KoveYzao ATOMSTACK P1 Dual Laser Engraver vs KoveYzao SCULPFUN iCube Ultra 12000mW Laser Engraver: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This koveyzao atomstack p1 dual laser engraver vs sculpfun icube ultra comparison focuses on two enclosed diode laser systems. Both units offer Class 1 safety and support LightBurn software. The main difference lies in their power and versatility. The ATOMSTACK P1 Dual combines a 5000mW diode laser with a 1200mW IR module for metal marking. The SCULPFUN iCube Ultra provides a single, more powerful 12000mW diode laser for faster cutting. You need to decide if dual-laser flexibility or raw cutting power matters more for your projects.
Key differences
| Aspect | ATOMSTACK P1 Dual 5W Diode & IR | SCULPFUN iCube Ultra 12000mW |
|---|---|---|
| Laser Type | Diode & Infrared | Diode |
| Laser Power | 5000mW Diode & 1200mW IR | 12000mW Diode |
| Cutting Capacity | 3mm basswood plywood | 5mm plywood |
| Focus Method | Manual quick focusing | One-click auto focus |
| Air Management | Not listed | Built-in smoke filter and exhaust hose |
Which one should you choose?
Choose ATOMSTACK P1 Dual 5W Diode & IR if
- You need to engrave metals and plastics using an infrared laser
- You prefer a lighter, more compact machine for small workspaces
- You want to switch between cutting wood and marking metals easily
Choose SCULPFUN iCube Ultra 12000mW if
- You require higher power for cutting thicker materials like 5mm plywood
- You want faster setup with one-click auto focusing
- You need built-in smoke filtration for cleaner indoor operation
Verdict: Choose the ATOMSTACK P1 Dual if you need the versatility of an infrared laser for metal marking. Choose the SCULPFUN iCube Ultra if you prioritize higher diode power for thicker cuts and convenient auto-focusing features.
Dual Laser vs Raw Power
Laser type
The ATOMSTACK P1 Dual offers a unique 2-in-1 configuration with a 5000mW diode laser and a separate 1200mW infrared laser. This allows you to switch modules to mark metals like stainless steel, aluminum, and brass, which standard diode lasers cannot touch. The SCULPFUN iCube Ultra relies solely on a high-power 12000mW diode laser. While it handles over 200 materials including oxidized metals, it lacks the dedicated IR source for fine metal marking. If you need to engrave bare metals without spray, the P1 Dual is the clear choice for versatility.
Laser power
Raw cutting speed depends heavily on wattage. The SCULPFUN iCube Ultra features a massive 12000mW diode laser. This power allows it to cut 5mm plywood in a single pass and handle thicker materials faster than most desktop units. The ATOMSTACK P1 Dual uses a 5000mW diode laser. While sufficient for cutting 3mm basswood plywood, it cannot match the iCube Ultra’s depth or speed on thicker stock. If your primary goal is rapid cutting of wood or acrylic, the iCube Ultra’s higher wattage provides a significant efficiency advantage.
Focus mechanism
Setup time matters for workflow efficiency. The SCULPFUN iCube Ultra includes a one-click auto-focus function. You press a button, and the machine adjusts the lens height automatically, eliminating tedious manual adjustments. The ATOMSTACK P1 Dual requires manual quick focusing. You must physically adjust the focus ring to align the laser spot. For users who switch between different material thicknesses frequently, the iCube Ultra’s automated system saves time and reduces the risk of misalignment errors compared to the manual method.
Working area
The size of your project determines the required workspace. The ATOMSTACK P1 Dual provides a 110 × 110mm working area. This compact space is suitable for small items like rings, jewelry, and phone cases. The SCULPFUN iCube Ultra offers a larger footprint, though specific X/Y dimensions are not explicitly listed in the key specs, its overall larger body suggests more capacity. However, for small, precise DIY crafts and gifts, the P1 Dual’s 110mm square area is often sufficient and keeps the machine compact on your desk.
