15 Best Longer 10W Laser Engravers, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best longer 10W laser engravers comes down to matching work area dimensions and bundled hardware to your typical projects. We evaluated 15 models based strictly on the specifications published on their listings.
The Longer Ray5 10W Laser Engraver leads the list because it pairs a standard 400 × 400 mm workspace and speeds up to 24,000 mm/min with a built-in 3.5-inch touchscreen for offline operation. This guide helps you decide between standard open frames, compact enclosures, and extended work beds for your workspace.
Quick picks
The best fit for you
- You need a standard work area with standalone touchscreen control Longer Ray5 10W Laser Engraver It offers a standard 400 × 400 mm workspace paired with an integrated 3.5-inch touchscreen for standalone offline operation.
- You want an enclosed design for tight desk workspaces Longer Ray5 MiniS 10W Laser Engraver Its compact 12.6 × 12.6-inch footprint and 131 × 125 mm working area fit restricted bench spaces directly.
- You want clean cuts and cylindrical engraving out of the box Longer RAY5 10W with Air Assist & Rotary This package includes air assist and a rotary attachment for processing curved objects and clearing debris on its 400 × 401 mm bed.
- You need extra workspace length for oversized cutting projects Longer RAY5 10W Extended Engraver The extended frame expands your cutting boundaries to an elongated 400 × 850 mm working area.
Our 15 picks
Longer Ray5 10W Laser Engraver
Best for: general-purpose 10W engraving with offline touchscreen control
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400 x 400 mm
- Engraving Speed
- Up to 24,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn
- Dimensions
- 24.5 × 12 × 5 inches
The Longer Ray5 10W Laser Engraver provides a 400 by 400 mm working area powered by a 10W dual-beam laser. You get engraving speeds up to 24,000 mm/min, driven by a 240MHz ESP32 processor, alongside a 0.06 by 0.06 mm laser spot. With a built-in 3.5-inch touchscreen, Wi-Fi, and TF card support, it suits makers and small workshops needing standalone offline operation and broad compatibility with LightBurn and LaserGRBL.
Pros
- Engraving speeds reaching up to 24,000 mm/min
- Fine 0.06 × 0.06 mm laser spot with 0.01 mm engraving accuracy
- 3.5-inch touchscreen for standalone offline operation
- Multiple connectivity options including Wi-Fi, USB, and TF card
Cons
- Requires manual assembly using the included tool set
- Does not come with an included air assist pump
- Open-frame construction lacks an integrated protective enclosure
Good fit if
- You want offline control via a 3.5-inch touchscreen, Wi-Fi, or TF card without tethering a PC.
- You need a standard 400 × 400 mm work area for materials like wood, leather, and acrylic.
- You plan to manage multiple machines using an ESP32 multi-core setup.
Skip if
- You need a fully enclosed engraver instead of an open frame.
- You want a machine that comes with an air pump in the box.
- You prefer a fully pre-assembled unit ready to use immediately.
Verdict: Longer Ray5 10W Laser Engraver balances a spacious 400 × 400 mm workspace with fast speeds up to 24,000 mm/min. Its 3.5-inch touchscreen and offline connectivity make it a versatile choice for standard 10W engraving and cutting tasks.
Longer Ray5 10W Laser Engraver with Touchscreen
Best for: makers wanting standalone offline touchscreen operation
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400x400mm
- Engraving Speed
- 10,000mm/min
- Software Compatibility
- LaserGRBL, LightBurn
- Cutting Capacity
- 0.8" (20mm) wood, 1.2" (30mm) acrylic
- Compatible Material
- Wood, Metal, Acrylic, Glass
View on Amazon: Longer Ray5 10W Laser Engraver with Touchscreen
This 10W diode engraver provides a 400x400mm working area paired with a built-in 3.5-inch touchscreen. It runs on a 240MHz ESP32 chipset and reaches engraving speeds up to 10,000mm/min. With a fine 0.06x0.06mm focal spot, it handles detailed etching as well as cutting wood up to 20mm thick. It suits makers who want flexible offline control options without needing a dedicated computer tethered via USB at all times.
Pros
- Built-in 3.5-inch touchscreen for standalone operation
- Spacious 400x400mm working area with 10,000mm/min speed
- Fine 0.06x0.06mm laser spot with dual-beam technology
- Multiple connectivity methods including WiFi, TF card, USB, and App
- Integrated motion protection, heat shutoff, and emergency stop
Cons
- Air assist pump is not included in the standard package
- Open-frame construction requires proper external ventilation and room precautions
Good fit if
- You prefer running jobs offline using a touchscreen, TF card, or mobile app
- You need a standard 400x400mm work bed for medium-sized wood or acrylic projects
- You want safety features such as abnormal motion detection and an emergency stop switch
Skip if
- You need a fully enclosed desktop engraver for indoor living spaces
- You require an included air assist pump directly out of the box
Verdict: Longer Ray5 10W with Touchscreen gives you reliable 10W cutting capability and standalone screen control on a full-size 400x400mm platform.
