Laservii M1s IR2w Infrared Laser Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Laservii M1s IR2w Infrared Laser Alternatives list helps you find machines that share its core strengths. The original model excels at precise metal marking using a 1064nm infrared source. It delivers a 285 x 205 mm work area inside a fully enclosed safety housing. You might look elsewhere if you need higher power for thick cutting or a larger workspace. Some buyers prefer blue diode lasers for wood and acrylic, or they want integrated cameras for easier alignment. The alternatives were chosen because their specs overlap with the original in key areas like enclosure design, connectivity, or material compatibility. This comparison covers 6 similar picks ranked by their practical utility. You can compare laser types, power outputs, and software support side by side. Each option addresses specific needs that the M1s may not prioritize, such as faster engraving speeds or broader material ranges. Review the specifications to see which machine fits your workflow best.
Our top pick: Laservii M1s Infrared 2W Engraver.
Comparing the Top Alternatives
xTool M2 20W Enclosed Laser Engraver
The xTool M2 20W differs significantly by using a 20W blue diode laser instead of the Laservii M1s infrared source. This makes it better for wood, leather, and fabric rather than metals. It includes a camera for precise positioning, which the M1s lacks. The M2 is designed for DIY makers who need safety without metal marking. You lose the fine detail on stainless steel but gain versatility on organic materials. Choose this if you prioritize enclosed safety and camera aids for non-metal crafts over specialized metal engraving.
Creality Falcon2 Pro S 22W Desktop Laser
The Creality Falcon2 Pro S 22W offers 22W of diode power, far exceeding the M1s 2W infrared output. This allows for faster cutting of wood and acrylic, though it lacks the infrared capability for direct metal marking. It features auto-focus and air assist, which the M1s does not list. The workspace is larger, and the machine is heavier at 49.3 pounds. You gain speed and cutting depth but lose the specialized precision for metals. Pick this for batch production on non-metals where speed and enclosed safety are more important than metal marking.
Creality Falcon A1 Pro 20W Enclosed Engraver
The Creality Falcon A1 Pro 20W provides 20W of blue laser power, making it much stronger for cutting wood and acrylic than the M1s. It includes auto-focus, air assist, and a camera, features absent in the M1s. While it can mark metals with optional IR modules, it does not include them. The M1s is ready for metal out of the box. You trade specialized infrared precision for a versatile, high-speed diode system. This is the better choice if you need fast engraving on wood and leather and do not require immediate metal marking capability.
Longer B1 40W Laser Engraver
The Longer B1 40W laser delivers 40W of power, drastically outperforming the M1s 2W infrared source in cutting capacity. It is built for thick materials and large projects, whereas the M1s focuses on fine detail. The B1 includes air assist and a camera, enhancing speed and accuracy on wood and acrylic. You give up the compact, specialized metal-marking design for a high-power cutting machine. This alternative suits users who need to cut substantial thicknesses and prioritize raw power over the M1s specific infrared metal engraving strengths.
SCULPFUN E1 Pro 21W Enclosed Laser Engraver
The KoveYzao SCULPFUN E1 Pro 21W uses a 21W blue diode laser, offering significantly more cutting power than the M1s 2W infrared module. It is enclosed and designed for detailed work on wood and leather. The E1 Pro lacks the infrared capability for direct metal marking found in the M1s. You gain higher speed and power for organic materials but lose the ability to engrave metals without extra modules. This pick is ideal for hobbyists who value enclosed safety and fast engraving on non-metals over specialized metal marking precision.
Creality Falcon2 Pro S 22W Enclosed Laser
The Creality Falcon2 Pro S 22W enclosed laser provides 22W of diode power, far surpassing the M1s 2W infrared output. It features air assist and a camera for precise, fast engraving on wood and metal surfaces. Unlike the M1s, it relies on blue laser technology for most tasks. You gain automated focusing and higher speed for non-metals but lose the dedicated infrared precision for fine metal details. This model fits users who prioritize fast, safe indoor operation and versatile material handling over the specific metal-marking capabilities of the Laservii M1s.
