. Enclosed models, like the VEVOR 20W Enclosed Laser Engraver with Camera, provide Class 1 safety by containing laser light. This is essential for home workshops or shared spaces. Open-frame diode units require strict safety protocols. The VEVOR 10W Enclosed Laser Engraver adds built-in shielding for beginners. Check if the unit includes an emergency stop or interlock switches. Enclosed designs reduce the risk of eye injury and fire hazards.
-
Verify software compatibility
Software support affects your workflow efficiency. Many VEVOR CO2 models, including the VEVOR 55W CO2 Laser Engraver 20x12, support LightBurn. This professional software offers precise control over power and speed. Diode models may use proprietary apps or basic drivers. Check the listed software compatibility before purchasing. LightBurn compatibility allows for advanced vector editing and layer management. Ensure your current software stack works with the machine. This avoids costly additional purchases and streamlines your design process.
Frequently asked questions
Which VEVOR laser engraver has the largest working area?
The VEVOR 100W 24 x 35 in CO2 Laser Engraver offers the largest workspace at 24 by 35 inches. This model features a 100W CO2 laser and weighs 551 pounds. It is designed for large-format cutting and deep non-metal engraving projects.
Do any VEVOR models include a rotary axis?
Yes, several models support rotary engraving. The VEVOR 55W CO2 Laser Engraver 20x12 includes a rotary axis for cylindrical items. The VEVOR 45W Desktop CO2 Laser Engraver also features a rotary axis. The VEVOR 10W Laser Engraver with Rotary Roller provides out-of-the-box rotary support.
Which VEVOR engraver is best for marking metal?
The VEVOR 20W Dual Laser Engraver is ideal for marking metal. It uses dual-laser technology and auto focus to deliver precise detail on metals and organic materials. The VEVOR 10W Laser Engraver with Rotary Roller also marks aluminum with a tight focal spot.
Is there a handheld VEVOR laser engraver?
The VEVOR 12W Portable Handheld Laser Engraver is designed for handheld marking. It features a compact 7.72-pound chassis and fast 5,000 mm/s galvanometer marking. This unit is suitable for flexible desktop or handheld operation across wood, leather, and coated surfaces.
Which VEVOR model includes a camera for alignment?
Three models feature camera alignment systems. The VEVOR 20W Enclosed Laser Engraver with Camera (model L8) provides precise alignment inside a fully enclosed frame. The VEVOR 55W CO2 Laser Engraver 20x12 includes practical camera alignment. The VEVOR 20W Enclosed Laser Engraver with Camera (model P3 Pro) also pairs camera alignment with high-speed motion.
What is the fastest engraving speed among VEVOR models?
The VEVOR 20W Enclosed Laser Engraver with Camera (model P3 Pro) offers the highest speed at 36,000 mm/min. The VEVOR 20W Dual Laser Engraver reaches 10,000 mm/s. The VEVOR 12W Portable Handheld unit also provides fast 5,000 mm/s marking.
Which VEVOR laser engraver is the lightest?
The VEVOR 10W Laser Engraver (380 x 400 mm) is the lightest at 9.48 pounds. The VEVOR 12W Portable Handheld Laser Engraver weighs 7.72 pounds. The VEVOR 10W Laser Engraver with Rotary Roller weighs 14.3 pounds. These are all portable or desktop-friendly options.