Longer Ray5 MiniS 10W Laser Engraver
Best for: small-scale engraving on tight desk spaces
- Laser Power
- 10W (what this guide is about)
- Working Area
- 131 × 125 mm
- Engraving Speed
- 12,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn, LaserBurn
- Cutting Capacity
- 5 mm basswood, 3 mm acrylic
- Dimensions
- 12.6 × 12.6 × 7.87 inches
The Longer Ray5 MiniS is a compact desktop laser engraver built with an enclosed aluminum frame. It pairs a 10W optical output with a 131 by 125 mm working area and an engraving speed reaching 12,000 mm/min. Built-in safety features include a door sensor and an acrylic protective cover. It suits you if you need a desktop-sized machine for small-batch engraving and cutting without dedicating substantial workshop space.
Pros
- Compact 12.6 by 12.6-inch footprint with a mostly pre-assembled aluminum frame
- Class 1 protective acrylic cover with an automatic pause door sensor
- Fast maximum engraving speed of up to 12,000 mm/min
- Wi-Fi connectivity supporting LaserGRBL, LightBurn, and mobile apps
Cons
- Small 131 by 125 mm working area restricts overall project dimensions
- Single-pass cutting is limited to 5 mm basswood or 3 mm acrylic
Good fit if
- You need a compact desktop machine with a 131 by 125 mm work area.
- You want an enclosed design featuring a door sensor and acrylic eye protection.
- You prefer sending projects wirelessly via built-in Wi-Fi.
Skip if
- You regularly work on projects larger than 131 by 125 mm.
- You need to cut materials thicker than 5 mm in a single pass.
Verdict: Longer Ray5 MiniS 10W Compact Laser Engraver delivers 10W cutting and engraving power inside a pre-assembled, protective enclosure. It is an effective option when you require precise, small-format work in a compact footprint.
Longer Ray5 miniS 10W Enclosed Laser Engraver
Best for: compact desk workspaces and small-item engraving
- Laser Power
- 10W (what this guide is about)
- Laser Type
- Diode
- Working Area
- 125 x 130 mm
- Engraving Speed
- Up to 12,000 mm/min
- Software Compatibility
- LightBurn, LaserGRBL, Mobile App
- Form Factor
- Fully enclosed (Class 1)
View on Amazon: Longer Ray5 miniS 10W Enclosed Laser Engraver
The Longer Ray5 miniS is a compact 10W diode laser engraver built into a fully enclosed, Class 1 safety enclosure. It offers a 125 x 130 mm working area, a 0.06 x 0.06 mm laser spot, and travel speeds up to 12,000 mm/min. If you work in a tight craft room, dorm, or classroom where built-in filtration and safety interlocks matter, this desktop model fits without open-frame risks.
Pros
- Class 1 fully enclosed design with lid safety interlock
- Fine 0.06 x 0.06 mm laser spot with 0.01 mm repeat accuracy
- Engraving speeds reaching up to 12,000 mm/min
- Pre-assembled compact frame measuring 12.6 x 12.1 x 7.87 inches
- Supports Wi-Fi, USB, mobile app, and offline microSD operation
Cons
- Small 125 x 130 mm working area limits project dimensions
- Accessories like air assist and honeycomb bed must be added separately
Good fit if
- You need a Class 1 enclosed machine for a home desk, studio, or classroom
- You focus on smaller projects like jewelry, small signs, and personalized gifts
- You want offline engraving options using Wi-Fi, microSD, or a mobile app
Skip if
- You need to cut or engrave large workpieces beyond 125 x 130 mm
- You prefer an open-frame platform with a large standard work area
Verdict: Longer Ray5 miniS 10W Enclosed Laser Engraver provides a secure, fully enclosed Class 1 footprint for detailed small-scale engraving. It trades bed size for desk-friendly safety and immediate pre-assembled setup.
Longer Ray5 10W Laser Engraver
Best for: standalone offline engraving on a standard bed
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400x400mm
- Engraving Speed
- 10,000mm/min
- Software Compatibility
- LaserGRBL, LightBurn
- Cutting Capacity
- 0.8"/20mm wood, 1.2"/30mm acrylic
- Compatible Material
- Wood, Metal, Acrylic, Glass
The Longer Ray5 10W Laser Engraver is a diode laser machine built for DIY engraving and cutting tasks. It provides a standard 400x400mm work area, a fine 0.06x0.06mm laser focal spot, and speeds reaching up to 10,000mm/min. With an integrated 3.5-inch touchscreen, it allows you to run jobs offline via TF card or Wi-Fi. It suits makers seeking dependable core specs and standalone operation.