Air purification
Indoor engraving requires managing smoke and fumes. The SCULPFUN iCube Ultra comes with a built-in smoke filter system and an exhaust hose. This integrated solution helps filter most fumes directly from the source, reducing the need for external equipment. The ATOMSTACK P1 Dual does not list a built-in filtration system in its data. You would need to purchase an optional air purifier separately and connect it to manage air quality. For users wanting an all-in-one solution for clean operation, the iCube Ultra has a clear advantage.
Size and weight
Desk space and portability are key for home workshops. The ATOMSTACK P1 Dual is significantly smaller and lighter. It measures 10.4 × 11.93 × 7.28 inches and weighs approximately 6.7 lbs. The SCULPFUN iCube Ultra is larger, measuring 13.0 × 14.2 × 11.4 inches and weighing 17.6 pounds. If you have limited desk space or need to move the machine frequently, the P1 Dual is much easier to handle. The iCube Ultra requires a sturdier, larger surface to accommodate its bulk.
Which laser engraver fits your needs
Users needing metal marking capability
The ATOMSTACK P1 Dual includes a 1200mW infrared laser module. You can switch between this IR laser and the 5000mW diode laser. This setup allows you to engrave on coated metals, stainless steel, and titanium. The other model lacks this infrared option, limiting you to organic materials and oxidized surfaces only.
Those prioritizing cutting thick wood
The SCULPFUN iCube Ultra features a 12000mW diode laser. It cuts 5mm plywood in a single pass, compared to the 3mm limit of the P1 Dual. The higher power density also enables faster processing speeds. If your main goal is cutting thicker materials like black acrylic or cardboard quickly, this raw power is superior.
Beginners wanting quick setup
The iCube Ultra offers one-click auto-focus, removing the need for manual adjustments. It also includes a built-in smoke filter and exhaust hose, simplifying ventilation needs. The ATOMSTACK P1 requires manual quick focusing and does not list an integrated smoke filtration system. For a smoother start, the auto-focus and built-in filters reduce initial friction.
The products compared
ATOMSTACK P1 Dual 5W Diode & IR
Best for: Small wood and metal engraving projects
- Laser Type
- Diode & Infrared
- Laser Power
- 5000mW Diode & 1200mW IR
- Working Area
- 110 × 110mm
- Engraving Speed
- Up to 10000mm/min
- Software Compatibility
- AtomStack Studio, LaserGRBL, LightBurn
- Form Factor
- Enclosed Class 1
View on Amazon: ATOMSTACK P1 Dual 5W Diode & IR Affiliate link
The ATOMSTACK P1 Dual combines a 5000mW diode laser and a 1200mW infrared laser in one enclosed Class 1 unit. You get a 110 × 110mm working area with speeds up to 10000mm/min. It cuts 3mm basswood and marks metals. The compact 6.7 lb frame fits small spaces. It suits hobbyists who need to switch between wood and metal engraving without buying two machines.
Pros
- Dual 5000mW diode and 1200mW IR laser modules
- Enclosed Class 1 safety design with interlock
- Compatible with LightBurn and LaserGRBL software
- Cuts up to 3mm basswood in one pass
Cons
- Small 110 × 110mm working area
- Limited 3mm cutting depth for wood
- Manual quick focusing system
Good fit if
- You need to engrave both wood and coated metals
- You have limited desk space for a compact unit
- You want a pre-assembled machine for quick setup
Skip if
- You require large format engraving beyond 110mm
- You need to cut thick materials over 3mm
- You prefer automatic focusing for speed
Verdict: ATOMSTACK P1 Dual Laser Engraver fits hobbyists who need a compact, safe machine for small wood and metal projects. It is not for users needing large workspaces or heavy cutting power.
SCULPFUN iCube Ultra 12000mW
Best for: DIY creators needing enclosed safety and speed
- Laser Type
- Diode
- Laser Power
- 12000mW
- Engraving Speed
- 10000 mm/min
- Software Compatibility
- SCULPFUN App, LightBurn, LaserGRBL
- Form Factor
- Fully enclosed (Class 1)
- Cutting Capacity
- 5 mm plywood
View on Amazon: SCULPFUN iCube Ultra 12000mW Affiliate link
The KoveYzao iCube Ultra is a fully enclosed Class 1 laser engraver with a 12000mW diode laser. It reaches engraving speeds of 10000 mm/min and cuts 5 mm plywood. The unit measures 13.0×14.2×11.4 inches and weighs 17.6 pounds. It supports smartphone and PC control via Bluetooth or Type-C. This model suits DIY creators needing high precision on over 200 materials.
