OMTech 60W CO2 Laser Engraver Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This omtech 60w co2 laser engraver review covers the OMTech SH-G570 bundle. It is a large-format CO2 machine with 60W of power. The listing includes a water chiller and LightBurn software. These components help manage heat and simplify workflow. The unit offers a 28x20 inch work area. You get a motorized workbed for easy height adjustments. The DC tube provides up to 1,000 hours of usage. This setup targets users needing serious cutting depth and speed. It is designed for consistent performance on nonmetallic materials. The four-way pass-through doors handle large items well.
What stands out
- 60W CO2 laser with 0.4" engraving depth
- 28x20 inch honeycomb and aluminum blade beds
- Included LightBurn software and water chiller
- Motorized autolift workbed for height adjustment
- Four-way pass-through doors for large items
Who it fits
Good fit for
You should consider this machine if you need a large working area for big projects. The 28x20 inch space fits most standard materials. The 60W power allows for deep engraving and fast cutting. If you already use LightBurn, the included software saves setup time. The water chiller helps maintain consistent performance during long runs. The motorized bed reduces manual effort. This bundle suits makers who want a complete, ready-to-use system without buying accessories separately.
Who should skip it
You might want to look elsewhere if you need a portable or small desktop unit. This machine weighs 223 pounds and measures 48.8 inches long. It requires significant floor space. If you do not have a dedicated workshop, the size may be problematic. The CO2 tube requires maintenance and has a limited lifespan. You may need to replace the tube after heavy use. Also, if you prefer diode lasers for metal marking, this CO2 unit is not suitable for metals.
Verdict: This bundle offers a complete, high-power solution for large-format engraving and cutting. The included software and chiller make it a practical choice for serious hobbyists or small businesses.
Key specs explained
Laser Type: CO2
CO2 lasers use a gas mixture to generate light. This type is ideal for nonmetallic materials like wood, glass, and acrylic. It provides clean cuts and detailed engraving. You should choose this if you work with organic or plastic materials. Metal engraving usually requires a fiber laser, so this spec defines your material compatibility.
Laser Power: 60W
This wattage indicates the energy output of the laser tube. Higher power allows for faster cutting through thicker materials. At 60W, you can handle moderate thicknesses in wood and acrylic efficiently. This is a mid-range power level suitable for small businesses or serious hobbyists. Compare this to lower wattages for speed or higher ones for heavy industrial use.
Working Area: 28x20 Inch
The working area defines the maximum size of your project. A 28x20 inch space allows you to engrave or cut large sheets without splitting them. This is a large format, suitable for furniture parts or wide signs. If your projects exceed these dimensions, you will need a larger machine. This size balances capacity with manageable floor space requirements.
Engraving Speed: up to 23.6 ips
This speed measures how fast the laser head moves during engraving. A speed of 23.6 inches per second helps reduce production time for detailed designs. Faster speeds are useful for marking or shallow engraving. Slower speeds may be needed for deep cuts. This spec helps you estimate how long a job will take compared to slower machines.
Design and build overview
The OMTech SH-G570 is a substantial unit. According to the listing, it weighs 223 pounds. Its dimensions are 48.8 inches in length, 34.3 inches in width, and 26.4 inches in height. This footprint requires significant floor space. You need a sturdy surface that can support this mass. The color options listed are black and red. This finish is standard for industrial-grade equipment.
The machine features a honeycomb bed and an aluminum blade bed. These surfaces support your material during cutting and engraving. The working area measures 28 by 20 inches, or 500 by 700 mm. This size accommodates larger projects. The listing notes four-way pass-through doors. This layout allows you to insert long items without removing the entire workpiece. It simplifies the process for extended materials.
Control is simplified by motorized workbeds. You can adjust the height with a button. This autolift feature removes manual guesswork. The unit also includes air assist and a water chiller. These components manage heat and debris. The DC tube provides 60W of power. It is rated for up to 1,000 hours of use. Consistent lower settings can double this lifespan. The design prioritizes durability and ease of use for nonmetallic materials like wood and glass.
Setup and everyday use
You begin setup by connecting the included water chiller. This component manages heat for the DC tube, which the listing states lasts up to 1,000 hours. You install LightBurn software to control the machine. The interface provides intuitive navigation for your projects. The unit weighs 223 pounds, so you need a stable surface. Its dimensions are 48.8 inches long and 34.3 inches wide. You must ensure adequate space for the four-way pass-through doors. These doors allow you to accommodate larger and longer items without removing them from the machine. The honeycomb and aluminum blade beds fit most projects within the 28x20 inch work area. Daily use involves loading your design into LightBurn. You set the speed up to 23.6 inches per second. The motorized autolift feature adjusts the workbed height with a button press. You no longer need manual adjustments for focus. This saves time between jobs. The 60W CO2 laser delivers consistent performance on nonmetallic materials like wood and glass. You can engrave as deep as 0.4 inches. The air assist feature helps clear debris during cutting. You monitor the water chiller to maintain optimal tube temperature. The system doubles its lifespan when used at lower settings. You adjust power levels to suit different material thicknesses. The machine handles large items with ease due to its spacious bed. You position your material on the bed and start the process. The laser cuts or engraves based on your software settings. You remove the finished piece and prepare for the next task. The setup is straightforward if you follow the included components. You rely on the chiller and software for smooth operation.