Pros
- Integrated 3.5-inch touchscreen for offline control
- Fine 0.06 x 0.06 mm laser spot with 0.01 mm motion precision
- 400 x 400 mm working area for standard project sizes
- Multiple inputs including Wi-Fi, TF card, USB, and mobile app
- Built-in safety sensors for tilt, motion, and heat detection
Cons
- Top engraving speed is capped at 10,000 mm/min
- Air assist pump and honeycomb plate are not included
- Open-frame structure lacks a built-in protective enclosure
Good fit if
- You want to operate your engraver offline using a built-in touchscreen.
- You need a standard 400 x 400 mm workspace for cutting wood and acrylic.
- You prefer multiple connection choices such as Wi-Fi, TF card, and USB.
Skip if
- You require an enclosed laser machine for built-in fume containment.
- You want an all-in-one package that includes an air assist pump.
Verdict: Longer Ray5 10W Laser Engraver balances solid 10W diode power with an accessible 3.5-inch touchscreen interface. It handles standard 400x400mm projects capably without requiring a tethered computer.
Longer RAY5 10W with Air Assist & Rotary
Best for: clean cutting with rotary and air assist
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400×400mm
- Engraving Speed
- Up to 10,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn
- Cutting Capacity
- 20mm solid wood, 30mm acrylic
- Compatible Material
- Wood, Acrylic, Leather
This Longer RAY5 bundle pairs a 10W diode laser with a dedicated 10 to 30 L/min adjustable air pump. You get a 400×400mm work bed, engraving speeds up to 10,000 mm/min, and standalone control via a 3.5-inch color touchscreen. With an included rotary roller and eight riser feet, it suits makers who want clean cut edges on flat stock and cylindrical items right out of the box.
Pros
- Includes an adjustable 10–30 L/min air pump rated at 60 dB
- Comes bundled with a 3-in-1 rotary roller and 8 riser stands
- Standard 400×400mm work area with speeds up to 10,000 mm/min
- Standalone 3.5-inch color touchscreen with Wi-Fi, TF card, and app control
Cons
- Requires manual assembly before first use
- Engraving speed tops out at 10,000 mm/min
Good fit if
- You need an included air pump to clear smoke and reduce edge charring
- You plan to engrave cylindrical items like tumblers and bottles
- You prefer running jobs offline using an onboard touchscreen
Skip if
- You only engrave flat sheets and do not need extra rotary accessories
- You need engraving speeds higher than 10,000 mm/min
Verdict: Longer RAY5 10W with Air Assist & Rotary delivers a complete package focused on cleaner cuts and round objects. Its quiet, variable-flow pump makes it a practical choice if you want to minimize burn marks without buying add-ons separately.
Longer Ray5 10W Laser Engraver Bundle
Best for: tumblers, cylindrical objects, and accessory-heavy setups
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400 × 400 mm
- Engraving Speed
- 24,000 mm/min
- Software Compatibility
- LaserGRBL, LightBurn, LaserBurn
- Dimensions
- 24.4 × 11.8 × 10.1 inches
The Longer Ray5 10W Laser Engraver Bundle pairs a 10W dual-beam laser with an included 4-in-1 rotary attachment, an adjustable air assist kit, and 12 stackable risers. It provides a 400 × 400 mm working area and reaches speeds up to 24,000 mm/min with a 0.06 × 0.06 mm spot. If you plan to engrave tumblers, mugs, or tall stock right away, this kit includes the hardware up front.
Pros
- Engraving speeds reach up to 24,000 mm/min via a 240MHz ESP32 processor
- Includes a 4-in-1 rotary attachment, 10–30 L/min air assist kit, and 12 risers
- Fine 0.06 × 0.06 mm laser spot with 0.01 mm engraving accuracy
- Supports Wi-Fi, mobile app, USB, and TF card offline control
Cons
- Open-frame construction lacks a built-in protective enclosure
- Requires manual configuration and assembly for the rotary and riser add-ons
Good fit if
- You want bundled add-ons like a rotary tool, air assist, and risers in one package.
- You plan to engrave cylindrical items such as tumblers, mugs, and rings.
- You need higher engraving speeds up to 24,000 mm/min.
Skip if
- You only work on flat sheets and do not need rotary accessories or risers.
- You require a fully enclosed workspace out of the box.
Verdict: Longer Ray5 10W Laser Engraver Bundle expands your 400 × 400 mm workspace with essential hardware upgrades for cylindrical and air-assisted cutting projects.
Longer RAY5 10W Extended Engraver
Best for: oversized projects requiring extended Y-axis length
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400 x 850 mm (15.7" x 33.5")
- Engraving Speed
- 10,000 mm/min
- Compatible Material
- Silver
- Dimensions
- 24 × 12.5 × 5.9 inches
The Longer RAY5 10W with Y-Axis Extension pairs a 10W optical output diode laser with an expanded 400 x 850 mm (15.7 x 33.5 inch) working area. It features a fine 0.06 x 0.06 mm laser focus spot, a top engraving speed of 10,000 mm/min, and an included plug-and-play air assist pump with a 2-meter tube. This setup suits you if you need to engrave or cut long workpieces.