Quick picks
Our 7 picks
Laservii M1s Infrared 2W Engraver
Best for: precision metal engraving and marking
- Laser Type
- Infrared
- Engraving Speed
- 36,000mm/min
- Software Compatibility
- LightBurn, LaserGRBL
- Form Factor
- Class 1 Enclosed
- Features
- Enclosure
- Dimensions
- 19 × 14.7 × 7.8 inches
View on Amazon: Laservii M1s Infrared 2W Engraver Affiliate link
The Laservii M1s IR2w is a fully enclosed laser engraver powered by a 1064nm infrared module with at least 2W of optical power. It features a 285 x 205 mm work area and reaches speeds up to 36,000 mm/min. This unit suits users who need to mark metals and opaque plastics. The compact design fits on most desks while containing dust and fumes. You get a safe, clean workspace for precision metal business cards or jewelry.
Pros
- 1064nm infrared laser for metal engraving
- Fully enclosed safety design
- High speed up to 36,000 mm/min
- Compatible with LightBurn and LaserGRBL
Cons
- Low 2W power limits cutting depth
- Small 285 x 205 mm work area
- Requires optional screen for TF card use
Good fit if
- You need to engrave stainless steel or titanium
- You want a safe enclosed workspace
- You prefer precise metal marking over deep cutting
Skip if
- You require high power for thick wood
- You need to cut large sheets
- You want a built-in display screen
Verdict: The Laservii M1s IR 2W Infrared is a specialized tool for precise metal marking. It fits makers who prioritize safety and fine detail on metals over high-speed cutting.
xTool M2 20W Enclosed Laser Engraver
Best for: DIY makers needing enclosed safety and cameras
- Laser Type
- Diode
- Laser Power
- 20W (20000mW)
- Software Compatibility
- xTool Studio
- Form Factor
- Fully enclosed Class 1
- Compatible Material
- Wood, Leather, Paper, Fabric
- Features
- Enclosure, Camera
View on Amazon: xTool M2 20W Enclosed Laser Engraver Affiliate link
The xTool M2 is a Class 1 enclosed laser engraver with a 20W diode laser. It features built-in dual cameras for real-time preview and precise positioning. The system uses xTool Studio software with customizable templates. It handles wood, leather, paper, and fabric. This setup suits DIY makers who want a safe, enclosed environment for home crafting without needing external ventilation.
Pros
- Class 1 enclosed safety design
- Built-in dual cameras for accuracy
- 20W diode laser output
- xTool Studio with AI templates
Cons
- CMYK inkjet module sold separately
- 3W IR laser module sold separately
- RA3 Lite rotary not included
Good fit if
- You need a fully enclosed Class 1 machine
- You want dual cameras for precise placement
- You engrave wood, leather, or paper at home
Skip if
- You require built-in full-color printing
- You need metal engraving without extra modules
- You prefer an open-frame desktop unit
Verdict: The xTool M2 20W Enclosed Laser is a safe, camera-equipped choice for DIY makers who prioritize enclosed safety and precise placement for non-metal materials.
Creality Falcon2 Pro S 22W Desktop Laser
Best for: enclosed professional batch production
- Laser Type
- Diode
- Laser Power
- 22W
- Engraving Speed
- 600mm/s (up to 500mm/s)
- Form Factor
- Fully enclosed
- Cutting Capacity
- 15mm basswood, 10mm black acrylic
- Compatible Material
- Wood, Acrylic
View on Amazon: Creality Falcon2 Pro S 22W Desktop Laser Affiliate link
The Creality Falcon2 Pro S 22W is a fully enclosed diode laser with 22W optical output. It reaches engraving speeds up to 600mm/s and cuts 15mm basswood or 10mm black acrylic. A built-in camera supports auto focus and one-key positioning. The Class 1 design includes flame detection and safety locks. You get a debris drawer and 80% pre-assembly for quick setup in small studios.
