xTool SafetyPro AP2 Smoke Purifier vs xTool S1 40W Diode Laser: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This xtool safetypro ap2 smoke purifier vs s1 40w diode laser comparison highlights two distinct xTool products. One manages air quality while the other provides cutting power. They serve different roles in a workshop. The AP2 filters dust and odors from laser processing. The S1 module delivers high-power diode laser output for cutting thick materials. You need both for a complete setup, but they solve separate problems. This guide breaks down their specifications to help you decide which component fits your current needs.
Key differences
| Aspect | xTool SafetyPro AP2 Smoke Purifier | xTool S1 40W Diode Laser Module |
|---|---|---|
| Laser Type | Not listed | Diode |
| Laser Power | Not listed | 40W (40000mW) |
| Function | Smoke purification and dust removal | Material cutting and engraving |
| Filtration System | 6-layer SuperCyclone with 36 cyclones | Not listed |
| Engraving Speed | Not listed | 600mm/s |
| Weight | 46.1 pounds | Not listed |
Which one should you choose?
Choose xTool SafetyPro AP2 Smoke Purifier if
- You need to remove dust and odors from your workspace during laser processing.
- You want a filtration system that syncs automatically with xTool lasers for tailored settings.
- You require a unit with 6-layer filtration to capture 99.99% of particles.
Choose xTool S1 40W Diode Laser Module if
- You need to cut materials up to 18mm thick in a single pass.
- You want a high-speed laser module capable of reaching 600mm/s engraving speeds.
- You are upgrading an existing xTool S1 engraver to handle thicker wood or acrylic.
Verdict: The xTool SafetyPro AP2 is essential for maintaining air quality and protecting your health during operation. The xTool S1 40W Diode Laser Module is necessary if you require significant cutting power for thick materials. These products complement each other rather than compete, as one handles safety and the other handles fabrication.
Air Purifier vs Laser Module Specs
Product Function
The xTool SafetyPro AP2 Smoke Purifier is an air quality management system designed to protect your workspace. It uses a 6-layer filtration system to remove 99.99% of dust and odors. Its SuperCyclone technology captures large particles before they reach the filters. The xTool S1 40W Diode Laser Module is a cutting component. It provides the actual laser energy for engraving and cutting materials. It is not an air filter. One product cleans the air, while the other performs the physical work on your materials. They serve entirely different roles in a laser setup.
Laser Type
The laser type defines the technology used for processing materials. The xTool S1 40W Diode Laser Module uses diode laser technology. This is standard for high-speed engraving and cutting on non-metals and some metals. The xTool SafetyPro AP2 Smoke Purifier is not a laser engraver. Its attributes list Fiber as the laser type, which likely refers to its compatibility or internal sensor technology rather than a cutting beam. It does not emit a laser for cutting. The S1 is the active laser tool, while the AP2 is a passive safety accessory. They cannot be compared as direct cutting alternatives.
Laser Power
Power determines how thick or dense a material can be cut in a single pass. The xTool S1 40W Diode Laser Module delivers 40W of laser power, which equals 40,000mW. This high output allows it to slice through 18mm cherry wood and 15mm dark opaque acrylic in one pass. It can also cut 0.1mm stainless steel. The xTool SafetyPro AP2 Smoke Purifier does not have a laser power rating. It does not cut or engrave. It has no cutting capacity. The S1 is the only product here capable of material removal through laser energy.
Filtration Efficiency
Air purification is the core strength of the xTool SafetyPro AP2 Smoke Purifier. It features a 6-layer filtration system, including an Ultra-Dense Carbon Mesh filter to absorb odors and harmful chemicals. The SuperCyclone System uses 36 cyclones to capture 99% of large particles before they clog the filters. This extends filter life by 10X. The xTool S1 40W Diode Laser Module has no filtration system. It produces dust and smoke but does not clean the air. The AP2 is the superior choice for air quality, while the S1 offers no air cleaning capabilities.
