SCULPFUN S9 Upgrade Kit to Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The SCULPFUN S9 Upgrade Kit to 33W transforms an existing S9 machine into a high-power cutter. If you are researching sculpfun s9 upgrade kit to alternatives, you likely need deeper cutting capacity or different form factors. This kit adds a 33W diode laser, a 32-bit motherboard, and automatic air support to your current setup. It allows you to cut 20mm balsa wood and 15mm plywood, which the original 5.5W module cannot handle.
You might prefer a standalone unit or a different size. Some buyers want enclosed safety or camera precision rather than an upgrade module. Others need portable engraving or higher raw power for batch production. We selected these 6 picks because their specifications overlap with the original product’s core needs. Each option offers distinct features like auto-focus, rotary axes, or smoke purification. Review the specs below to find the best fit for your workspace and material requirements.
How each alternative compares
xTool M2 20W Enclosed Laser Engraver
The xTool M2 20W trades raw cutting power for safety and precision. It offers 20W of laser output, which is lower than the S9 Upgrade Kit’s 33W. You lose the ability to cut thick materials like 20mm balsa wood. However, it includes a camera for precise alignment and an enclosure for safer home use. It is ideal for paper, leather, and thin wood. Choose this if you prioritize safety and accuracy over deep cutting. It lacks the high-power diode needed for thick stock.
xTool SafetyPro AP2 Smoke Purifier
The xTool SafetyPro AP2 is not a laser engraver but a smoke purifier. It measures 290x491x542mm and weighs 46.1 pounds. It is designed for heavy-duty dust and odor removal. It fits best in fixed workspaces where its large dimensions are manageable. It does not engrave or cut materials. Use this alongside your S9 Upgrade Kit to improve air quality. It is a robust filtration solution for users prioritizing health and safety. It requires a separate laser source to function.
LaserPecker LP2 Plus Portable Laser Engraver
The LaserPecker LP2 Plus 10W is a portable engraver with 10W laser power. It is much lighter and smaller than the S9 Upgrade Kit. It measures 7.01x11.4x11.2 inches. It prioritizes portability and speed over raw cutting power. It is ideal for mobile engraving tasks on wood, metal, acrylic, and leather. It cannot cut thick materials like the 33W kit. Choose this if you need to engrave cylindrical objects or work on the go. It lacks the enclosed safety and high power of the S9.
Creality Falcon2 Pro S 22W Desktop Laser
The Creality Falcon2 Pro S 22W Desktop offers 22W of laser power. It is enclosed, providing safety for small studios. It includes air assist, a camera, and auto focus. It measures 22x12.9x26 inches and weighs 49.3 pounds. It is better for batch production than the open S9 kit. It handles wood and acrylic well. It lacks the 33W power for thick cutting. Choose this if you need a contained, safe unit for detailed work. It offers modern features like auto focus that the S9 kit lacks.
ATOMSTACK 48W Laser Engraver with Rotary Chuck
The ATOMSTACK 48W Laser Engraver delivers 48W of raw power. It is significantly more powerful than the S9 Upgrade Kit’s 33W. It includes a rotary axis for jewelry and cylindrical items. It is ideal for high-speed cutting and batch production. It lacks an enclosure, making it less safe for home use. It is better for users who prioritize cutting capacity and versatility over smart features. Choose this if you need to cut thicker materials or engrave jewelry. It is a heavy-duty machine for professional results.
Creality Falcon A1 Pro 20W Enclosed Engraver
The Creality Falcon A1 Pro 20W Enclosed Engraver offers 20W of laser power. It is enclosed, safe, and includes auto focus and a camera. It measures 22.3x18.4x8.3 inches. It is ideal for precise auto-focus engraving in enclosed spaces. It lacks the 33W power of the S9 kit for thick cutting. It is better for detailed work on wood, metal, and acrylic. Choose this if you prioritize precision and safety over raw cutting speed. It is a reliable unit for users who need accurate, contained operation.
