Creality vs Monport: Laser Engravers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing creality vs monport laser engraver options, you face two distinct technologies. Both brands offer machines compatible with LightBurn software, ensuring you have control over your designs. The main difference lies in the laser type and target materials. Creality uses a diode laser suited for wood and acrylic, while Monport provides a fiber laser designed specifically for metal marking. Your choice depends on whether you prioritize cutting organic materials or engraving industrial metals.
Key differences
| Aspect | Creality Falcon 10W Laser Engraver | Monport 20W Fiber Laser Engraver |
|---|---|---|
| Laser Type | Diode | Fiber |
| Laser Power | 10W | 20W |
| Compatible Material | Wood, Acrylic, Leather | Metal |
| Working Area | 17" x 16" | 110 x 110 mm |
| Software | LightBurn, LaserGRBL | LightBurn, BSLcad |
Which one should you choose?
Choose Creality Falcon 10W Laser Engraver if
- You need to cut wood or acrylic sheets.
- You require a larger working area for big projects.
- You are a DIY hobbyist starting with basic materials.
Choose Monport 20W Fiber Laser Engraver if
- You primarily engrave metals like steel or aluminum.
- You need high precision for small industrial markings.
- You want a fiber laser with a long lifespan.
Verdict: Choose the Creality if your work involves cutting wood or acrylic on a large scale. Pick the Monport if your focus is strictly on marking and engraving metals with high precision. These machines serve different material needs rather than competing directly.
Creality vs Monport: Spec Comparison
Laser Type
The Creality Falcon 10W uses a diode laser system, which is standard for hobbyist wood and plastic engraving. It is designed for general DIY projects. The Monport 20W is a fiber laser machine. Fiber lasers use a different technology optimized specifically for marking and engraving metals. This fundamental difference means they cannot process the same materials. You must choose the laser type based on whether you intend to work with wood and acrylic or focus on metal surfaces. The Monport’s fiber technology allows it to handle metals directly, whereas the Creality relies on diode emission.
Laser Power
Power output is a key specification for both machines. The Creality Falcon 10W delivers 10W of output power. Its internal machine power is listed as 72W, but the actual laser output is 10W. The Monport 20W provides 20W of output power. This is a Class 5 fiber laser. The Monport has double the output power of the Creality. Higher power generally allows for faster engraving and deeper cuts on compatible materials. For metal marking, the Monport’s 20W fiber laser offers significantly more energy density than the Creality’s 10W diode source. This makes the Monport more efficient for deep engraving tasks on metal.
Compatible Material
Material compatibility defines what you can engrave. The Creality Falcon 10W works on wood, leather, plastic, paper, glass, and dark acrylic. It can also engrave metal surfaces, but it cannot cut them effectively. The Monport 20W is designed for all metals, including gold, silver, copper, stainless steel, brass, and titanium. It can perform deep metal engraving and some metal sheet cutting. The Monport cannot process wood or acrylic. If you need to work with non-metal materials like wood or leather, the Creality is the only viable option. For metal marking, the Monport is superior.
Working Area
The size of the engraving area affects what you can produce. The Creality Falcon 10W has a large working area of 17 inches by 16 inches. This is approximately 432 mm by 406 mm. It is suitable for larger projects like cutting basswood or engraving leather sheets. The Monport 20W has a much smaller working area of 110 mm by 110 mm. This is about 4.3 inches by 4.3 inches. The Monport’s area is optimized for small metal items like jewelry or tools. The Creality offers a significantly larger canvas for bigger DIY projects.
Engraving Speed
Speed impacts how quickly you can complete jobs. The Creality Falcon 10W has an engraving speed of up to 10,000 mm/m. This unit indicates millimeters per minute. The Monport 20W lists a maximum speed of 10,000 mm/s. This unit indicates millimeters per second. The Monport’s speed is theoretically much higher due to the unit difference and the galvanometer system. However, these speeds apply to different technologies and materials. The Monport’s fiber laser with a customized galvanometer system is designed for rapid marking on small metal areas. The Creality’s speed is sufficient for larger, slower diode engraving tasks.
