xTool or ComMarker? Laser Engravers Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This xTool vs ComMarker laser engraver comparison looks at two distinct machines for different tasks. Both are Class 1 safety devices, but they use different laser technologies. The xTool M2 uses a diode laser for wood and leather, while the ComMarker B6 uses a fiber laser for metal. You need to choose based on whether you prioritize color printing or permanent metal marking. These specs help you decide which tool fits your workshop.
Key differences
| Aspect | xTool M2 20W Enclosed Laser Engraver | ComMarker 30W Fiber Laser Engraver |
|---|---|---|
| Laser Type | Diode | Fiber (1064nm) |
| Laser Power | 20W | 30W |
| Compatible Material | Wood, Leather, Paper, Fabric | Metal, Jewelry, Plastic |
| Form Factor | Class 1 Enclosed | Portable |
| Features | Enclosure, Camera | Auto Focus |
| Software Compatibility | xTool Studio | Lightburn, EzCad2 |
Which one should you choose?
Choose xTool M2 20W Enclosed Laser Engraver if
- You want to engrave wood, leather, or paper with high precision.
- You need a fully enclosed machine for safe home use.
- You plan to add a CMYK inkjet module for full-color printing.
Choose ComMarker 30W Fiber Laser Engraver if
- You need to mark stainless steel, aluminum, or jewelry.
- You require a portable unit that weighs only 13kg.
- You prefer using Lightburn or EzCad2 software for metal marking.
Verdict: Choose the xTool M2 if you focus on DIY crafts, wood, and leather in a home setting. Pick the ComMarker B6 if your work involves permanent metal marking and you need a portable, desktop-friendly device. The choice depends entirely on whether your primary material is organic or metallic.
xTool M2 vs ComMarker B6
Laser Type
The xTool M2 uses a 20W diode laser, which is ideal for organic materials like wood, leather, and paper. It works well for hobbyists who engrave on surfaces that absorb light. The ComMarker B6 features a 30W fiber laser source with a 1064nm wavelength. This technology is designed specifically for marking metals like stainless steel, aluminum, and gold. Fiber lasers also handle non-transparent plastics effectively. You must choose based on your primary material. If you work with wood, the diode is better. If you mark metal, the fiber is required.
Laser Power
Power ratings differ between these two machines. The xTool M2 is listed with 20W (20000mW) of laser output power. This provides sufficient energy for cutting thicker wood and engraving various crafts. The ComMarker B6 offers 30W of power. However, fiber lasers operate differently than diode lasers. The higher wattage on the ComMarker helps with faster marking speeds and deeper engraving on metals. For diode applications, the M2’s 20W is competitive. For metal marking, the ComMarker’s 30W gives it an advantage in speed and efficiency. You should check the specific power needs of your projects.
Compatible Material
Material compatibility is the biggest differentiator here. The xTool M2 handles wood, leather, paper, and fabric. It can also add a CMYK inkjet module for full-color printing on cardstock and other surfaces. It cannot engrave bare metal. The ComMarker B6 focuses on metals such as stainless steel, aluminum, gold, and silver. It also marks painted products and non-transparent plastics. It does not work well on wood or leather. If you need to create jewelry or industrial parts, the ComMarker is the only choice. For home decor and crafts, the xTool is the correct tool.
Features
The xTool M2 includes built-in dual cameras for real-time workspace preview. This supports a Place & Go workflow, improving accuracy by fusing vision with motion control. It also features a fully enclosed Class 1 design for safety. The ComMarker B6 includes a touch screen for auto focus. It is compact and portable, weighing only 13kg. It comes with a foot switch for hands-free operation. The M2 offers advanced software integration and safety through enclosure. The ComMarker offers physical convenience with portability and manual controls. Both have distinct feature sets for different workflows.