Quick picks
Our 7 picks
Sculpfun S9 Upgrade Kit to 33W
Best for: Existing S9 owners needing deeper cuts
- Laser Type
- Diode
- Laser Power
- 33W (33000mW)
- Cutting Capacity
- 20mm balsa wood, 15mm plywood
View on Amazon: Sculpfun S9 Upgrade Kit to 33W Affiliate link
This kit upgrades your Sculpfun S9 to S30 Ultra 33W performance. It includes a 33W diode laser, 32-bit motherboard, and air assist. The system cuts 20mm balsa wood and 15mm plywood. The 32-bit board adds Bluetooth control and faster processing. Limit switches enable precise home positioning for batch work. You get cleaner cuts with less smoke thanks to the 13.5m/s air speed.
Pros
- 33W diode laser output for deeper cutting
- Upgraded 32-bit motherboard for faster processing
- Automatic air assist reduces smoke and lens damage
- Includes limit switches for accurate positioning
- Bluetooth connectivity for wireless control
Cons
- Class IV laser requires strict safety precautions
- Requires manual assembly of upgrade components
- Open-frame design lacks enclosed safety housing
Good fit if
- You already own a Sculpfun S9 machine
- You need to cut thicker wood materials
- You want automated air assist features
Skip if
- You prefer a ready-to-use enclosed system
- You lack experience with Class IV lasers
- You want a completely new machine setup
Verdict: Sculpfun S9 Upgrade Kit to 33W transforms your existing S9 into a high-power cutter. It fits users who already have the base machine and need deeper cutting capacity for thicker materials.
xTool M2 20W Enclosed Laser Engraver
Best for: Safe home crafting with camera precision
- Laser Type
- Diode
- Laser Power
- 20W (20000mW)
- Software Compatibility
- xTool Studio
- Form Factor
- Fully enclosed Class 1
- Compatible Material
- Wood, Leather, Paper, Fabric
- Features
- Enclosure, Camera
View on Amazon: xTool M2 20W Enclosed Laser Engraver Affiliate link
The xTool M2 is a Class 1 enclosed laser engraver with a 20W diode laser. It features built-in dual cameras for real-time preview and precise alignment. The system runs on xTool Studio software, offering templates and AI tools. It supports wood, leather, paper, and fabric. The design prioritizes safety for home use. You can add modules like CMYK inkjet or IR lasers separately. This unit is ideal for makers who want a contained workspace.
Pros
- Class 1 enclosed safety design
- 20W (20000mW) diode laser power
- Built-in dual cameras for vision control
- xTool Studio software with AI integration
Cons
- CMYK inkjet module sold separately
- 3W IR laser sold separately
- RA3 Lite rotary accessory sold separately
Good fit if
- You need a fully enclosed Class 1 machine
- You want dual-camera precision for placement
- You engrave paper, wood, or leather at home
Skip if
- You require immediate full-color printing without extra purchases
- You need to engrave metals without buying the IR module
- You prefer an open-frame desktop engraver
Verdict: The xTool M2 20W Class 1 Laser Engraver fits home crafters who value safety and camera-guided accuracy. It handles paper and wood well but requires separate module purchases for color or metal work.
xTool SafetyPro AP2 Smoke Purifier
Best for: Heavy-duty dust and odor removal
- Laser Type
- Fiber
- Dimensions
- 25.6 × 16.1 × 26.4 inches
- Weight
- 46.1 pounds
View on Amazon: xTool SafetyPro AP2 Smoke Purifier Affiliate link
The xTool SafetyPro AP2 is a fiber laser smoke purifier designed to protect your workspace. It uses a 6-layer filtration system with SuperCyclone Technology to remove 99.99% of dust and odors. Weighing 46.1 pounds, it offers substantial purification. The unit features an Ultra-Dense Carbon Mesh filter and auto-syncs with compatible lasers. It suits users needing heavy-duty air cleaning for diode or CO2 systems under 150 m³/h extraction.