Pros
- Expanded 400 x 850 mm working bed for long materials
- Fine 0.06 x 0.06 mm laser spot for detailed engraving
- Includes plug-and-play air assist pump with 2 m tube
- 10,000 mm/min maximum engraving speed
Cons
- Extended length requires substantial workbench space
- Open-frame construction lacks a built-in protective enclosure
Good fit if
- You work on long signs, boards, or materials up to 850 mm in length.
- You want an included air assist pump to minimize cut edge burning.
- You need a fine 0.06 x 0.06 mm focal spot for detailed linework.
Skip if
- You have a small desk that cannot fit an extended Y-axis frame.
- You need an enclosed machine with built-in laser filtering.
Verdict: Longer RAY5 10W with Y-Axis Extension provides a large 400 x 850 mm workspace and an included air assist kit for handling extended cutting and engraving tasks.
Longer Ray5 10W with Rotary and Air Assist
Best for: cylindrical projects and tall object engraving
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400 x 401 mm
- Engraving Speed
- Up to 10,000 mm/min
- Cutting Capacity
- 20mm wood, 30mm acrylic
- Dimensions
- 24.4 × 11.8 × 10.1 inches
This 10W diode laser engraver pairs a 400 x 401 mm work area with an included 4-in-1 rotary attachment and an adjustable air assist kit. Operating at speeds up to 10,000 mm/min with a 0.06 x 0.06 mm spot, it cuts up to 20 mm wood and 30 mm acrylic. It suits makers who want out-of-the-box hardware for cylindrical engraving and cleaner cutting without purchasing add-ons separately.
Pros
- Includes 4-in-1 rotary attachment and 12 stackable risers up to 180 mm
- Adjustable air assist kit (10–30 L/min) included
- Built-in 3.5-inch color touchscreen with Wi-Fi, app, TF card, and USB support
- Fine 0.06 x 0.06 mm laser spot with 0.01 mm engraving precision
Cons
- Maximum speed is limited to 10,000 mm/min
- Open-frame construction lacks a built-in protective enclosure
Good fit if
- You plan to engrave cylindrical items like mugs, glasses, and bottles.
- You need vertical clearance up to 180 mm for bulky workpieces.
- You want offline control via a dedicated touchscreen and Wi-Fi.
Skip if
- You require engraving speeds faster than 10,000 mm/min.
- You need an enclosed machine workspace for containment.
Verdict: Longer Ray5 10W with Rotary and Air Assist delivers a complete bundle for curved and tall objects, backed by integrated air assist and versatile offline controls.
Longer Ray5 10W Laser Engraver
Best for: standalone offline engraving without a connected computer
- Laser Power
- 10W (what this guide is about)
- Working Area
- 14.7 "x14.7" (400*400mm)
- Engraving Speed
- 10,000mm per minute
- Cutting Capacity
- 0.8 inches/20mm wood, 1.2"/30mm acrylic
- Compatible Material
- Wood, Metal, Glass
- Features
- Offline Controller
This Longer Ray5 model pairs a 10W laser module with a 3.5-inch touchscreen for standalone, untethered jobs. You get a 400x400mm working area, an engraving speed up to 10,000mm/min, and a fine 0.06x0.06mm compressed laser spot. It cuts wood up to 20mm and acrylic up to 30mm thick. It suits your workspace if you want to run cutting or engraving tasks without keeping a computer connected.
Pros
- Integrated 3.5-inch touchscreen for direct offline operation
- Fine 0.06mm x 0.06mm compressed laser spot
- Versatile data transfer via Wi-Fi, app, TF card, and USB
- Solid cutting depth up to 20mm wood and 30mm acrylic
Cons
- Top speed capped at 10,000mm/min
- Air assist pump is not included in the package
Good fit if
- You want to engrave directly from a TF card or app using a built-in touchscreen
- You need a standard 400x400mm work bed for home or DIY projects
- You prioritize fine detail work with a tight 0.06x0.06mm focal spot
Skip if
- You require speeds higher than 10,000mm/min for faster batch jobs
- You need an included air pump or an enclosed work area out of the box
Verdict: Longer Ray5 10W Laser Engraver delivers reliable cutting power and detailed output with the added convenience of full offline control via its integrated 3.5-inch touchscreen. It is a solid choice when you want to run jobs without a tethered PC.
Longer Ray5 miniS 10W Enclosed Laser Engraver
Best for: compact desktop crafting and small-batch production
- Laser Power
- 10W (what this guide is about)
- Laser Type
- Diode
- Working Area
- 130×125mm
- Engraving Speed
- Up to 12,000mm/min
- Software Compatibility
- LightBurn, LaserGRBL
- Form Factor
- Fully enclosed (Class 1)
View on Amazon: Longer Ray5 miniS 10W Enclosed Laser Engraver
The Longer Ray5 miniS pairs a 10W diode laser with a fully enclosed Class 1 safety design. It provides a compact 130×125mm work area, travel speeds up to 12,000mm/min, and an ultra-fine 0.06×0.06mm laser spot. The machine arrives pre-assembled and connects via Wi-Fi, USB, a mobile app, or micro-SD card. If you want a desktop-friendly cutter for small batches without configuring an external safety tent, this fits your bench.
