Longer Laser Engraver Ray5 10W or Longer Upgrade RAY5 Laser Engraver? Which Longer Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the longer laser engraver ray5 10w vs upgrade ray5 laser engraver. Both machines share a 3.5-inch touch screen and support offline operation via USB, TF card, or WiFi. They also use the same 240MHz ESP32 chipset for faster processing. The main difference lies in the laser power and working area. One model offers higher power for thicker materials, while the other provides a slightly different footprint and precision specs.
Key differences
| Aspect | Longer Ray5 5W Laser Engraver | Longer Ray5 10W Laser Engraver with Touchscreen |
|---|---|---|
| Laser Power | 5W | 10W |
| Working Area | 15.75" x 15.75" | 400x400mm |
| Laser Spot Size | 0.08*0.08mm | 0.06mm*0.06mm |
| Max Engraving Speed | 24000mm/min | 10,000mm/min |
| Cutting Capacity | not listed | 0.8" wood, 1.2" acrylic |
Which one should you choose?
Choose Longer Ray5 5W Laser Engraver if
- You prefer a higher maximum engraving speed of 24000mm/min for faster detailed work.
- You want a smaller laser spot size of 0.08*0.08mm for fine precision.
- You need a working area of 15.75" x 15.75" that fits specific project dimensions.
Choose Longer Ray5 10W Laser Engraver with Touchscreen if
- You require 10W laser power to cut thicker materials like 0.8-inch wood or 1.2-inch acrylic.
- You want the finest laser spot size of 0.06mm*0.06mm for maximum detail.
- You need dual-beam technology to control multiple machines simultaneously.
Verdict: Choose the 5W model if your priority is speed and fine precision on thinner materials. Pick the 10W model if you need to cut through thicker wood or acrylic. Both offer similar connectivity and safety features for DIY users.
Longer Ray5 10W vs 5W Comparison
laser power
The Longer Upgrade Ray5 Laser Engraver features a 5W laser module. This output is sufficient for detailed engraving on softer materials and thin woods. The Longer Laser Engraver Ray5 10W doubles that power with a 10W output. This higher wattage allows for deeper and faster cutting through thicker materials. You get significantly more cutting capability with the 10W model. If you need to cut thicker acrylic or dense wood, the extra power is essential. The 5W model is better suited for surface engraving tasks where depth is not the primary goal.
working area
Both machines offer a generous workspace for your projects. The Longer Upgrade Ray5 Laser Engraver provides a working area of 15.75 inches by 15.75 inches. The Longer Laser Engraver Ray5 10W offers a 400mm by 400mm area, which converts to approximately 15.75 inches by 15.75 inches. The dimensions are effectively identical in practical use. You will have the same amount of space to position your materials on either machine. Neither model offers a larger or smaller platform than the other. The choice between them will not be influenced by the size of the working bed.
engraving precision
Precision matters for fine details in your work. The Longer Upgrade Ray5 Laser Engraver uses a laser spot size of 0.08mm by 0.08mm. It achieves an engraving accuracy of 0.01mm. The Longer Laser Engraver Ray5 10W utilizes dual-beam technology to create a smaller spot of 0.06mm by 0.06mm. It also maintains the same 0.01mm accuracy. The smaller spot size on the 10W model allows for sharper lines and finer details. You will notice a clearer result on intricate designs with the higher-end model. Both machines offer high precision, but the 10W has a slight edge in spot size.
cutting capacity
Cutting thickness is a key differentiator. The data for the Longer Upgrade Ray5 Laser Engraver does not specify maximum cutting thickness. The Longer Laser Engraver Ray5 10W can cut wood up to 0.8 inches thick and acrylic up to 1.2 inches thick. This substantial cutting capacity is enabled by its 10W power. You can tackle thicker materials with the 10W model. The 5W model likely handles thinner materials well, but specific limits are not provided. If you plan to cut substantial thicknesses, the 10W model is the clear choice for its documented capabilities.
max speed
Speed affects how quickly you complete jobs. The Longer Upgrade Ray5 Laser Engraver lists a processing speed of up to 24,000mm/min. The Longer Laser Engraver Ray5 10W lists a maximum engraving speed of 10,000mm/min. The 5W model advertises a faster speed figure. However, speed often trades off with power and precision. The 10W model may take longer but delivers more power. You might prefer the faster travel of the 5W for simple engraving. The 10W prioritizes cutting power over raw travel speed. Both are fast enough for hobbyist use.