Pros
- 6-layer filtration removes 99.99% of dust and odors
- SuperCyclone Technology captures 99% of large particles before filters
- Ultra-Dense Carbon Mesh filter absorbs harmful chemicals
- Auto-syncs with xTool lasers for tailored material settings
Cons
- Heavy at 46.1 pounds, limiting portability
- Not compatible with xTool P3 due to high fume extraction
- Large footprint requires significant desk or floor space
Good fit if
- You run a laser engraver with fume extraction under 150 m³/h
- You need to remove odors and harmful chemicals from your workspace
- You want a purifier that auto-syncs with your laser settings
Skip if
- You use an xTool P3 laser engraver
- You need a portable unit for small or mobile setups
- Your laser system has a fume extraction rate above 150 m³/h
Verdict: xTool SafetyPro AP2 Smoke Purifier is a robust air cleaning solution for users prioritizing heavy-duty filtration and chemical odor removal. It fits best in fixed workspaces where its 46.1-pound weight and large dimensions are manageable.
LaserPecker LP2 Plus Portable Laser Engraver
Best for: portable engraving and cylindrical objects
- Laser Type
- Diode
- Laser Power
- 10W
- Engraving Speed
- 4000mm/s
- Cutting Capacity
- Up to 6mm basswood
- Compatible Material
- Wood, Metal, Acrylic, Leather
- Form Factor
- Portable
View on Amazon: LaserPecker LP2 Plus Portable Laser Engraver Affiliate link
The LaserPecker LP2 Plus is a portable 10W diode laser engraver weighing just 3.39kg. It features a 4000mm/s engraving speed and cuts up to 6mm basswood in a single pass. The bundle includes the SpinTrack module for trolley and cylinder modes. You get dual red-dot focus for quick alignment. This unit suits users needing mobility and speed for small to medium projects.
Pros
- 10W diode laser with 4000mm/s engraving speed
- Cuts up to 6mm basswood in one pass
- SpinTrack module enables trolley and cylinder modes
- Weighs only 3.39kg for easy portability
- Dual red-dot focus for instant alignment
Cons
- 10W power is lower than 20W+ alternatives
- No enclosed safety housing listed in data
- Limited to 6mm cutting capacity on basswood
Good fit if
- You need a lightweight unit for travel
- You engrave cylindrical items like bottles
- You want fast engraving speeds under 4000mm/s
Skip if
- You require high-power cutting over 6mm
- You need an enclosed Class 1 safety design
- You prefer stationary desktop units with larger beds
Verdict: LaserPecker LP2 Plus Portable 10W fits hobbyists who prioritize portability and speed over raw cutting power. It is ideal for mobile engraving tasks rather than heavy-duty production.
Creality Falcon2 Pro S 22W Desktop Laser
Best for: small studios needing safe, high-speed batch production
- Laser Type
- Diode
- Laser Power
- 22W
- Engraving Speed
- 600mm/s (up to 500mm/s)
- Form Factor
- Fully enclosed
- Cutting Capacity
- 15mm basswood, 10mm black acrylic
- Compatible Material
- Wood, Acrylic
View on Amazon: Creality Falcon2 Pro S 22W Desktop Laser Affiliate link
The Creality Falcon2 Pro S 22W is a fully enclosed desktop laser engraver designed for high-speed batch production. It delivers 22W of optical power, enabling one-pass cutting through 15mm basswood and 10mm black acrylic. The unit features a built-in camera for intelligent auto focus and precise positioning. With a work area of 22 by 12.9 inches, it suits small studios and makers seeking reliable, contained operation.
Pros
- 22W optical output for thick material cutting
- Fully enclosed Class 1 safety design
- Built-in camera with auto focus
- Integrated debris drawer for easy cleaning
Cons
- Heavier build at 49.3 pounds
- Smaller work area than larger desktop models
- No mention of mobile app control
Good fit if
- You need a fully enclosed Class 1 machine
- You require auto focus for varied material thicknesses
- You want quick setup with minimal assembly
Skip if
- You need to cut materials thicker than 15mm basswood
- You require a larger workspace than 22 by 12.9 inches
- You prefer a lightweight, portable unit
Verdict: The Creality Falcon2 Pro S 22W Desktop fits makers who prioritize safety and speed in a contained unit. Its enclosed design and auto focus make it ideal for small studios handling batch production.