Pros
- 22W optical output for thick material cutting
- Built-in camera with intelligent auto focus
- Fully enclosed Class 1 safety design
- Engraving speeds up to 600mm/s
Cons
- Heavier build at 49.3 pounds
- Smaller working area than 40W alternatives
- No mention of wireless connectivity
Good fit if
- You need a Class 1 enclosed unit for indoor use
- You require fast batch processing speeds
- You want auto focus without manual adjustment
Skip if
- You need to cut materials thicker than 15mm
- You require a larger workspace for big projects
- You prefer a lighter desktop machine
Verdict: The Creality Falcon2 Pro S 22W offers strong cutting power and safety features for small studios. It suits makers who prioritize enclosed operation and speed over maximum workspace size.
Creality Falcon A1 Pro 20W Enclosed Engraver
Best for: Safe, fast blue laser engraving
- Laser Power
- 20W
- Engraving Speed
- 600mm/s
- Software Compatibility
- Creality Falcon Design Space
- Form Factor
- Class 1 Safety Enclosed
- Cutting Capacity
- 10mm wood board or 13mm acrylic board
- Compatible Material
- Wood, Metal, Acrylic
View on Amazon: Creality Falcon A1 Pro 20W Enclosed Engraver Affiliate link
This enclosed Class 1 laser engraver features a 20W blue module and an optional 2W IR module. It reaches engraving speeds of 600mm/s and cuts up to 10mm wood or 13mm acrylic. The unit includes air assist, an HD camera with auto-focus, and a smart touchscreen. It runs on Creality Falcon Design Space or LightBurn software. This model suits users needing precise, fast work in a safe, enclosed environment.
Pros
- 20W blue laser module for fast cutting
- Optional 2W IR module for fine detail
- HD camera with 3-second auto-focus
- Class 1 enclosed safety design
- Supports LightBurn software
Cons
- IR module is optional and not included
- Exhaust requires outdoor connection or purifier
- Heavier build at 37 pounds
Good fit if
- You need a safe, enclosed workspace
- You want fast engraving speeds
- You prefer touchscreen control
Skip if
- You already have an IR module
- You cannot vent smoke outdoors
- You need included infrared capability
Verdict: Creality Falcon A1 Pro 20W offers a safe, enclosed design with fast 20W blue laser cutting and optional IR precision. It fits users who value safety and speed over included infrared hardware.
Longer B1 40W Laser Engraver
Best for: Thick material cutting and large projects
- Laser Power
- 40W (up to 48W)
- Working Area
- 450 x 440 mm
- Engraving Speed
- 36,000 mm/min
- Cutting Capacity
- 40 mm basswood, 50 mm acrylic
- Features
- Enclosure, Air Assist, Camera
View on Amazon: Longer B1 40W Laser Engraver Affiliate link
The Longer B1 40W is an enclosed laser engraver with a 450 x 440 mm working area. It delivers up to 48W of output power, enabling cuts through 40 mm basswood and 50 mm acrylic. The machine reaches speeds of 36,000 mm/min and includes a camera kit for real-time monitoring. This setup suits users who need high power and a large workspace for thick materials.
Pros
- 40W laser output with up to 48W peak power
- Large 450 x 440 mm working area
- 36,000 mm/min engraving speed
- Includes camera kit for visual feedback
- Air assist and effective ventilation system
Cons
- Heavier iron and aluminum honeycomb table may limit portability
- No mention of app or remote control support
- No Bluetooth connectivity listed
Good fit if
- You need to cut thick materials like 40 mm basswood
- You require a large workspace for big projects
- You want real-time visual monitoring via camera
Skip if
- You only engrave thin materials under 5 mm
- You need a compact desktop unit with no enclosure
- You require wireless app control for operation
Verdict: Longer B1 40W Laser Engraver fits users who need high power and a large workspace for thick materials. It is ideal for serious hobbyists or small businesses handling substantial cutting tasks.
