Cloudray 80W CO2 Laser Tube Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This cloudray 80w co2 laser tube review covers the CR70 model, a replacement component for CO2 cutter machines and engravers. The tube delivers a maximum power of 80W, ensuring sufficient energy for cutting and engraving tasks. Its physical dimensions are defined by a length of 1250mm and an outer diameter of 55mm. You must verify that your machine has enough installation space to accommodate these specific measurements. The product is designed to fit systems requiring this exact size and power output. It comes pre-connected to simplify your setup process. This guide explains how these specifications impact your workflow and whether this tube matches your current equipment requirements.
What stands out
- Maximum power output of 80W for consistent performance
- 1250mm length and 55mm outer diameter fit specific machine slots
- Pre-connected high voltage and low voltage ports for easier installation
- Nano gold catalyst coating for high quality beam spot concentration
- 4-month warranty covering issues excluding man-made damage
Who it fits
Good fit for
This tube suits users with CO2 engravers or cutters that require an 80W output and have a 1250mm internal space. It is ideal for operators who want to replace a worn tube without dealing with complex wiring, thanks to the pre-connected ports. The nano gold coating and TEM00 mode make it suitable for jobs needing stable, high-energy density spots. You should choose this if your current machine uses a 55mm diameter tube. It is a practical upgrade for maintaining precision in metal and other compatible materials.
Who should skip it
Skip this option if your machine requires a different length or diameter, such as the 720mm or 1000mm variants listed. It is not suitable for systems that cannot accommodate the 1250mm footprint. Buyers needing higher than 80W power should look at the 90-100W 1250mm option instead. Those who cannot verify their installation space beforehand should avoid this purchase. Additionally, if you plan to store the tube for a long time before use, you may experience power attenuation, so buy only when ready to install.
Verdict: The Cloudray CR70 is a spec-driven replacement for 80W CO2 systems with the correct physical dimensions. It offers convenient pre-connection and a coated glass design for stable operation.
Key specs explained for this tube
Laser Type: CO2
This indicates the tube uses carbon dioxide gas to generate the beam. CO2 tubes are standard for non-metal engraving and cutting on materials like wood, acrylic, and leather. You should choose this type if your machine is designed for these common materials. It differs from fiber lasers, which are required for marking metals.
Laser Power: 80W (max 80W)
The maximum output is 80 watts, which determines cutting speed and thickness capacity. Higher power allows you to cut through thicker materials faster. This spec helps you compare replacement tubes to ensure your machine receives sufficient energy. Check your machine manual to confirm it supports this power level without overheating or electrical issues.
size: 60-80W 1250mm
This specifies the physical length is 1250mm, fitting tubes in the 60 to 80W range. You must measure your existing tube or machine slot before buying. If the space is too small, the new tube will not fit. This dimension is critical for ensuring the replacement fits your specific cutter or engraver chassis correctly.
model: CR70
This is the specific manufacturer model identifier for this Cloudray tube. Use this code when checking compatibility with your machine parts or searching for replacement cables. It ensures you order the exact variant designed for your setup. Matching the model number helps avoid confusion with similar-looking tubes that may have different electrical or physical requirements.
Design and Build Quality
The Cloudray CR70 tube is a glass component designed for CO2 laser systems. According to the listing, the outer diameter is 55mm and the total length is 1250mm. This size profile requires you to verify that your machine has adequate internal space. The tube must fit within the available installation area, leaving a small margin for safe handling and mounting. You should measure your current setup before purchasing to ensure compatibility.
The listing notes that the high voltage end and low voltage port come pre-connected. This layout simplifies installation by reducing the number of loose components you need to manage. The tube features a nano gold catalyst coating on the interior. This coating helps produce a TEM00 mode beam, which offers high energy density and a stable spot. These optical characteristics support precise cutting and engraving performance.
Cloudray uses a unique glass-to-metal sealing technology in this build. This construction method aims to extend the service life of the tube compared to standard seals. The product is classified as a consumable item. The listing advises purchasing only when you are ready to install it, as prolonged storage can lead to power attenuation. Each unit undergoes testing before shipping to ensure it meets the specified 80W maximum output. This approach helps maintain consistent performance from the start of your project.