Pros
- 12000mW diode laser with 0.08 mm spot size
- Fully enclosed Class 1 safety design
- Engraving speed up to 10000 mm/min
- Built-in smoke filter and exhaust hose
- One-click auto focus function
Cons
- 17.6 pounds weight limits portability
- Limited to 5 mm cutting depth
- No mention of rotary accessory inclusion
Good fit if
- You want a fully enclosed Class 1 laser for home use
- You need high-speed engraving for detailed projects
- You prefer smartphone or PC control via Bluetooth
Skip if
- You require cutting materials thicker than 5 mm
- You need a lightweight unit for frequent transport
- You prefer open-frame designs for large materials
Verdict: KoveYzao iCube Ultra 12000mW fits DIY creators who need a safe, enclosed desktop engraver with high precision and fast speeds for small to medium projects.
Specifications side by side
| Spec | ATOMSTACK P1 Dual 5W Diode & IR | SCULPFUN iCube Ultra 12000mW |
|---|---|---|
| Laser Type | Diode & Infrared | Diode |
| Laser Power | 5000mW Diode & 1200mW IR | 12000mW |
| Working Area | 110 × 110mm | not stated |
| Engraving Speed | Up to 10000mm/min | 10000 mm/min |
| Software Compatibility | AtomStack Studio, LaserGRBL, LightBurn | SCULPFUN App, LightBurn, LaserGRBL |
| Form Factor | Enclosed Class 1 | Fully enclosed (Class 1) |
| Cutting Capacity | Up to 3mm basswood plywood | 5 mm plywood |
| Target Audience | not stated | DIY |
| Dimensions | 10.4 × 11.9 × 7.28 inches | 13 × 14.2 × 11.4 inches |
| Weight | 11 pounds | 17.6 pounds |
| Color | P1 Dual | Navy |
| Model | P1 | iCube Ultra |
Frequently asked questions
Which machine is smaller and lighter for tight spaces?
The ATOMSTACK P1 Dual is the more compact option. It measures 11.9 inches wide, 7.28 inches high, and 10.4 inches long. It also weighs only 11 pounds. This makes it easier to fit on smaller desks or move around compared to the SCULPFUN iCube Ultra.
Does the SCULPFUN iCube Ultra have a larger workspace?
Yes, the SCULPFUN iCube Ultra is physically larger. It measures 14.2 inches wide, 11.4 inches high, and 13 inches long. It also weighs 17.6 pounds. This extra size may accommodate slightly larger projects, though both are designed for desktop use.
Can I engrave metal with the ATOMSTACK P1 Dual?
Yes, it supports metal engraving. The ATOMSTACK P1 Dual includes a 1200mW infrared laser module. You can switch this module to mark metals like stainless steel, aluminum, and brass. The standard diode laser handles wood and other materials.
Which engraver is better for DIY creators?
The SCULPFUN iCube Ultra is targeted at DIY creators. It offers an enclosed design for safety and high precision. It is suitable for small to medium projects where speed and safety are priorities. It does not include the dual-module versatility of the P1 Dual.
Is the ATOMSTACK P1 Dual suitable for small wood projects?
It is a good fit for small wood projects. The machine is compact and designed for hobbyists. It provides safe operation for small-scale work. However, it is not intended for users who need large workspaces or heavy cutting power for thick materials.
Do both machines support LightBurn software?
Yes, both units support LightBurn software. This allows you to design and control your projects using a familiar interface. This compatibility is standard for these types of enclosed diode laser systems and helps streamline your workflow.
Which model is heavier?
The SCULPFUN iCube Ultra is heavier. It weighs 17.6 pounds. The ATOMSTACK P1 Dual weighs 11 pounds. The difference in weight reflects the build and components of each machine, with the iCube Ultra being more substantial.