KoveYzao vs Carverall: Laser Engravers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This carverall vs KoveYzao laser engraver guide compares the Carverall K15 Pro and the AtomStack Swift. Both machines target beginners with compact designs and straightforward software. The main difference lies in their laser power and speed. The Swift offers higher wattage and faster engraving, while the K15 Pro prioritizes precision and mobile app control. You should choose based on whether you need raw cutting power or detailed accuracy.
Key differences
| Aspect | AtomStack Swift 7W Laser Engraver | Carverall 6W Desktop Laser Engraver |
|---|---|---|
| Laser Power | 7W (7000mW) | 6W (6000mW) |
| Engraving Speed | 10,000 mm/min | 15,000 mm/min |
| Working Area | 300 x 300 mm | 11.8 x 7.9 inches (A4) |
| Cutting Capacity | 4mm to 6mm basswood plywood | 8mm plywood, 5mm black acrylic |
| Precision | 0.08mm | 0.01mm |
| Software | LightBurn, LaserGRBL, AtomStack Studio | CutLabX, LightBurn, LaserGRBL |
Which one should you choose?
Choose AtomStack Swift 7W Laser Engraver if
- You need to cut thicker wood or acrylic in fewer passes.
- You prefer a larger square engraving area for wider projects.
- You want faster engraving speeds for large batches.
Choose Carverall 6W Desktop Laser Engraver if
- You require high-precision details for small items like pet tags.
- You want to control the machine via a mobile app.
- You need to mark bare metals with an optional IR head.
Verdict: The AtomStack Swift is better for users who need more power and a larger workspace for general DIY projects. The Carverall K15 Pro suits those who prioritize fine detail, faster engraving speeds, and mobile app convenience. Choose the Swift for cutting capacity, and the K15 Pro for precision and versatility.
AtomStack Swift vs Carverall K15 Pro
Laser Power
The AtomStack Swift uses a 7000mW laser module, which Carverall lists as 7W. The Carverall K15 Pro features a 6W (6000mW) diode laser. Higher wattage generally translates to stronger cutting ability on thicker materials. The Swift’s extra 1000mW gives it a clear advantage in raw power for cutting tasks. You will see better performance when slicing through denser woods or multiple layers. The Carverall machine relies on its 6W output, which is sufficient for many daily projects but less potent than the Swift. If you need maximum cutting force, the Swift leads. If you prefer slightly lower power for delicate work, the Carverall is adequate.
Engraving Speed
Speed matters when you have multiple jobs to finish. The Carverall K15 Pro boasts an engraving speed of 15,000mm/min. The AtomStack Swift operates at 10,000mm/min. This means the Carverall can complete standard engraving tasks significantly faster. You will save time on repetitive designs or large surface areas. The Swift prioritizes precision over raw speed, offering 0.08mm accuracy. The Carverall claims 0.01mm precision. While the Carverall is faster, the Swift’s speed is still efficient for most beginner needs. For quick turnaround on simple projects, the Carverall’s higher speed is the better choice.
Cutting Capacity
Cutting capacity defines what materials you can slice through in one go. The AtomStack Swift can cut 4mm basswood plywood in a single pass. It handles 6mm basswood with multiple passes. The Carverall K15 Pro cuts 8mm plywood and 5mm black acrylic with multiple passes. The Carverall allows for thicker wood cutting, which is useful for sturdy signs or boxes. The Swift excels in single-pass efficiency for thinner materials. If you frequently cut thicker wood, the Carverall offers more versatility. If you prefer faster single-pass cuts for thinner projects, the Swift is superior. Both machines handle common DIY materials well.
Working Area
The workspace size determines the maximum dimensions of your projects. The AtomStack Swift provides a 300×300mm engraving area. This is roughly 11.8×11.8 inches. The Carverall K15 Pro has an A4-sized bed measuring 11.8×7.9 inches. The Swift offers a larger square area, allowing for wider designs without repositioning. The Carverall’s rectangular shape fits standard A4 paper sizes, which is convenient for document-style engravings. However, the Swift’s extra width provides more flexibility for broader projects like photo frames or skateboards. You can expand the Swift further with an optional Y-axis kit. The Swift wins for pure workspace volume.