software compatibility
Both machines support the same software ecosystem. The Longer Upgrade Ray5 Laser Engraver works with LaserGRBL and LightBurn. The Longer Laser Engraver Ray5 10W also supports LaserGRBL and LightBurn. You can use your preferred software on either device without issues. Both also support offline operation via USB, TF card, or WiFi. The connection methods are identical. You have the same flexibility to control the machine online or offline. There is no difference in software support between the two models. This is a tie for users who rely on specific engraving software.
safety features
Safety is important for any laser user. Both machines include a protective cover and safety goggles. They both feature motion protection that shuts down the machine during abnormal shaking. The Longer Upgrade Ray5 Laser Engraver includes thermal protection. The Longer Laser Engraver Ray5 10W adds an emergency stop function and a hidden active cooling system. The active cooling helps extend the laser lifespan. The emergency stop provides an extra layer of control. The 10W model offers slightly more comprehensive safety and maintenance features. Both are well-equipped for safe operation.
Which Longer Ray5 model suits you
Users needing deep cuts on thick materials
The 10W model delivers higher power for cutting wood up to 0.8 inches and acrylic up to 1.2 inches. Its dual-beam technology creates a finer 0.06mm laser spot for precise details. You get faster speeds up to 10,000mm/min and a hidden cooling system to protect the laser module during heavy use.
Budget buyers focusing on detailed engraving
The 5W version offers a 0.08mm laser spot size for high-precision engraving on softer surfaces. It reaches speeds of 24,000mm/min for quick jobs on thin materials. This model is ideal if you prioritize intricate surface designs over deep cutting capabilities, providing reliable performance for lighter daily tasks.
Those valuing safety and ease of use
Both models include safety covers and glasses, but the 5W unit explicitly highlights thermal protection that stops the machine if it detects flame overheating. It also features motion protection to shut down during abnormal shaking. These safety features ensure peace of mind while you operate the machine for your projects.
The products compared
Longer Ray5 5W Laser Engraver
Best for: Detailed engraving on a 15.75" x 15.75" area
- Laser Power
- 5W
- Working Area
- 15.75" x 15.75"
- Engraving Speed
- 24,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn
- Compatible Material
- Wood, Acrylic, Leather
- Target Audience
- DIY
View on Amazon: Longer Ray5 5W Laser Engraver Affiliate link
The Longer Ray5 offers a 15.75" x 15.75" working area with a 5W laser module. It features a 3.5-inch color touch screen and an ESP32 chipset for faster processing. The machine supports USB, TF card, WiFi, and app connections. It includes safety protections like thermal and motion sensors. This model suits users who want precise engraving with a 0.01mm accuracy and offline operation capabilities.
Pros
- 3.5-inch intelligent color touch screen for direct control
- ESP32 chipset for faster performance than 8-bit machines
- Supports USB, TF card, WiFi, and app connections
- Includes thermal and motion protection safety features
Cons
- 5W laser power limits cutting thickness on dense materials
- No built-in air assist pump mentioned in specifications
- Requires assembly before first use
Good fit if
- You need a larger 15.75" x 15.75" working area
- You prefer controlling settings via a color touch screen
- You want offline operation using TF card or WiFi
Skip if
- You require a 10W laser for thicker material cutting
- You need a machine that arrives fully assembled
- You prefer a smaller footprint under 15 inches
Verdict: Longer Ray5 15.75" Laser Engraver fits users who prioritize a larger working area and touch screen control over raw cutting power. It is a solid choice for detailed engraving on thin materials.