Software Compatibility
Software options vary significantly. The xTool M2 uses xTool Studio, which offers customizable templates and an integrated AI image generator. It is designed for beginners with a gentle learning curve. The ComMarker B6 supports LightBurn and EzCad2. LightBurn is a popular third-party software for diode and fiber lasers, offering advanced control. EzCad2 is standard for fiber marking. If you prefer specialized metal marking software, the ComMarker wins. If you want an all-in-one beginner-friendly ecosystem, the xTool is better. Check which software you already know or prefer to use.
Form Factor
The physical design impacts where you can use the machine. The xTool M2 is a Class 1 enclosed laser engraver. It is a stationary desktop unit designed for safe, contained operation. The ComMarker B6 is described as a portable laser engraver for desktop and tabletop use. It is compact and weighs 13kg, making it easy to move. It does not have a large enclosure like the M2. You need to consider your workspace. If you need a safe, contained unit for home use, choose the M2. If you need a lightweight, movable tool for a workshop, choose the ComMarker.
Choose the right laser for you
DIY creators who want safety
The xTool M2 is a Class 1 enclosed diode laser. Its 20W power handles wood, leather, and paper. The built-in dual cameras help with accuracy. You get a safe, enclosed design for home use. The software includes templates. This machine suits beginners who want a plug-and-play experience without worrying about laser exposure.
Metal marking professionals
The ComMarker B6 uses a 30W fiber laser. It works at 15,000mm/s for fast marking on stainless steel and aluminum. The 1064nm wavelength targets metals and hard plastics. It supports LightBurn software. The compact 150mm x 150mm area fits on a desk. This tool is built for industrial-style metal engraving and jewelry marking.
Users needing portable metal engraving
The ComMarker B6 weighs only 13kg and includes a foot switch. It connects via Type-C and supports Windows and Mac. The auto-focus screen simplifies setup. This portable fiber laser is ideal for on-the-go metal marking. You get a complete kit with accessories. It is a lightweight solution for quick metal identification tasks.
The products compared
xTool M2 20W Enclosed Laser Engraver
Best for: DIY home crafting with safety
- Laser Type
- Diode
- Laser Power
- 20W (20000mW)
- Software Compatibility
- xTool Studio
- Form Factor
- Fully enclosed Class 1
- Compatible Material
- Wood, Leather, Paper, Fabric
- Features
- Enclosure, Camera
View on Amazon: xTool M2 20W Enclosed Laser Engraver Affiliate link
The xTool M2 is a Class 1 enclosed laser engraver with a 20W diode laser. It features built-in dual cameras for real-time preview and precise motion control. The system runs on xTool Studio software, which includes customizable templates and AI image generation. This setup is designed for DIY makers who want a safe, enclosed machine for home crafting. It handles materials like wood, leather, and fabric with ease.
Pros
- Class 1 enclosed safety design
- 20W (20000mW) diode laser power
- Built-in dual cameras for placement
- xTool Studio with AI image generator
- Real-time workspace preview
Cons
- CMYK Inkjet module sold separately
- 3W IR laser module sold separately
- RA3 Lite Rotary sold separately
Good fit if
- You want a Class 1 enclosed machine
- You need precise camera-guided placement
- You prefer beginner-friendly software templates
Skip if
- You need full-color printing included
- You want metal engraving capability built-in
- You require rotary attachment included
Verdict: The xTool M2 20W Diode Engraver fits DIY makers who value safety and precision. Its enclosed design and dual cameras make it ideal for home crafting without the learning curve.
ComMarker 30W Fiber Laser Engraver
Best for: portable metal marking and jewelry engraving
- Laser Type
- Fiber (1064nm)
- Laser Power
- 30W
- Working Area
- 150mm x 150mm
- Engraving Speed
- 15,000mm/s
- Software Compatibility
- Lightburn, EzCad2
- Compatible Material
- Metal, Jewelry, Plastic
View on Amazon: ComMarker 30W Fiber Laser Engraver Affiliate link
The ComMarker B6 is a 30W fiber laser engraver designed for metal marking. It features a 150mm x 150mm working area and reaches speeds of 15,000mm/s. The unit includes auto focus via a touch screen and supports Lightburn software. Weighing 13kg, it offers a compact, portable form factor for desktop use. This machine suits users who need precise, high-speed marking on metals and jewelry.
