OMTech vs VEVOR: Laser Engravers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This OMTech vs VEVOR laser engraver comparison highlights two very different tools. One is a consumable spray for marking metal, while the other is a large-format cutting machine. You need to know which fits your workflow. The spray helps you mark metals like aluminum and steel with high contrast. The machine cuts wood and acrylic with a powerful beam. We compare their specs to help you decide.
Key differences
| Aspect | OMTech 13 oz Metal Laser Marking Spray 3-Pack | VEVOR 100W 24 x 35 in CO2 Laser Engraver |
|---|---|---|
| Product Type | Laser marking spray | CO2 laser engraver machine |
| Laser Power | Not listed | 100W |
| Compatible Material | Metal | Wood, Acrylic, Fabric, Non-metallics |
| Working Area | Not listed | 24 x 35 in |
| Software Compatibility | Not listed | LightBurn, CorelDRAW, AutoCAD |
Which one should you choose?
Choose OMTech 13 oz Metal Laser Marking Spray 3-Pack if
- You need to mark bare metals like stainless steel or aluminum.
- You already own a CO2 or fiber laser and need marking fluid.
- You want a quick, washable solution for serializing tools.
Choose VEVOR 100W 24 x 35 in CO2 Laser Engraver if
- You need to cut thick wood or acrylic sheets.
- You require a large 24 x 35 inch working area.
- You want a standalone machine with air assist and wheels.
Verdict: Choose the OMTech spray if you only need to mark metal surfaces on items you already own a laser for. Pick the VEVOR machine if you need a powerful, large-format cutter for wood and acrylic. They serve completely different roles in a laser workflow.
OMTech Spray vs VEVOR Machine Specs
Laser type
Both products rely on CO2 technology, but they serve entirely different roles in your setup. The VEVOR unit is a 100W CO2 laser engraver and cutter designed for direct processing. It uses its own laser source to cut and mark materials. The OMTech product is not a laser machine. It is a marking spray that works with most CO2 lasers. You apply the spray to metal, then use your existing CO2 laser to create high-contrast black marks. One is the tool; the other is a consumable accessory that enhances the output of that tool. They are not competitors but rather complementary items.
Laser power
Power specifications reveal the functional gap between these two items. The VEVOR machine delivers 100W of laser power. This output allows it to cut materials up to 0.59 inches thick in a single pass. It also engraves at speeds up to 19.7 ips. The OMTech spray has no laser power of its own. It is a chemical agent that reacts to laser energy. Its effectiveness depends on the power of the CO2 laser you use with it. The data notes it works with 25W and above CO2 lasers. You cannot compare the spray to the machine on raw power. The VEVOR provides the energy; the OMTech product utilizes it.
Compatible material
Material compatibility defines what you can actually process with each item. The VEVOR laser works on wood, acrylic, cardboard, glass, leather, stone, and over 1000 non-metallic materials. It also cuts metal when used with marking spray. The OMTech spray is specifically designed for bare metals like aluminum, stainless steel, and brass. It creates permanent black designs on these surfaces. Without the spray, the VEVOR cannot mark bare metal effectively with a CO2 source. The spray extends the VEVOR’s capabilities into metalworking. You need the VEVOR for non-metals and the spray for metals.
Form factor
The physical size and weight of these items are vastly different. The VEVOR is a large industrial machine. It measures 64.6 inches in length, 39.4 inches in width, and 39.4 inches in height. It weighs 551 pounds. It features a 24 x 35 inch working area and movable wheels for positioning. The OMTech spray is small and portable. The can is 7.9 inches high and 2.6 inches in diameter. It comes in packs of three. You can store the spray easily in a drawer. The VEVOR requires a dedicated workspace. The spray is a small addition to your existing setup.