Longer Ray5 10W Laser Engraver with Touchscreen
Best for: precise engraving on smaller workpieces
- Laser Power
- 10W
- Working Area
- 400x400mm
- Engraving Speed
- 10,000mm/min
- Software Compatibility
- LaserGRBL, LightBurn
- Cutting Capacity
- 0.8" (20mm) wood, 1.2" (30mm) acrylic
- Compatible Material
- Wood, Metal, Acrylic, Glass
View on Amazon: Longer Ray5 10W Laser Engraver with Touchscreen Affiliate link
The Longer Ray5 10W is a DIY laser engraver with a 400x400mm working area. It features a 10W laser module and dual-beam technology for a 0.06mm spot size. The machine reaches speeds of 10,000mm/min and cuts wood up to 0.8 inches thick. It includes a 3.5-inch touch screen and supports WiFi, USB, and app control. This model suits users needing precise engraving on various materials.
Pros
- 10W laser output for cutting wood up to 0.8 inches
- 0.06mm ultra-fine laser point for high precision
- 400x400mm spacious working area
- Dual-beam technology enables 10,000mm/min engraving speed
- Supports LaserGRBL and LightBurn software
Cons
- Smaller working area than the upgrade model
- Lower cutting capacity for wood than higher wattage options
- Requires assembly upon delivery
Good fit if
- You need a compact 400x400mm workspace
- You want precise 0.06mm engraving detail
- You prefer control via app or WiFi
Skip if
- You require a larger working area than 400x400mm
- You need to cut wood thicker than 0.8 inches
- You want the maximum cutting power available
Verdict: The Longer Ray5 10W Laser Engraver fits users who prioritize precision and software flexibility over raw cutting depth. It is ideal for detailed work on smaller projects.
Specifications side by side
| Spec | Longer Ray5 5W Laser Engraver | Longer Ray5 10W Laser Engraver with Touchscreen |
|---|---|---|
| Laser Power | 5W | 10W |
| Working Area | 15.75" x 15.75" | 400x400mm |
| Engraving Speed | 24,000 mm/min | 10,000mm/min |
| Software Compatibility | LaserGRBL, LightBurn | LaserGRBL, LightBurn |
| Cutting Capacity | not stated | 0.8" (20mm) wood, 1.2" (30mm) acrylic |
| Compatible Material | Wood, Acrylic, Leather | Wood, Metal, Acrylic, Glass |
| Features | not stated | Touchscreen |
| Target Audience | DIY | DIY |
| Size | 15.75"x15.75" | 10W |
| Dimensions | 24 × 26.4 × 7.87 inches | 25.4 × 17.1 × 12.8 inches |
| Color | Black | 10w |
| Model | Ray5 | 10W |
Frequently asked questions
What is the working area size of the Longer Ray5 5W model?
The Longer Ray5 5W Laser Engraver offers a 15.75 by 15.75-inch working area. This larger surface allows you to handle bigger projects compared to smaller desktop units. The machine itself measures 26.4 inches in width, 24 inches in length, and 7.87 inches in height. It is designed for detailed engraving on a substantial footprint.
Does the 10W Ray5 model have a touchscreen?
Yes, the Longer Ray5 10W Laser Engraver includes a touchscreen interface. This feature allows you to control settings directly on the device without needing a computer connection. The unit supports offline operation via USB, TF card, or WiFi. It is suitable for DIY users who want precise control over smaller workpieces.
What materials can the 10W Ray5 engrave?
The Longer Ray5 10W Laser Engraver is compatible with wood, metal, acrylic, and glass. Its 10W laser power enables it to cut wood up to 0.8 inches thick and acrylic up to 1.2 inches thick. The dual-beam technology creates a fine 0.06mm spot for precise details on these various materials.
How does the processing speed compare between the models?
Both the 5W and 10W Longer Ray5 models use the same 240MHz ESP32 chipset. This processor ensures faster data processing for both machines. You get consistent performance regardless of the laser power you choose. The hardware handles file loading and engraving commands efficiently for both detailed and cutting tasks.
Which model is better for thick material cutting?
The Longer Ray5 10W Laser Engraver is better for thick materials. It delivers 10W of power, which is double the output of the 5W model. This extra power allows for deeper cuts in wood and acrylic. If you need to process thicker sheets, the 10W unit provides the necessary capability.
What are the physical dimensions of the 10W Ray5?
The Longer Ray5 10W Laser Engraver measures 17.1 inches in width, 25.4 inches in length, and 12.8 inches in height. These dimensions make it a compact unit for desktop use. It is smaller than the 5W model in width but slightly taller and longer in overall footprint.