Software Compatibility
Software options affect how easily you can design and send jobs. The AtomStack Swift works with LightBurn, LaserGRBL, and its own AtomStack Studio. It also supports the AtomStack App for smartphone control. The Carverall K15 Pro uses CutLabX, LightBurn, and LaserGRBL. It also supports mobile APP control and offline TF card loading. Both machines support industry-standard LightBurn. The Swift’s exclusive software includes automatic accessory recognition and material presets. The Carverall offers AI design generation via CutLabX. Both provide smartphone apps for convenience. The Carverall’s offline capability adds flexibility for users without constant PC access. It is a close tie, depending on your preference for AI features versus preset ease.
Which laser engraver fits your needs
Users needing faster engraving speeds
The Carverall K15 Pro engraves at 15,000mm/min, which is significantly faster than the AtomStack Swift’s 10,000mm/min rate. This higher speed reduces job times for repetitive tasks. You get 0.01mm precision with one-touch focus, ensuring sharp details quickly. The Carverall also supports offline jobs via TF card, adding workflow flexibility for quick prints without constant PC connection.
Buyers wanting stronger cutting power
The AtomStack Swift features a 7000mW laser module, providing more raw power than the Carverall’s 6000mW diode. This extra wattage allows the Swift to cut 4mm basswood plywood in a single pass. It handles 6mm plywood in multiple passes. If your projects involve thicker wood or denser materials, the Swift’s higher laser power offers better cutting capability and efficiency.
People who want metal engraving
The Carverall K15 Pro supports optional IR heads for bare metal marking. You can swap the 6W diode for a 1W IR head to engrave metals without buying a second machine. The AtomStack Swift data does not mention metal engraving capabilities or IR head compatibility. If marking metal is part of your workflow, the Carverall offers this expandable versatility.
Those prioritizing safety features
The AtomStack Swift includes a flame alarm that automatically shuts down the laser if a fire hazard is detected. It also has axis limit switches to prevent damage from collisions and tilt detection that stops operation if the machine tips more than 15 degrees. These specific safety sensors provide automated protection during unsupervised or unattended engraving sessions.
The products compared
AtomStack Swift 7W Laser Engraver
Best for: portable beginner projects with app control
- Laser Power
- 7000mW
- Working Area
- 300 x 300 mm
- Engraving Speed
- 10,000 mm/min (600 mm/s)
- Software Compatibility
- LightBurn, LaserGRBL, AtomStack Studio
- Cutting Capacity
- 4mm to 6mm basswood plywood
- Target Audience
- Beginners
View on Amazon: AtomStack Swift 7W Laser Engraver Affiliate link
The KoveYzao AtomStack Swift is a 7000mW laser engraver designed for beginners. It features a 300 x 300 mm working area and engraving speeds up to 10,000 mm/min. The compact unit weighs 2.8 kg and includes safety sensors like flame detection and tilt protection. You can control it via LightBurn, LaserGRBL, or the AtomStack app. It cuts up to 6mm basswood in multiple passes.
Pros
- 7000mW laser power for cutting up to 6mm basswood
- Fast engraving speed of 10,000 mm/min
- 0.08mm precision for detailed work
- Supports LightBurn, LaserGRBL, and AtomStack app control
- Includes flame alarm and tilt detection safety features
Cons
- Requires assembly within 5 minutes of unboxing
- No mention of a built-in air assist pump
- Standard 300 x 300 mm area without extension kit
Good fit if
- You need a portable machine under 3 kg
- You want app control for smartphone operation
- You require safety sensors for unattended use
Skip if
- You need a larger standard working area
- You prefer a machine that requires no assembly
- You need cutting capacity beyond 6mm basswood
Verdict: The KoveYzao AtomStack Swift 7W Engraver fits beginners who value portability and software flexibility over raw size. It delivers precise engraving and adequate cutting power for small DIY projects.
Carverall 6W Desktop Laser Engraver
Best for: beginners needing a compact A4 workspace
- Laser Type
- Diode
- Laser Power
- 6W
- Working Area
- A4
- Engraving Speed
- 15,000 mm/min
- Software Compatibility
- CutLabX, LightBurn, LaserGRBL
- Form Factor
- Class 1
View on Amazon: Carverall 6W Desktop Laser Engraver Affiliate link
The Carverall K15 Pro is a 6W diode laser engraver with a 11.8×7.9-inch A4 work area. It reaches 15,000mm/min and cuts 8mm plywood or 5mm black acrylic. You control it via the CutLabX app, LightBurn, or LaserGRBL. The Class 1 form factor includes safety goggles and tilt protection. It suits beginners and small businesses needing reliable daily performance.