Software compatibility
Control methods differ significantly between the hardware and the consumable. The VEVOR machine features a digital control panel. It connects via USB disk, USB cable, or network cable. It is compatible with Windows, Linux, and macOS. It works with third-party software like LightBurn, CorelDRAW, and AutoCAD. The OMTech spray requires no software. It is a manual application process. You spray the can onto the metal surface, let it dry, and then run your laser file. The VEVOR handles the digital workflow. The OMTech product is a physical step in the material preparation phase.
Which OMTech or VEVOR fits your needs
Metal jewelry or tumbler customizers
You need high-contrast black marks on bare metals like aluminum and stainless steel. This 13 oz spray dries in under five minutes. It works with 25W and above CO2 lasers. The fine-grained formula creates even coats. Excess spray washes off easily. This allows you to serialize tools or personalize items quickly without modifying the machine itself.
Large format wood or acrylic cutters
You require a spacious 24 by 35 inch working area for big projects. This 100W CO2 machine cuts up to 0.59 inches thick in one pass. It engraves at speeds up to 19.7 ips. The intelligent laser head ensures smooth incisions. Air assist removes smoke and dust. The honeycomb bed provides stability for heavy materials like wood and acrylic.
Users needing versatile software integration
You want to use familiar design programs like LightBurn, CorelDRAW, or AutoCAD. This machine connects via USB disk, cable, or network. It supports Windows, Linux, and macOS. The digital control panel simplifies file transfer. The red-dot pointer helps frame your project size accurately. This flexibility lets you integrate the engraver into your existing digital workflow seamlessly.
The products compared
OMTech 13 oz Metal Laser Marking Spray 3-Pack
Best for: CO2 laser metal marking with black contrast
- Laser Type
- Diode
- Compatible Material
- Metal, Aluminum
- Dimensions
- 2.6 × 2.6 × 7.9 inches
View on Amazon: OMTech 13 oz Metal Laser Marking Spray 3-Pack Affiliate link
This is a three-pack of OMTech laser marking spray designed for CO2 lasers. Each 13 oz can applies a thin, even coat that turns black after engraving. It dries in under five minutes, or two with a blower. The formula works on bare metals like aluminum and stainless steel. You get high-contrast, permanent marks on jewelry, tools, or tumblers. The clog-proof nozzle ensures smooth application for batch production.
Pros
- Dries in under 5 minutes naturally
- Creates high-contrast black marks on bare metals
- Clog-proof nozzle for even coating
- Excess spray washes off easily
Cons
- Requires a CO2 laser of 25W or higher
- Only suitable for bare metal surfaces
- Initial white appearance before engraving
Good fit if
- You need permanent black marks on metal
- You own a 25W or higher CO2 laser
- You want fast drying times for batch work
Skip if
- You only use fiber lasers
- You engrave wood or acrylic
- You prefer red marking colors
Verdict: OMTech 3-Pack Black Laser Marking Spray is a practical solution for CO2 laser users marking bare metals. It fits those who need durable, high-contrast black designs on items like jewelry or tools.
VEVOR 100W 24 x 35 in CO2 Laser Engraver
Best for: large format cutting and heavy-duty engraving
- Laser Type
- CO2
- Laser Power
- 100W
- Working Area
- 24 x 35 in (600 x 900 mm)
- Engraving Speed
- Up to 19.7 ips
- Software Compatibility
- LightBurn, CorelDRAW, AutoCAD
- Cutting Capacity
- Up to 0.59 in
View on Amazon: VEVOR 100W 24 x 35 in CO2 Laser Engraver Affiliate link
This VEVOR 100W CO2 laser engraver offers a 24 x 35 inch working area for large projects. It cuts materials up to 0.59 inches thick and engraves at speeds up to 19.7 ips. The machine includes air assist and a digital control panel compatible with LightBurn. It weighs 551 pounds and requires a dedicated workspace due to its size.