Pros
- 30W JPT M7 fiber laser source for fast marking
- Engraving speed up to 15,000mm/s
- Auto focus with integrated touch screen
- Compatible with Lightburn and EzCad2 software
- Compact 13kg portable design
Cons
- Limited 150mm x 150mm working area
- Requires separate computer for Lightburn operation
- No built-in camera for real-time preview
Good fit if
- You primarily engrave metals, jewelry, or hard plastics
- You need a compact machine for limited desk space
- You prefer using Lightburn software for design control
Skip if
- You need to engrave wood or acrylic
- You require a large working area over 150mm
- You want a fully enclosed safety class 1 system
Verdict: The ComMarker B6 30W Portable Fiber Engraver delivers high-speed metal marking in a small footprint. It fits users who need portable, precise fiber laser capabilities for jewelry or metal parts.
Specifications side by side
| Spec | xTool M2 20W Enclosed Laser Engraver | ComMarker 30W Fiber Laser Engraver |
|---|---|---|
| Laser Type | Diode | Fiber (1064nm) |
| Laser Power | 20W (20000mW) | 30W |
| Working Area | not stated | 150mm x 150mm |
| Engraving Speed | not stated | 15,000mm/s |
| Software Compatibility | xTool Studio | Lightburn, EzCad2 |
| Form Factor | Fully enclosed Class 1 | not stated |
| Compatible Material | Wood, Leather, Paper, Fabric | Metal, Jewelry, Plastic |
| Features | Enclosure, Camera | Auto Focus |
| Target Audience | DIY | not stated |
| Size | 20W | not stated |
| Dimensions | not stated | 12 × 28 × 10 inches |
| Color | M2 Basic | B6 30w |
| Model | MLM-K610-001 | B6 |
Frequently asked questions
Which machine is better for engraving on wood and leather?
The xTool M2 is the better choice for organic materials. It uses a 20W diode laser that works well with wood, leather, paper, and fabric. The enclosed design provides safety while you craft. This makes it ideal for DIY home projects where you need precision without exposure to open beams.
Can I engrave metal with the xTool M2?
No, the xTool M2 is not designed for metal. Its 20W diode laser is compatible only with wood, leather, paper, and fabric. If you need to mark metal or jewelry, you should look at the ComMarker B6, which uses a fiber laser specifically built for those hard surfaces.
Is the ComMarker B6 portable?
Yes, the ComMarker B6 is a portable fiber laser engraver. It has a compact form factor with dimensions of 12 inches in length, 10 inches in height, and 28 inches in width. This small footprint allows you to move it easily, making it great for jewelry engraving or marking small metal parts on the go.
Does the ComMarker B6 support LightBurn software?
Yes, the ComMarker B6 is compatible with LightBurn software. This allows you to design and control your engravings using a familiar interface. The fiber laser delivers high-speed metal marking, and the auto-focus feature helps ensure precision. This combination makes it suitable for users who need portable and precise capabilities for metal parts.
Which laser engraver is safer for home use?
The xTool M2 is safer for home environments due to its enclosed design. It is a Class 1 device, meaning the laser beam is contained within the machine. The dual cameras help with accuracy without requiring you to open the unit. This makes it ideal for DIY makers who value safety while working on crafts.
What is the difference between diode and fiber lasers?
Diode lasers, like the one in the xTool M2, are best for organic materials such as wood, leather, and paper. Fiber lasers, like the 30W unit in the ComMarker B6, are designed for metals, jewelry, and certain plastics. The ComMarker offers high-speed marking for hard surfaces, while the xTool focuses on precision for softer materials.
Does the xTool M2 have cameras for positioning?
Yes, the xTool M2 features dual cameras. These help you position your designs accurately on the material. The enclosed design keeps the laser safe while the cameras assist with alignment. This setup is ideal for DIY home crafting, as it reduces the learning curve and improves precision for wood, leather, and paper projects.