Which Laser Engraver Suits Your Needs
DIY wood and plastic hobbyists
The Creality Falcon 10W features a 17 by 16 inch working area, providing ample space for larger projects. Its 10W diode laser can cut 5mm basswood or 3mm black acrylic in a single pass. The machine supports Wi-Fi, USB, and SD card transfers, allowing flexible operation with LightBurn or LaserGRBL software for versatile material handling.
Metal marking professionals
The Monport 20W fiber laser is designed specifically for metal engraving, including gold, silver, and stainless steel. It offers a 20W output power with a 110 by 110 mm working area. The system achieves 0.01mm accuracy and speeds up to 10000mm/s, making it ideal for deep engraving and precise industrial marking tasks.
Users needing large workspace
With a 17 by 16 inch bed, the Creality machine accommodates bigger items than the Monport's 4.3 by 4.3 inch area. The 0.06mm laser spot size ensures fine detail on wood, leather, and plastic. Its aluminum structure and steel guide rails provide stability, while the 10W power handles cutting tasks efficiently for larger DIY projects.
The products compared
Creality Falcon 10W Laser Engraver
Best for: large-format DIY craft engraving and light cutting
- Laser Power
- 10W
- Working Area
- 17" x 16"
- Engraving Speed
- Up to 10000mm/m
- Software Compatibility
- LightBurn, LaserGRBL
- Cutting Capacity
- 5mm basswood, 3mm black acrylic
- Compatible Material
- Wood, Metal, Acrylic, Leather, Paper
View on Amazon: Creality Falcon 10W Laser Engraver Affiliate link
The Creality Falcon 10W Laser Engraver gives you an open-frame diode cutter with a 17 by 16-inch work area. It provides 10W of optical output power, cuts up to 5mm basswood in one pass, and engraves at speeds up to 10000 mm/min. If you work on craft projects using wood, leather, or dark acrylic, this unit suits your desktop setup.
Pros
- 17 x 16-inch working area accommodates wide sheet materials
- 10W output power cuts 5mm basswood and 3mm black acrylic in one pass
- Fine 0.06 x 0.06 mm laser spot focus for precise lines
- Connects via Wi-Fi, USB cable, or SD card offline transfer
Cons
- 10W laser output offers lower power than 20W options
- One-pass cutting capacity tops out at 5mm wood and 3mm dark acrylic
Good fit if
- You need a 17 x 16-inch workspace for cutting and etching craft panels.
- You want wireless and offline job transfers via Wi-Fi or SD card.
Skip if
- You need more than 10W of laser output for slicing dense lumber.
- You plan to engrave bare metals that require a fiber laser.
Verdict: Creality Falcon 10W Laser Engraver fits DIY hobbyists who need a broad 17 by 16-inch workspace for surface etching and light wood cutting.
Monport 20W Fiber Laser Engraver
Best for: small metal engraving and marking
- Laser Type
- Fiber
- Laser Power
- 20W
- Working Area
- 110 x 110 mm
- Engraving Speed
- Up to 10000 mm/s
- Software Compatibility
- LightBurn, BSLcad
- Compatible Material
- Metal
View on Amazon: Monport 20W Fiber Laser Engraver Affiliate link
This Monport fiber laser engraver delivers 20W of output power for marking metals like gold, silver, and stainless steel. It features a 110 x 110 mm working area and reaches speeds up to 10000mm/s. The system uses a customized galvanometer and F-theta mirror for 0.01mm accuracy. It works with LightBurn software and includes a red dot pointer for precise placement. This compact unit is designed for deep metal engraving and light sheet cutting.