ATOMSTACK 48W Laser Engraver with Rotary Chuck
Best for: High-speed cutting and rotary engraving
- Laser Power
- 24W / 48W (48,000 mW)
- Engraving Speed
- 500 mm/s (30,000 mm/min)
- Software Compatibility
- LightBurn, LaserGRBL
- Cutting Capacity
- 18 mm basswood
- Compatible Material
- Wood, Metal, Acrylic, Leather, Jewelry
- Features
- Air Assist, Rotary Axis
View on Amazon: ATOMSTACK 48W Laser Engraver with Rotary Chuck Affiliate link
The ATOMSTACK A40 Pro V2 is a 48W diode laser engraver with a 500mm/s engraving speed. It features an auto air assist system and includes an R8 rotary chuck for cylindrical objects. You can switch between 24W and 48W output using a physical button. This machine suits users needing high power for cutting thick materials like 18mm basswood. It works with LightBurn and LaserGRBL software.
Pros
- 48W output power for heavy-duty cutting
- 500mm/s high engraving speed
- Includes R8 rotary chuck for cylinders
- Auto air assist system for cleaner cuts
- Physical button for 24W/48W mode switching
Cons
- No built-in camera for real-time preview
- Requires assembly within 20-30 minutes
- Limited to 10-inch work area
Good fit if
- You need high power for thick materials
- You engrave cylindrical items frequently
- You prefer physical controls over app-only setup
Skip if
- You require a fully enclosed Class 1 machine
- You need a built-in camera for precision
- You want a plug-and-play device with no assembly
Verdict: Atomstack A40 Pro V2 48W Laser Engraver delivers raw power and speed for batch production. It is ideal for users who prioritize cutting capacity and rotary versatility over enclosed safety or smart features.
Creality Falcon A1 Pro 20W Enclosed Engraver
Best for: Precise auto-focus engraving in enclosed spaces
- Laser Power
- 20W
- Engraving Speed
- 600mm/s
- Software Compatibility
- Creality Falcon Design Space
- Form Factor
- Class 1 Safety Enclosed
- Cutting Capacity
- 10mm wood board or 13mm acrylic board
- Compatible Material
- Wood, Metal, Acrylic
View on Amazon: Creality Falcon A1 Pro 20W Enclosed Engraver Affiliate link
The Creality Falcon A1 Pro is a Class 1 enclosed laser engraver with 20W blue laser power. It features an HD smart camera for auto-focus within 3 seconds and supports 600mm/s engraving speeds. The unit includes air assist and a touchscreen interface. You get real-time monitoring via the Creality Falcon Design Space app. This model suits users who need precise positioning and safety certifications for home or small studio use.
Pros
- 20W blue laser module for precise engravings
- HD camera with 3-second auto-focus
- Class 1 enclosed safety design
- Smart touchscreen interface
- Air assist included
Cons
- IR module is optional and not included
- Exhaust requires outdoor connection or purifier
- Heavy at 37 pounds
Good fit if
- You need auto-focus for precise positioning
- You want a Class 1 enclosed safety design
- You prefer touchscreen control over cables
Skip if
- You need immediate IR laser capability
- You cannot vent exhaust outdoors
- You require a lightweight portable unit
Verdict: The Creality Falcon A1 Pro 20W Enclosed Laser delivers reliable auto-focus and safety for detailed work. It fits users who prioritize precision and enclosed operation over raw cutting speed.