Pros
- Fully enclosed Class 1 build with auto-stop lid sensor and exhaust fan
- Engraving speeds reaching up to 12,000mm/min driven by a 240MHz ESP32 chip
- Fine 0.06×0.06mm laser spot delivering 0.01mm repeat accuracy
- Versatile control options supporting Wi-Fi, mobile app, USB, and offline micro-SD
Cons
- Work area is restricted to 130×125mm
- Air assist kit, honeycomb panel, and rotary roller require separate purchases
Good fit if
- You need a Class 1 enclosed machine that automatically shuts off when opened.
- You work on smaller desktop items like jewelry, coasters, and small signage.
- You prefer a pre-assembled unit that operates over Wi-Fi or offline via micro-SD.
Skip if
- You intend to cut or engrave sheet materials larger than 130×125mm.
- You want an included air pump or honeycomb bed straight out of the box.
Verdict: Longer Ray5 miniS 10W Enclosed Laser Engraver is a plug-and-play desktop tool built for makers who prioritize Class 1 enclosure safety and fine-spot detail over wide cutting dimensions.
Longer Ray5 miniS 10W Enclosed Engraver
Best for: enclosed desktop engraving for small craft projects
- Laser Power
- 10W (what this guide is about)
- Working Area
- 120 * 130MM
- Engraving Speed
- 12,000mm/min
- Software Compatibility
- LightBurn, LaserGRBL, LONGER LaserBurn
- Form Factor
- Fully Enclosed
- Features
- Enclosure
The Longer Ray5 miniS 10W Enclosed Engraver gives you an enclosed desktop design that arrives pre-assembled. It features a 10W optical output diode, a fine 0.06mm laser spot, and engraving speeds reaching 12,000mm/min. A 360-degree acrylic enclosure and door sensors protect your workspace and pause operation when opened. With a compact 120 by 130mm work area, it suits makers prioritizing built-in containment and rapid setup over broad cutting beds.
Pros
- Fully enclosed acrylic housing with auto-pausing door detection
- Pre-assembled construction for quick initial setup
- Fine 0.06mm laser spot with speeds up to 12,000mm/min
- Built-in exhaust fan helps manage smoke and fumes
- Supports USB, Wi-Fi, and mobile app operation
Cons
- Small working area limited to 120 x 130mm
- Exhaust pipe and mounting flange are sold separately
Good fit if
- You want a fully enclosed 10W laser with built-in safety door interlocks.
- You prefer an out-of-the-box pre-assembled frame over kit assembly.
- You primarily engrave smaller items fitting within 120 by 130mm.
Skip if
- You need to engrave large panels or items wider than 130mm.
- You need external venting hardware included in the box.
Verdict: Longer Ray5 miniS 10W Enclosed Engraver delivers contained, benchtop-friendly laser work with integrated safety interlocks, exchanging larger cutting capacity for a pre-assembled, protected enclosure.
Longer RAY5 10W Laser Engraver with Bed
Best for: scorch-free paper and delicate sheet cutting
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400 x 400mm
- Engraving Speed
- up to 10,000 mm/min
- Cutting Capacity
- 20mm wood, 30mm acrylic
- Compatible Material
- Wood, Metal, Acrylic, Leather, Glass, Paper
- Target Audience
- DIY
This package equips the Longer Ray5 10W laser engraver with an adjustable 10 to 30 L/min air pump and a 17.3 by 17.3-inch honeycomb working table. It offers a 400 by 400 mm work area and operates at speeds up to 10,000 mm/min. If you work extensively with paper, wood, or acrylic, the included air assist and ventilated bed help suppress smoke, prevent scorching, and keep edges clean.
Pros
- Includes adjustable 10–30 L/min air pump operating at 60 dB
- Comes with a 17.3 x 17.3-inch honeycomb table and aluminum panel
- Dual-beam 10W module reaches engraving speeds up to 10,000 mm/min
- Generous 400 x 400 mm standard working area
- Built-in motion stop and thermal flame detection alarms
Cons
- Open-frame construction requires safety glasses rather than a full enclosure
- Top engraving speed is capped at 10,000 mm/min
Good fit if
- You want an all-in-one bundle with both air assist and a honeycomb bed
- You cut delicate stock like paper, leather, or acrylic and need scorch prevention
- You need standard 400 x 400 mm desktop engraving dimensions
Skip if
- You require an enclosed machine for passive fume and glare containment
- You need engraving speeds higher than 10,000 mm/min
Verdict: Longer Ray5 10W with Air Pump & Honeycomb Bed combines essential airflow and under-material ventilation to deliver clean, scorch-free cuts on paper and sheet goods right out of the box.