SCULPFUN E1 Pro 21W Enclosed Laser Engraver
Best for: detailed engraving on wood and leather
- Laser Type
- Diode (455nm)
- Laser Power
- 21000mW
- Working Area
- 400×320mm
- Engraving Speed
- up to 600mm/s
- Software Compatibility
- SCULPFUN Space, LightBurn, LaserGRBL
- Form Factor
- Fully enclosed (Class 1)
View on Amazon: SCULPFUN E1 Pro 21W Enclosed Laser Engraver Affiliate link
The KoveYzao SCULPFUN E1 Pro is a Class 1 enclosed diode laser engraver with a 21000mW output. It features a 400x320mm working area and speeds up to 600mm/s using a CoreXY motion system. The unit includes a built-in camera, air assist, and WiFi app control. It suits users who need a safe, pre-assembled desktop machine for wood, leather, and acrylic projects.
Pros
- 21000mW diode laser power for clean engraving
- Class 1 fully enclosed design with safety features
- CoreXY system supports 600mm/s engraving speed
- Built-in HD camera for visual alignment
- Supports LightBurn and SCULPFUN Space software
Cons
- Heavier build at 26.6 pounds
- Smaller working area than 40W competitors
- Requires blackening for reflective materials
Good fit if
- You want a pre-assembled, enclosed safety design
- You need precise engraving on small to medium items
- You prefer app-based WiFi control
Skip if
- You require infrared laser capabilities out of the box
- You need to cut thick or large panels
- You prioritize maximum cutting speed over enclosure safety
Verdict: The KoveYzao SCULPFUN E1 Pro 21W is a safe, high-speed option for detailed work on smaller materials. It fits hobbyists who value enclosed safety and smart features over raw cutting power.
Creality Falcon2 Pro S 22W Enclosed Laser
Best for: Fast engraving and safe indoor use
- Laser Power
- 22W
- Engraving Speed
- 25,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn
- Form Factor
- Enclosed (Class 1)
- Cutting Capacity
- 15 mm basswood, 10 mm acrylic
- Compatible Material
- Wood, Metal
View on Amazon: Creality Falcon2 Pro S 22W Enclosed Laser Affiliate link
The Creality Falcon2 Pro S 22W is a Class 1 enclosed laser engraver with 22,000 mW power. It reaches engraving speeds up to 25,000 mm/min and cuts 15 mm basswood or 10 mm black acrylic. A built-in camera aids positioning, while smart auto-focus adjusts height instantly. You get a quiet, enclosed workspace with air assist. This machine suits users who need reliable speed and safety without manual focusing.
Pros
- 22,000 mW laser output for cutting 15mm basswood
- Engraving speeds up to 25,000 mm/min
- Built-in top camera for visual alignment
- Smart auto-focus for instant height adjustment
- Class 1 enclosed design with air assist
Cons
- 22W power is lower than the 40W Longer B1
- Smaller working area compared to larger desktop cutters
- No mention of wireless connectivity in specifications
Good fit if
- You want a Class 1 enclosed machine for safe indoor use
- You need fast engraving speeds for batch processing
- You require auto-focus to save setup time
Skip if
- You need to cut thick materials beyond 15mm wood
- You prefer a larger bed for big projects
- You want higher power than 22W for faster cutting
Verdict: The Creality Falcon2 Pro S 22W delivers strong 22W power and high speed in a safe, enclosed design. It fits users who prioritize fast engraving and automated focusing over raw cutting thickness.