Physical Size
Space requirements differ significantly between these two devices. The xTool SafetyPro AP2 Smoke Purifier is a large unit measuring 25.6 inches in length, 16.1 inches in width, and 26.4 inches in height. It weighs 46.1 pounds. The xTool S1 40W Diode Laser Module is a compact component. It measures 12.2 inches in length, 7.48 inches in width, and 13 inches in height. It does not list a weight, but it is a module head. The AP2 is a substantial standalone appliance, while the S1 is a smaller part that attaches to a larger machine.
Compatible Materials
Each product interacts with materials differently. The xTool S1 40W Diode Laser Module cuts and engraves wood, acrylic, and thin metals. It specifically handles 18mm cherry wood, 15mm acrylic, and 0.1mm stainless steel. The xTool SafetyPro AP2 Smoke Purifier does not process materials directly. It filters the air created by processing various materials, including wood, acrylic, and plastics, in compatible laser machines. It is compatible with diode and CO2 lasers with fume extraction under 150 m³/h. The S1 processes the material, while the AP2 cleans the environment around it.
Speed and Performance
Performance metrics highlight the operational differences. The xTool S1 40W Diode Laser Module boasts an engraving speed of up to 600mm/s. This high speed allows for rapid processing of designs and cuts. The xTool SafetyPro AP2 Smoke Purifier does not have an engraving speed. It focuses on airflow and filtration rates. It operates at low-dB levels and syncs automatically with xTool lasers to tailor settings. The S1 is measured by how fast it marks material, while the AP2 is measured by how effectively it cleans the air during that process.
Which xTool product fits your needs?
Users needing air quality management
The AP2 Smoke Purifier handles 150 m³/h extraction. Its 6-layer system removes 99.99% of dust and odors. SuperCyclone technology captures large particles first. This protects your lungs and keeps your workspace clean during long engraving sessions. It syncs automatically with compatible lasers for efficient operation.
Users needing high power cutting
The S1 40W Diode Laser Module delivers 40,000mW of power. It cuts 18mm cherry wood and 15mm acrylic in one pass. Speeds reach 600mm/s for fast processing. This module upgrades your existing S1 engraver without buying a new machine. It is ideal for thick material cutting tasks.
Users upgrading existing laser setups
You can replace your current laser head with this 40W module. It eliminates the need for a second machine, saving space and cost. The high power allows cutting through 0.1mm stainless steel and thick woods. This upgrade maximizes your existing S1 engraver capabilities for more demanding projects.
The products compared
xTool SafetyPro AP2 Smoke Purifier
Best for: xTool laser users needing air purification
- Laser Type
- Fiber
- Dimensions
- 25.6 × 16.1 × 26.4 inches
- Weight
- 46.1 pounds
View on Amazon: xTool SafetyPro AP2 Smoke Purifier Affiliate link
The xTool SafetyPro AP2 is a smoke purifier designed for laser engravers. It features a 6-layer filtration system with SuperCyclone technology to remove 99.99% of dust and odors. The unit weighs 46.1 pounds and measures 25.6 by 16.1 by 26.4 inches. It syncs with xTool lasers and supports machines with fume extraction of 150 m³/h or less. This purifier suits users seeking cleaner air during processing.
Pros
- 6-layer filtration removes 99.99% of dust and odors
- SuperCyclone technology captures 99% of large particles
- Auto syncs with xTool lasers for tailored settings
- Low-dB operation ensures quieter performance
Cons
- Heavy build at 46.1 pounds
- Large footprint measuring 25.6 inches long
- Incompatible with xTool P3 due to high fume extraction
Good fit if
- You use xTool laser engravers or CO2 cutters
- You need effective dust and odor removal
- You want auto-synced filtration settings
Skip if
- You use the xTool P3 laser
- You have limited floor space
- You prefer a lightweight unit
Verdict: The xTool SafetyPro AP2 Smoke Purifier delivers robust filtration for xTool users. It fits those prioritizing air quality and automated control over portability.