Specifications side by side
| Spec | Sculpfun S9 Upgrade Kit to 33W | xTool M2 20W Enclosed Laser Engraver | xTool SafetyPro AP2 Smoke Purifier | LaserPecker LP2 Plus Portable Laser Engraver | Creality Falcon2 Pro S 22W Desktop Laser | ATOMSTACK 48W Laser Engraver with Rotary Chuck | Creality Falcon A1 Pro 20W Enclosed Engraver |
|---|---|---|---|---|---|---|---|
| Laser Type | Diode | Diode | not stated | Diode | Diode | not stated | not stated |
| Laser Power | 33W (33000mW) | 20W (20000mW) | not stated | 10W | 22W | 24W / 48W (48,000 mW) | 20W |
| Engraving Speed | not stated | not stated | not stated | 4000mm/s | 600mm/s (up to 500mm/s) | 500 mm/s (30,000 mm/min) | 600mm/s |
| Software Compatibility | not stated | xTool Studio | not stated | not stated | not stated | LightBurn, LaserGRBL | Creality Falcon Design Space |
| Form Factor | not stated | Fully enclosed Class 1 | not stated | not stated | Fully enclosed | not stated | Class 1 Safety Enclosed |
| Cutting Capacity | 20mm balsa wood, 15mm plywood | not stated | not stated | Up to 6mm basswood | 15mm basswood, 10mm black acrylic | 18 mm basswood | 10mm wood board or 13mm acrylic board |
| Compatible Material | not stated | Wood, Leather, Paper, Fabric | not stated | Wood, Metal, Acrylic, Leather | Wood, Acrylic | Wood, Metal, Acrylic, Leather, Jewelry | Wood, Metal, Acrylic |
| Features | not stated | Enclosure, Camera | not stated | not stated | Enclosure, Air Assist, Camera, Auto Focus | Air Assist, Rotary Axis | Enclosure, Air Assist, Camera, Auto Focus |
| Target Audience | not stated | DIY | not stated | not stated | not stated | not stated | not stated |
| Size | S9 Up 33W | 20W | 290*491*542mm | LP2 Plus Suit | Falcon2 Pro-22W with Integrated Enclosure | A40 PRO V2 + R8 | 22.3*18.4*8.3 inch |
| Dimensions | not stated | not stated | 25.6 × 16.1 × 26.4 inches | 11.2 × 7.01 × 11.4 inches | 26 × 22 × 12.9 inches | 10 × 10 × 10 inches | 5 × 3 × 1 inches |
| Weight | not stated | not stated | 46.1 pounds | not stated | 49.3 pounds | not stated | 37 pounds |
| Color | not stated | M2 Basic | White+Black | LP2 Plus (SpinTrack) | Falcon2 Pro S 22W | Black | A1 Pro-20W-White |
| Model | not stated | MLM-K610-001 | MAX-S300-P01 | LP2 Plus | Falcon2 pro 22W | A40 Pro V2+R8 | Creality Falcon A1 PRO |
If you also evaluate resin hardware, inspect phrozen 16k upgrade kit sonic alternatives to compare optical resolution and print dimensions.
Frequently asked questions
Can the xTool M2 20W cut thick wood like the S9 Upgrade Kit?
No, it cannot. The xTool M2 20W has only 20W of laser power, which is significantly lower than the S9 Upgrade Kit’s 33W. This lower output limits its ability to cut through thick materials. It works well for paper, wood, and leather engraving but lacks the depth for heavy cutting tasks.
Is the LaserPecker LP2 Plus suitable for heavy production work?
No, it is not. The LaserPecker LP2 Plus is a portable 10W diode laser designed for hobbyists who need mobility. It prioritizes speed and portability over raw cutting power. It is ideal for mobile engraving tasks rather than heavy-duty batch production or thick material cutting.
Does the Creality Falcon2 Pro S include an enclosure for safety?
Yes, it does. The Creality Falcon2 Pro S 22W comes with an integrated enclosure. This enclosed design provides safety for small studios handling batch production. It also features auto-focus and air assist, making it a contained unit for safer operation compared to open-frame machines.
What is the weight of the xTool SafetyPro AP2 Smoke Purifier?
The xTool SafetyPro AP2 Smoke Purifier weighs 46.1 pounds. It is a robust air cleaning solution with large dimensions of 290 by 491 by 542mm. Its substantial weight makes it best suited for fixed workspaces where moving it frequently is not required.
Does the ATOMSTACK A40 Pro V2 support rotary engraving?
Yes, it does. The ATOMSTACK A40 Pro V2 48W Laser Engraver includes a rotary axis feature. This allows for versatile engraving on cylindrical objects. It delivers high-speed cutting and is ideal for users who prioritize cutting capacity and rotary versatility over enclosed safety features.
Can the Creality Falcon A1 Pro handle metal engraving?
Yes, it can. The Creality Falcon A1 Pro 20W Enclosed Laser is compatible with wood, metal, and acrylic. It features auto-focus and an enclosure for precise, safe operation. This makes it suitable for detailed work on various materials, including metal, within a contained environment.