Longer RAY5 10W with Extension Kit & Air Pump
Best for: engraving long signs and oversized cutting projects
- Laser Power
- 10W (what this guide is about)
- Working Area
- 850mm x 400mm (33.46" x 15.75")
- Engraving Speed
- Up to 10,000 mm/min
- Cutting Capacity
- 20 mm wood, 30 mm acrylic
- Compatible Material
- Wood, Glass
- Features
- Touchscreen
View on Amazon: Longer RAY5 10W with Extension Kit & Air Pump
This 10W diode laser engraver pairs the Longer RAY5 platform with a Y-axis extension kit and an air assist pump. The hardware expands your workspace to 850 x 400 mm, while the 10 to 30 L/min pump clears smoke during cutting passes up to 10,000 mm/min. With a 3.5-inch color touchscreen and TF card offline engraving, it suits you if you need to process long signs, panels, or batch cuts.
Pros
- Extended 850 x 400 mm working area accommodates extra-long stock
- Included 10–30 L/min adjustable air pump operates at 60 dB
- Color 3.5-inch touchscreen enables offline engraving via TF card or Wi-Fi
- Limit switch kit defines physical boundaries and halts negative overrun
Cons
- Extended 33.46-inch length requires substantial dedicated bench space
- Maximum engraving speed is limited to 10,000 mm/min
Good fit if
- You need an elongated 850 x 400 mm work surface for oversized boards or batch runs.
- You want an included air pump to assist with cleaner cuts in wood and acrylic.
- You prefer standalone operation using a touchscreen without a constant computer connection.
Skip if
- You have a compact workbench that cannot accommodate a 33.46-inch long frame.
- You require a fully enclosed laser chassis rather than an open-frame design.
Verdict: Longer RAY5 10W with Extension Kit & Air Pump provides an expanded 850 x 400 mm bed and dedicated air assist in a single package. It gives you the cutting area and debris clearance needed for oversized boards without requiring separate add-on purchases.
Longer Ray5 10W Laser Engraver with Touchscreen
Best for: standalone offline laser cutting and engraving projects
- Laser Power
- 10W (what this guide is about)
- Working Area
- 400 x 400 mm
- Engraving Speed
- 10,000 mm/min
- Cutting Capacity
- 0.8" (20mm) wood, 1.2" (30mm) acrylic
- Compatible Material
- Wood, Metal, Acrylic, Glass
- Features
- Touchscreen
View on Amazon: Longer Ray5 10W Laser Engraver with Touchscreen
This 10W diode laser engraver features a standard 400 x 400 mm working area and an integrated 3.5-inch touchscreen. It cuts wood up to 20 mm thick and acrylic up to 30 mm thick, running at speeds up to 10,000 mm/min. You can transfer projects using Wi-Fi, an app, a USB cable, or a TF card. It suits DIY users who prefer running jobs without a tethered computer.
Pros
- Built-in 3.5-inch touchscreen for standalone offline operation
- Four connection choices: Wi-Fi, app, USB cable, and TF card
- Safety shutoff triggered by abnormal shaking detection
- Cuts wood up to 20 mm and acrylic up to 30 mm
Cons
- Extension kit to reach 850 x 400 mm requires a separate purchase
- Air assist pump is not included in the package
Good fit if
- You want to operate your laser engraver offline using a touchscreen and TF card
- You cut thicker wood stock up to 20 mm or acrylic up to 30 mm
- You prefer multiple file transfer options including Wi-Fi and mobile app control
Skip if
- You require an included air assist pump directly in the box
- You need an expanded 850 x 400 mm workspace without purchasing add-on hardware
Verdict: Longer Ray5 10W Laser Engraver with Touchscreen delivers dependable 10W cutting capabilities with versatile connectivity and built-in screen controls.