Specifications side by side
| Spec | Laservii M1s Infrared 2W Engraver | xTool M2 20W Enclosed Laser Engraver | Creality Falcon2 Pro S 22W Desktop Laser | Creality Falcon A1 Pro 20W Enclosed Engraver | Longer B1 40W Laser Engraver | SCULPFUN E1 Pro 21W Enclosed Laser Engraver | Creality Falcon2 Pro S 22W Enclosed Laser |
|---|---|---|---|---|---|---|---|
| Laser Type | Infrared | Diode | Diode | not stated | not stated | Diode (455nm) | not stated |
| Laser Power | not stated | 20W (20000mW) | 22W | 20W | 40W (up to 48W) | 21000mW | 22W |
| Working Area | not stated | not stated | not stated | not stated | 450 x 440 mm | 400×320mm | not stated |
| Engraving Speed | 36,000mm/min | not stated | 600mm/s (up to 500mm/s) | 600mm/s | 36,000 mm/min | up to 600mm/s | 25,000 mm/min |
| Software Compatibility | LightBurn, LaserGRBL | xTool Studio | not stated | Creality Falcon Design Space | not stated | SCULPFUN Space, LightBurn, LaserGRBL | LaserGRBL, LightBurn |
| Form Factor | Class 1 Enclosed | Fully enclosed Class 1 | Fully enclosed | Class 1 Safety Enclosed | not stated | Fully enclosed (Class 1) | Enclosed (Class 1) |
| Cutting Capacity | not stated | not stated | 15mm basswood, 10mm black acrylic | 10mm wood board or 13mm acrylic board | 40 mm basswood, 50 mm acrylic | not stated | 15 mm basswood, 10 mm acrylic |
| Compatible Material | not stated | Wood, Leather, Paper, Fabric | Wood, Acrylic | Wood, Metal, Acrylic | not stated | not stated | Wood, Metal |
| Features | Enclosure | Enclosure, Camera | Enclosure, Air Assist, Camera, Auto Focus | Enclosure, Air Assist, Camera, Auto Focus | Enclosure, Air Assist, Camera | Enclosure | Enclosure, Air Assist, Camera |
| Target Audience | not stated | DIY | not stated | not stated | not stated | not stated | not stated |
| Size | not stated | 20W | Falcon2 Pro-22W with Integrated Enclosure | 22.3*18.4*8.3 inch | 40W | not stated | not stated |
| Dimensions | 19 × 14.7 × 7.8 inches | not stated | 26 × 22 × 12.9 inches | 5 × 3 × 1 inches | not stated | 23.2 × 19.7 × 8.07 inches | 25.4 × 11.2 × 30.3 inches |
| Weight | 15.8 pounds | not stated | 49.3 pounds | 37 pounds | not stated | 26.6 pounds | not stated |
| Color | M1s-Infrared 2W | M2 Basic | Falcon2 Pro S 22W | A1 Pro-20W-White | Camera Set | E1 Pro-21W | Falcon2 Pro S 22W |
| Model | M1s IR-Laser | MLM-K610-001 | Falcon2 pro 22W | Creality Falcon A1 PRO | B1 40W | E1 | Creality Falcon2 Pro 22W |
Looking beyond this list? See healix infrared sauna alternatives.
Frequently asked questions
Which alternative offers the highest laser power for thick materials?
The Longer B1 40W Laser Engraver provides 40W of power, which is double the Laservii M1s IR2w. This higher wattage allows you to cut through thicker materials more effectively. It also includes an enclosure, air assist, and camera for safer, more precise operation on large projects.
What is the best enclosed option for DIY makers?
The xTool M2 20W Enclosed Laser Engraver is designed specifically for DIY users who prioritize safety. It features a built-in camera for precise placement and an enclosure to contain fumes and light. It works well with wood, leather, paper, and fabric, making it versatile for hobbyists.
Which machine includes auto-focus and air assist features?
Both the Creality Falcon2 Pro S 22W and the Creality Falcon A1 Pro 20W include auto-focus and air assist. These features help maintain focus accuracy and clear debris during engraving. The Falcon A1 Pro also supports metal marking with optional infrared hardware, adding versatility to its capabilities.
How does the Creality Falcon2 Pro S compare in size?
The Creality Falcon2 Pro S 22W measures 22 inches wide, 12.9 inches high, and 26 inches long. It weighs 49.3 pounds, making it a substantial desktop unit. This size accommodates a larger work area while maintaining an enclosed design for safe indoor use during batch production tasks.
Which alternative is best for detailed wood and leather engraving?
The KoveYzao SCULPFUN E1 Pro 21W is ideal for detailed work on wood and leather. It offers a 21W laser source and an enclosed design for safety. Its dimensions are 19.7 inches wide and 23.2 inches long, providing a compact footprint while delivering high-speed engraving for smaller materials.
Does any alternative match the Laservii M1s metal engraving capability?
The Creality Falcon A1 Pro 20W supports metal engraving with optional infrared hardware. While the Laservii M1s includes infrared by default, this Creality model offers fast blue laser cutting and safe enclosed operation. It is suitable if you value speed and safety over included infrared precision.