Pros
- 6W diode laser delivers 0.01mm precision
- 15,000mm/min engraving speed
- 11.8×7.9-inch A4 work area
- Compatible with LightBurn and LaserGRBL
- Class 1 safety enclosure with tilt protection
Cons
- Smaller 11.8×7.9-inch work area limits large projects
- 6W power cuts thicker materials slower than higher-wattage models
- Requires optional IR head for bare metal marking
Good fit if
- You need a compact machine that fits under a desk
- You want app control and AI design features
- You are a beginner seeking simple assembly
Skip if
- You require a large format work area
- You need to cut thick wood in a single pass
- You want bare metal marking without buying extra parts
Verdict: Carverall K15 Pro 6W Laser Engraver fits beginners who value compact size and app-based control over raw cutting power.
Specifications side by side
| Spec | AtomStack Swift 7W Laser Engraver | Carverall 6W Desktop Laser Engraver |
|---|---|---|
| Laser Type | not stated | Diode |
| Laser Power | 7000mW | 6W |
| Working Area | 300 x 300 mm | A4 |
| Engraving Speed | 10,000 mm/min (600 mm/s) | 15,000 mm/min |
| Software Compatibility | LightBurn, LaserGRBL, AtomStack Studio | CutLabX, LightBurn, LaserGRBL |
| Form Factor | not stated | Class 1 |
| Cutting Capacity | 4mm to 6mm basswood plywood | 8 mm plywood, 5 mm black acrylic |
| Compatible Material | not stated | Wood, Metal, Acrylic, Leather, Paper |
| Target Audience | Beginners | DIY, Beginners, Small Business |
| Dimensions | 16.7 × 16.5 × 5.31 inches | 1 × 1 × 1 inches |
| Color | Swift 7W | Gray |
| Model | AtomStack Swift | K15 Pro |
| Size | not stated | 6W |
Frequently asked questions
Which laser engraver is better for portable beginner projects?
The KoveYzao AtomStack Swift is the better choice for portability. It is designed specifically for beginners who value compact size and app-based control. The Swift offers 7W of laser power, which provides precise engraving and adequate cutting for small DIY tasks. Its dimensions are 16.5 inches wide and 16.7 inches long, making it easy to fit on a desk or move between locations.
What is the difference in laser power between these two models?
The KoveYzao AtomStack Swift has 7W of laser power, while the Carverall K15 Pro has 6W. Higher wattage generally allows for stronger cutting ability on thicker materials. The Swift’s extra power makes it slightly more capable for deeper cuts. However, both machines are sufficient for most beginner-level engraving tasks on wood, acrylic, and leather.
Which machine has a larger work area?
The KoveYzao AtomStack Swift offers a larger workspace than the Carverall K15 Pro. The Swift measures 16.5 inches in width and 16.7 inches in length. This provides more room for larger projects. The Carverall K15 Pro is described as having a compact A4 workspace. If you need to engrave larger items, the Swift’s dimensions are more suitable for your needs.
Are these laser engravers suitable for small business use?
The Carverall K15 Pro is explicitly targeted at small business users. Its attributes list DIY, beginners, and small business as the target audience. The KoveYzao Swift focuses more on portable beginner projects. While both can handle small business tasks, the Carverall model is marketed specifically for that demographic. You should choose based on whether you prioritize business marketing or portability.
How wide is the KoveYzao AtomStack Swift engraver?
The KoveYzao AtomStack Swift is 16.5 inches wide. It also measures 16.7 inches in length and 5.31 inches in height. These dimensions make it a compact desktop unit. The width allows for standard A4-sized materials to fit comfortably within the engraving area. This size is ideal for users who need a capable machine that does not take up excessive desk space.
Can the Carverall K15 Pro engrave metal?
Yes, the Carverall K15 Pro can engrave metal. Its compatible materials list includes wood, metal, acrylic, leather, and paper. This versatility allows you to work with various surfaces. The 6W laser power is sufficient for marking metals. Just ensure you use appropriate settings for metal engraving to achieve clear and lasting results on your projects.