Specifications side by side
| Spec | Longer Ray5 10W Laser Engraver | Longer Ray5 10W Laser Engraver with Touchscreen | Longer Ray5 MiniS 10W Laser Engraver | Longer Ray5 miniS 10W Enclosed Laser Engraver | Longer Ray5 10W Laser Engraver | Longer RAY5 10W with Air Assist & Rotary | Longer Ray5 10W Laser Engraver Bundle | Longer RAY5 10W Extended Engraver | Longer Ray5 10W with Rotary and Air Assist | Longer Ray5 10W Laser Engraver | Longer Ray5 miniS 10W Enclosed Laser Engraver | Longer Ray5 miniS 10W Enclosed Engraver | Longer RAY5 10W Laser Engraver with Bed | Longer RAY5 10W with Extension Kit & Air Pump | Longer Ray5 10W Laser Engraver with Touchscreen |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Laser Type | not specified | not specified | not specified | Diode | not specified | not specified | not specified | not specified | not specified | not specified | Diode | not specified | not specified | not specified | not specified |
| Laser Power | 10W | 10W | 10W | 10W | 10W (10000mW) | 10W | 10W | 10W (10,000 mW) | 10W | 10W | 10W | 10W | 10W | 10W | 10W |
| Working Area | 400 x 400 mm | 400x400mm | 131 × 125 mm | 125 x 130 mm | 400x400mm | 400×400mm | 400 × 400 mm | 400 x 850 mm (15.7" x 33.5") | 400 x 401 mm | 14.7 "x14.7" (400*400mm) | 130×125mm | 120 * 130MM | 400 x 400mm | 850mm x 400mm (33.46" x 15.75") | 400 x 400 mm |
| Engraving Speed | Up to 24,000 mm/min | 10,000mm/min | 12,000 mm/min | Up to 12,000 mm/min | 10,000mm/min | Up to 10,000 mm/min | 24,000 mm/min | 10,000 mm/min | Up to 10,000 mm/min | 10,000mm per minute | Up to 12,000mm/min | 12,000mm/min | up to 10,000 mm/min | Up to 10,000 mm/min | 10,000 mm/min |
| Software Compatibility | LaserGRBL, LightBurn | LaserGRBL, LightBurn | LaserGRBL, LightBurn, LaserBurn | LightBurn, LaserGRBL, Mobile App | LaserGRBL, LightBurn | LaserGRBL, LightBurn | LaserGRBL, LightBurn, LaserBurn | not specified | not specified | not specified | LightBurn, LaserGRBL | LightBurn, LaserGRBL, LONGER LaserBurn | not specified | not specified | not specified |
| Form Factor | not specified | not specified | not specified | Fully enclosed (Class 1) | not specified | not specified | not specified | not specified | not specified | not specified | Fully enclosed (Class 1) | Fully Enclosed | not specified | not specified | not specified |
| Cutting Capacity | not specified | 0.8" (20mm) wood, 1.2" (30mm) acrylic | 5 mm basswood, 3 mm acrylic | not specified | 0.8"/20mm wood, 1.2"/30mm acrylic | 20mm solid wood, 30mm acrylic | not specified | not specified | 20mm wood, 30mm acrylic | 0.8 inches/20mm wood, 1.2"/30mm acrylic | not specified | not specified | 20mm wood, 30mm acrylic | 20 mm wood, 30 mm acrylic | 0.8" (20mm) wood, 1.2" (30mm) acrylic |
| Compatible Material | not specified | Wood, Metal, Acrylic, Glass | not specified | not specified | Wood, Metal, Acrylic, Glass | Wood, Acrylic, Leather | not specified | Silver | not specified | Wood, Metal, Glass | not specified | not specified | Wood, Metal, Acrylic, Leather, Glass, Paper | Wood, Glass | Wood, Metal, Acrylic, Glass |
| Features | not specified | Touchscreen | not specified | not specified | Touchscreen | Air Assist | not specified | not specified | not specified | Offline Controller | not specified | Enclosure | not specified | Touchscreen | Touchscreen |
| Target Audience | not specified | DIY | not specified | not specified | DIY | DIY | not specified | not specified | not specified | DIY | not specified | not specified | DIY | DIY | DIY |
| Size | 400×400mm | 10W | 131×125mm | 125x130mm | not specified | 400 * 401mm | 400×400mm | 400*850mm | 400 * 401mm | 400x400mm | 130*120mm | 120 * 130MM | 10W | 15.75" x 33.47" | 10 |
| Dimensions | 24.5 × 12 × 5 inches | 25.4 × 17.1 × 12.8 inches | 12.6 × 12.6 × 7.87 inches | 12.6 × 12.1 × 7.87 inches | not specified | not specified | 24.4 × 11.8 × 10.1 inches | 24 × 12.5 × 5.9 inches | 24.4 × 11.8 × 10.1 inches | 23.6 × 12.2 × 5.9 inches | 13.3 × 13 × 7.79 inches | not specified | 29.3 × 5.31 × 22.4 inches | not specified | 24 × 12 × 5 inches |
| Color | black | 10w | Black & Orange | Black&Orange | 10w | Black bundle | black | Black, Silver | JetBlack-10W | Black | Deep Black,Orange | Orange | RAY5+17.3"Honeycomb Bed | Black | Black 10W |
| Model | Ray5 10W | 10W | Ray5 miniS 5.5w | Ray5 miniS | Ray5 10W | RAY5 | Ray5 bundle 10W | 20240624 | not specified | 20240624 | MINIS-10W-VC | RAY5 miniS | RAY5 | RAY5 | RAY5 |
If you also need regular document output, specifications for the best monochrome laser printers outline standard desktop print hardware.
How to Choose a Longer 10W Engraver
-
Evaluating Bed Expansion Options
Check the work area dimensions if you cut oversized stock. While standard frames measure 400 × 400 mm, some projects require much more length. The Longer RAY5 10W Extended Engraver expands this workspace to 400 × 850 mm. That extended Y-axis lets you produce long signs or batch parts without manually repositioning the material. If your work fits within 400 mm lengths, standard frames keep your overall bench footprint much more compact.