Pros
- 20W fiber laser output for metal marking
- Engraving speed up to 10000mm/s
- 0.01mm carving accuracy with F-theta mirror
- Compatible with LightBurn software
- Includes red dot pointer for positioning
Cons
- Limited to 110 x 110 mm working area
- Designed primarily for metal materials
- Smaller capacity compared to larger diode or CO2 systems
Good fit if
- You need to engrave or mark various metals
- You require high-speed marking for small items
- You prefer using LightBurn software for control
Skip if
- You need to engrave wood or acrylic
- You require a large working area for big projects
- You want to cut thick materials
Verdict: Monport 20W Fiber Laser Engraver is a compact, high-speed tool for metal marking. It suits users who need precise, fast engraving on small metal items and do not require large workspaces.
Specifications side by side
| Spec | Creality Falcon 10W Laser Engraver | Monport 20W Fiber Laser Engraver |
|---|---|---|
| Laser Type | not stated | Fiber |
| Laser Power | 10W | 20W |
| Working Area | 17" x 16" | 110 x 110 mm |
| Engraving Speed | Up to 10000mm/m | Up to 10000 mm/s |
| Software Compatibility | LightBurn, LaserGRBL | LightBurn, BSLcad |
| Cutting Capacity | 5mm basswood, 3mm black acrylic | not stated |
| Compatible Material | Wood, Metal, Acrylic, Leather, Paper | Metal |
| Form Factor | Desktop | not stated |
| Dimensions | 22.4 × 24.9 × 7.79 inches | not stated |
| Weight | 7.05 pounds | not stated |
| Size | Falcon-10W Basic | 20W+Lightburn |
| Color | Falcon-10W Basic | Grey |
| Model | CR-Laser Falcon 10W | XYF30 |
Frequently asked questions
Is the Creality Falcon 10W better for wood or metal?
The Creality Falcon 10W is better for wood and acrylic. It uses a 10W diode laser that cuts thin wood and engraves plastic effectively. While it lists metal as a compatible material, diode lasers typically only mark surface coatings on metal rather than engraving deep into the material itself. It is designed for DIY users who prioritize cutting speed on softer materials.
Can the Monport 20W engrave on wood?
The Monport 20W is not designed for wood. Its specifications list metal as the only compatible material. This machine uses a fiber laser, which is specialized for marking metals like stainless steel, aluminum, and brass. It is a compact tool for small metal items and does not support organic materials like wood or acrylic.
What is the working area of the Creality Falcon 10W?
The Creality Falcon 10W has a working area of 17 by 16 inches. The overall machine dimensions are 24.9 inches wide, 22.4 inches long, and 7.79 inches high. It weighs 7.05 pounds, making it a relatively portable option for hobbyists. This size provides ample space for larger DIY projects compared to smaller desktop engravers.
Does the Monport 20W come with software?
Yes, the Monport 20W includes LightBurn software. The product listing specifies the size as 20W plus LightBurn, indicating the software is bundled with the unit. LightBurn is a popular control program that allows you to manage designs and laser settings efficiently. This compatibility ensures you have professional-grade control over your metal marking projects.
Which machine is lighter to move around?
The Creality Falcon 10W is lighter, weighing 7.05 pounds. The Monport 20W does not list a specific weight in the provided data. The Creality model is designed for DIY users who may need to move the unit or adjust its position frequently. Its compact form factor supports this portability requirement.
Is the Monport 20W suitable for large projects?
No, the Monport 20W is not suitable for large projects. It is described as a compact, high-speed tool for small metal items. The working area is limited, making it ideal for precise marking on jewelry or small parts. If you need to engrave larger surfaces, this machine does not provide the necessary workspace.
Can I use LightBurn with the Creality Falcon 10W?
Yes, the Creality Falcon 10W is compatible with LightBurn software. This allows you to use advanced design features and control settings beyond the basic interface. Compatibility with LightBurn ensures you have flexibility in your workflow, whether you are engraving wood, acrylic, or leather. It is a practical choice for users who want software versatility.