xTool S1 40W Diode Laser Module
Best for: Upgrading existing xTool S1 engravers
- Laser Type
- Diode
- Laser Power
- 40W (40000mW)
- Engraving Speed
- 600mm/s
- Cutting Capacity
- 18mm cherry wood, 15mm acrylic
- Dimensions
- 12.2 × 7.48 × 13 inches
View on Amazon: xTool S1 40W Diode Laser Module Affiliate link
This 40W diode laser module is designed exclusively for the xTool S1 engraver. It delivers a laser output of 40,000 mW, enabling speeds up to 600mm/s. You can cut materials like 18mm cherry wood and 15mm dark opaque acrylic in a single pass. The unit measures 12.2 by 7.48 by 13 inches. It allows you to upgrade your existing machine by simply replacing the laser head.
Pros
- 40W (40000mW) laser power for high-efficiency cutting
- Engraving speed reaches 600mm/s
- Cuts 18mm cherry wood in one pass
- Compatible with 15mm dark opaque acrylic
Cons
- Compatible with S1 Laser Engraver Only
- Gold color finish may not match all setups
- No app control mentioned in specifications
Good fit if
- You already own an xTool S1 engraver
- You need to cut wood up to 18mm thick
- You want to upgrade your current laser head
Skip if
- You do not own an xTool S1 machine
- You require a laser module for other brands
- You need to cut stainless steel thicker than 0.1mm
Verdict: xTool S1 40W Diode Laser Module is a powerful upgrade for existing S1 owners who need to cut thicker wood. It fits users who want faster speeds and higher power without buying a new machine.
Specifications side by side
| Spec | xTool SafetyPro AP2 Smoke Purifier | xTool S1 40W Diode Laser Module |
|---|---|---|
| Laser Type | not stated | Diode |
| Laser Power | not stated | 40W (40000mW) |
| Engraving Speed | not stated | 600mm/s |
| Cutting Capacity | not stated | 18mm cherry wood, 15mm acrylic |
| Compatible Material | not stated | Wood |
| Dimensions | 25.6 × 16.1 × 26.4 inches | 12.2 × 7.48 × 13 inches |
| Weight | 46.1 pounds | not stated |
| Size | 290*491*542mm | 40W Diode |
| Color | White+Black | gold |
| Model | MAX-S300-P01 | P5010330 |
Frequently asked questions
Can the xTool SafetyPro AP2 purify air for the S1 laser?
Yes, the AP2 is designed to work with xTool laser users. It provides robust filtration to manage air quality during operation. This helps remove dust and odors generated by the S1 diode laser. It fits users prioritizing air quality over portability.
What are the physical dimensions of the AP2 smoke purifier?
The xTool SafetyPro AP2 measures 16.1 inches in width, 26.4 inches in height, and 25.6 inches in length. It weighs 46.1 pounds. These dimensions indicate it is a substantial unit for a workshop, prioritizing filtration capacity over compact portability.
Does the S1 module include a laser source or just the part?
The S1 is a 40W Diode Laser Module intended for upgrading existing xTool S1 engravers. It is not a complete machine. It serves as a powerful upgrade for owners needing to cut thicker wood with faster speeds and higher power.
What is the weight of the xTool S1 laser module?
The provided data does not list a specific weight for the xTool S1 40W Diode Laser Module. It only provides its dimensions as 7.48 inches in width, 13 inches in height, and 12.2 inches in length. The color is noted as gold.
Is the AP2 suitable for fiber laser applications?
The data lists the laser type for the AP2 as Fiber. This suggests it is compatible with or designed for fiber laser environments. It delivers robust filtration for users needing air purification, fitting those who prioritize air quality and automated control.
What model number identifies the S1 laser module?
The xTool S1 40W Diode Laser Module carries the model number P5010330. It is designed for users upgrading existing S1 engravers. It allows for cutting thicker wood without purchasing an entirely new machine, offering higher power and faster speeds.