Before you buy this machine
This bundle includes LightBurn and a water chiller, but you must verify your workspace can handle the 223-pound unit. The 48.8-inch length requires significant floor space and a sturdy table. You need a reliable power source for the DC tube and chiller. Check that your electrical circuit can support the load without tripping breakers. The water chiller demands regular maintenance. You must monitor water levels and quality to prevent tube damage. Distilled water is recommended to avoid mineral buildup. LightBurn software is included, so you do not need to purchase it separately. However, ensure your computer meets the system requirements for running the application. This machine fits best for users who need a large 28x20 inch work area. It suits those who engrave wood, glass, and acrylic frequently. If you only do small projects, a smaller desktop model may be more practical. Consider your material types and volume before committing to this CO2 system.
Check before you buy
- Verify your workspace fits the 48.8-inch length and 223-pound weight.
- Ensure your electrical circuit can handle the chiller and laser load.
- Confirm you have distilled water and space for maintenance.
- Check that your computer runs LightBurn software smoothly.
The product at a glance
OMTech 60W CO2 Laser with Chiller & LightBurn
Best for: Large nonmetallic projects with motorized focus
- Laser Type
- CO2
- Laser Power
- 60W
- Working Area
- 20"x28" (500x700 mm)
- Engraving Speed
- 600 mm/s (23.6 ips)
- Software Compatibility
- LightBurn
- Compatible Material
- Wood, Glass
View on Amazon: OMTech 60W CO2 Laser with Chiller & LightBurn Affiliate link
This OMTech 60W CO2 laser engraver features a 28x20 inch working area and speeds up to 23.6 ips. It includes a water chiller and LightBurn software for consistent performance. The motorized autolift bed simplifies focus adjustments. You get a large workspace with four-way pass-through doors for bigger projects. This machine suits users who need high power and automated height control for nonmetallic materials.
Pros
- 60W CO2 laser tube for deep engraving up to 0.4 inches
- 28x20 inch honeycomb and aluminum blade beds
- Motorized autolift workbed for easy height adjustment
- Includes water chiller and LightBurn software
- Four-way pass-through doors for large items
Cons
- Heavy build at 223 pounds
- Requires water cooling system maintenance
- Limited to nonmetallic materials only
Good fit if
- You need a large 28x20 inch working area
- You want motorized focus adjustments via autolift
- You prefer LightBurn software for control
Skip if
- You require metal engraving capabilities
- You need a compact desktop unit
- You prefer air-cooled laser systems
Verdict: OMTech 60W CO2 Laser Engraver fits users needing a large workspace and motorized focus for nonmetallic projects. The included chiller and software make it ready for immediate use.
Specifications side by side
| Spec | OMTech 60W CO2 Laser with Chiller & LightBurn |
|---|---|
| Laser Type | CO2 |
| Laser Power | 60W |
| Working Area | 20"x28" (500x700 mm) |
| Engraving Speed | 600 mm/s (23.6 ips) |
| Software Compatibility | LightBurn |
| Compatible Material | Wood, Glass |
| Features | Air Assist, Water Chiller |
| Dimensions | 48.8 × 34.3 × 26.4 inches |
| Weight | 223 pounds |
| Size | with LB&Chiller |
| Color | Black, Red |
| Model | SH-G570 |
Frequently asked questions
Can this laser cut metal?
No. The OMTech SH-G570 is a CO2 laser. This type is designed for nonmetallic materials. The listing specifies compatibility with wood and glass. It cannot cut or engrave metals directly. You need a fiber laser for metal work.
What software does it use?
It comes with LightBurn. This software is included in the bundle. It provides intuitive navigation for your designs. You do not need to purchase separate control programs. The interface simplifies workflow for your projects.
Does it need a chiller?
Yes. The listing includes a water chiller. This component manages heat for the DC tube. Proper cooling extends the tube life. The tube lasts up to 1,000 hours with this setup. You must connect it during setup.
How big is the workspace?
The unit measures 48.8 inches in length. It is 34.3 inches wide and 26.4 inches high. The workspace fits large nonmetallic projects. You need a sturdy table to support the 223-pound weight. Ensure your floor space is adequate.
Is air assist included?
Yes. The attributes list air assist as a feature. This function blows air onto the material. It helps clear debris and improves cut quality. You get this feature along with the water chiller in the bundle.
What materials can I engrave?
You can work with wood and glass. CO2 lasers are ideal for these nonmetallic options. The 60W power allows for clean cuts. You can also use acrylic. Avoid metals, as this machine is not designed for them.