-
Checking Material Compatibility Lists
Review the listed material specifications before deciding on a model. Different listings highlight distinct material support depending on included components and configurations. For example, the Longer Ray5 10W Laser Engraver with Touchscreen lists compatibility for wood, metal, acrylic, and glass. Other packages add ratings for leather or paper. Check that your intended substrates match the manufacturer specifications directly so you know the 10W laser module is suited for your specific engraving jobs.
-
Selecting Bundled Air Assist
Check whether an air assist pump is included in the package. Laser cutting can leave burn marks and smoke residue along the edges of organic materials like wood or acrylic. Bundles such as the Longer RAY5 10W with Air Assist & Rotary supply a variable-flow pump to clear debris from the focal path. If your main objective is clean cutting rather than surface engraving, selecting a bundle with factory air assist prevents excessive charring.
-
Choosing Rotary Accessory Packages
Verify whether a configuration includes rotary rollers if you intend to etch curved items. Standard laser beds only support flat boards and sheet goods. The Longer Ray5 10W Laser Engraver Bundle provides dedicated rotary hardware for cylindrical items such as tumblers. If you plan to engrave bottles or rounded objects, choosing a bundle with this accessory included ensures proper mechanical compatibility. If you only process flat panels, bypass rotary kits to avoid unused hardware.
-
Verifying Standalone Offline Controls
Check how you will control and run your engraving jobs. Some configurations, such as the Longer Ray5 10W Laser Engraver, integrate an offline controller with a 3.5-inch touchscreen. This allows you to load files and execute projects without maintaining a continuous USB connection to an external computer. If your shop environment is dusty or lacks table space for a dedicated laptop, choosing a model with standalone touchscreen capability gives you a self-contained operating setup.
-
Reviewing Bed Support Surfaces
Examine what support base is provided for through-cutting operations. Standard open setups place stock on a flat backing, which can trap smoke beneath your material. The Longer RAY5 10W Laser Engraver with Bed includes a 17.3-inch honeycomb bed designed for under-material ventilation. This spacing allows exhaust airflow to clear under the cut line, helping prevent scorch marks when cutting delicate sheet goods or paper. For clean cutting passes, prioritize bundles that include a honeycomb base.
Frequently asked questions
What materials can you process with a Longer 10W laser engraver?
A Longer 10W laser works across varied materials specified by the manufacturer. These include wood, acrylic, glass, metal, paper, leather, and silver. A 10W diode beam cuts softer sheet goods like thin wood, craft paper, and opaque acrylic. It also etches the surface of hard materials like coated metals, glass, and leather without cutting completely through them.
What is the maximum operating speed of the Longer Ray5 10W?
The Longer Ray5 10W reaches movement speeds up to 24,000 mm/min. Running at this maximum speed helps you finish light surface marking and line engraving quickly. When cutting through denser stock like plywood or acrylic, you will need to lower your travel speed so the 10W optical beam can penetrate through the full thickness of the sheet.
Can you run a Longer 10W laser engraver without a connected computer?
Yes, several Longer Ray5 10W models support standalone offline operation. Units equipped with the built-in 3.5-inch touchscreen allow you to control jobs without a tethered PC. You can load your project files, adjust settings on the screen, and start engraving jobs directly from the engraver chassis, which keeps your primary computer free for design tasks.
What is the work area difference between the standard Ray5 and the Ray5 miniS?
The standard Longer Ray5 provides a 400 × 400 mm workspace, while the Ray5 miniS provides a compact area between 120 × 130 mm and 131 × 125 mm. The miniS trades cutting area for a pre-assembled, enclosed housing. If you engrave small items like badges, coasters, or small crafts, the miniS fits easily onto crowded desks.
Why should you choose a Longer 10W bundle with an air assist pump?
An air assist pump blows smoke, fumes, and debris away from the laser focus point while cutting. Bundles with air assist help reduce charring and heat discoloration on materials like wood and paper. Maintaining steady airflow also keeps vaporized resin and dust off the laser lens, which helps preserve beam clarity during long cutting runs.
What hardware do you need to engrave cylindrical items on a Longer 10W?
You need a rotary roller attachment to engrave cylindrical items like tumblers, cups, and glassware. Specific Longer bundles include both a rotary unit and an air assist pump. The rotary accessory rotates your round workpiece along the axis as the laser fires, ensuring your design wraps evenly around the curved surface instead of distorting on a flat plane.
What bed size does an extended Longer 10W engraver provide?
Extended Longer RAY5 10W configurations expand your total workspace to 400 × 850 mm. This setup lengthens the standard Y-axis travel by more than double the original 400 mm frame. The expanded workspace allows you to engrave long wooden signs, panels, and large-batch projects without having to reposition or shift your material manually mid-job.