Pros
- 100W CO2 laser for precise cutting and engraving
- 24 x 35 inch honeycomb bed for large workpieces
- Air assist system reduces smoke and debris
- Compatible with LightBurn, CorelDRAW, and AutoCAD
Cons
- 551 pounds weight requires permanent setup
- Large 64.6 inch length needs significant floor space
- No built-in Wi-Fi or cloud connectivity listed
Good fit if
- You need a large 24 x 35 inch working area
- You require 100W power for thick material cutting
- You use LightBurn or similar third-party software
Skip if
- You have limited floor space for a 64.6 inch machine
- You need a portable unit under 100 pounds
- You prefer a compact 12 x 20 inch workspace
Verdict: VEVOR 100W CO2 Laser 24x35 in suits users with ample space who need high power for thick materials. It is ideal for workshops prioritizing large format capacity over portability.
Specifications side by side
| Spec | OMTech 13 oz Metal Laser Marking Spray 3-Pack | VEVOR 100W 24 x 35 in CO2 Laser Engraver |
|---|---|---|
| Laser Type | not stated | CO2 |
| Laser Power | not stated | 100W |
| Working Area | not stated | 24 x 35 in (600 x 900 mm) |
| Engraving Speed | not stated | Up to 19.7 ips |
| Software Compatibility | not stated | LightBurn, CorelDRAW, AutoCAD |
| Cutting Capacity | not stated | Up to 0.59 in |
| Compatible Material | Metal, Aluminum | Wood, Acrylic, Fabric |
| Features | not stated | Air Assist |
| Dimensions | 2.6 × 2.6 × 7.9 inches | 64.6 × 39.4 × 39.4 inches |
| Weight | not stated | 551 pounds |
| Size | 3 Pcs | Working Area: 24" x 35" |
| Color | 13 OZ -- Black | Orange |
| Model | RYGEL-USBPW0103 | KH9060 |
Frequently asked questions
Can I use the OMTech spray on my VEVOR laser?
Yes, you can use the OMTech spray with the VEVOR machine. The spray is designed for CO2 lasers, which matches the VEVOR KH9060 laser type. This combination allows you to mark metals like aluminum with high-contrast black designs. The spray is a consumable that enhances the engraving results on bare metals.
What is the working area of the VEVOR laser engraver?
The VEVOR KH9060 offers a large working area of 24 by 35 inches. This size supports heavy-duty engraving and large format cutting tasks. The machine itself measures 64.6 inches in length and 39.4 inches in width. It is built for workshops with ample space rather than portable setups.
Is the VEVOR laser suitable for cutting wood?
Yes, the VEVOR 100W CO2 laser is compatible with wood. It also works with acrylic and fabric materials. The 100W power level helps it cut through thicker materials effectively. This makes it a strong choice for users who need to process multiple material types in their projects.
Does the VEVOR laser come with air assist?
Yes, the VEVOR KH9060 includes air assist as a feature. This function helps blow away debris during engraving and cutting. It improves the quality of the cut and reduces the chance of material catching fire. The air assist is integrated into the machine's design for consistent performance.
What software works with the VEVOR laser engraver?
The VEVOR laser engraver is compatible with LightBurn software. This allows you to control the machine using a familiar interface. LightBurn provides precise control over laser settings and design placement. You can import your designs and adjust parameters directly within the software for accurate results.
How heavy is the VEVOR laser engraver?
The VEVOR KH9060 weighs 551 pounds. This significant weight indicates a sturdy, industrial-grade construction. It is not designed for easy movement or portability. You should ensure your workspace can support this weight and that the machine remains stationary during operation.
What is the OMTech spray used for?
The OMTech 13 oz spray is used for metal laser marking. It creates a durable, high-contrast black design on bare metals. This is ideal for items like jewelry or tools. The spray is a practical solution for CO2 laser users who need to mark metals that are difficult to engrave directly.
Can I engrave directly on metal without the spray?
Direct engraving on bare metals like aluminum is difficult without a marking agent. The OMTech spray provides the necessary contrast for clear marks. While the VEVOR laser can process metal, the spray ensures the design is visible and durable. It is a recommended accessory for metal marking tasks.