Setup and daily operation notes
Installation is simplified by the pre-connected cables on this Cloudray tube. The listing notes that both the high voltage end and low voltage port come attached. You also receive the necessary high voltage connector. This design reduces the number of loose parts you must handle during assembly. Before you begin, you must verify that your machine has enough internal space. The tube measures 1250mm in length with a 55mm outer diameter. All available space in your chassis should be slightly larger than these dimensions to ensure a proper fit. The listing warns that CO2 laser tubes are consumable items. Prolonged storage can lead to power attenuation. You should purchase this unit only when you are ready to install it immediately. This ensures optimal performance from the start. The tube uses a nano gold catalyst coating. This feature helps maintain a stable spot and high energy density. The beam output is in the TEM00 mode, which provides a concentrated beam spot. These specs suggest consistent engraving quality. The glass metal sealing technology is intended to extend the service life of the component. If you encounter issues within four months, the seller offers a replacement policy. You must provide the serial number and proof of the problem via photo or video. The listing excludes man-made damage from this coverage. This tube is compatible with metal in the context of the listed attributes, though CO2 tubes typically cut non-metals. Always confirm your machine's specific requirements before installation.
Before You Buy This Tube
You need to verify your machine’s internal dimensions carefully. The listing states the outer diameter is 55mm and the length is 1250mm. Ensure your cutter has enough space for these measurements. This tube is a replacement part, not a standalone machine. You must check if your existing power supply and cooling system support an 80W output. The listing notes it is a consumable item. Prolonged storage can cause power attenuation, so buy it only when ready to install. Compare this 1250mm option against other sizes like the 720mm or 1000mm variants. Choose the length that fits your specific frame. Proper installation requires secure connections for the pre-connected high voltage end. Regular maintenance of your cooling loop is essential for longevity. This component fits into the broader category of replacement parts for existing CO2 systems. It does not replace the entire engraver. You are upgrading a core component. Ensure your current setup can handle the heat and power demands of this specific glass tube model.
Check before you buy
- Confirm your machine fits the 1250mm length and 55mm diameter.
- Check if your power supply supports 80W maximum output.
- Verify your cooling system handles the heat from this tube.
- Ensure you have space for the pre-connected cables.
- Compare sizes to find the best fit for your frame.
The product at a glance
Cloudray 80W CO2 Laser Tube 1250mm
Best for: Direct 80W replacement in compatible machines
- Laser Type
- CO2
- Laser Power
- 80W (max 80W)
- Compatible Material
- Metal
- Length
- 49.2 inches
- Width
- 49.2 inches
View on Amazon: Cloudray 80W CO2 Laser Tube 1250mm Affiliate link
This Cloudray CR70 is a replacement CO2 laser tube with a maximum power of 80W. It measures 1250mm in length and 55mm in outer diameter. The unit features pre-connected high and low voltage cables to simplify installation. It uses nano gold catalyst coating for stable beam quality. You should verify your machine has enough space for this size before purchasing.
Pros
- Maximum laser power of 80W
- Pre-connected high and low voltage cables
- Nano gold catalyst coating for stable output
- 1250mm length and 55mm diameter
Cons
- Limited 4-month warranty coverage
- Power may attenuate if stored for long periods
- Only compatible with metal-compatible CO2 machines
Good fit if
- You need an 80W replacement tube
- Your machine accepts 1250mm tubes
- You want pre-connected cables for easier installation
Skip if
- You require a tube longer than 1250mm
- You need a warranty longer than 4 months
- You plan to store the tube for extended periods
Verdict: Cloudray CR70 80W CO2 Laser Tube suits users needing a direct 80W replacement with pre-connected cables. It fits machines with 1250mm space requirements.
Specifications side by side
| Spec | Cloudray 80W CO2 Laser Tube 1250mm |
|---|---|
| Laser Type | CO2 |
| Laser Power | 80W (max 80W) |
| Compatible Material | Metal |
| Length | 49.2 inches |
| Width | 49.2 inches |
| Size | 60-80W 1250mm |
| Color | Glass Tube |
| Model | CR70 |
Frequently asked questions
Is the Cloudray CR70 80W tube suitable for cutting metal?
The product attributes list metal as a compatible material. However, CO2 laser tubes typically excel at engraving and cutting non-metals like wood, acrylic, and leather. You should verify if your specific metal engraving needs align with the capabilities of a standard CO2 system before relying on this specification alone.
What is the physical length of this laser tube?
The listing specifies the size as 1250mm. This measurement refers to the total length of the glass tube. You must ensure your machine has at least 1250mm of internal space to accommodate this component. The width is also listed as 49.2 inches in the specs.
Does this tube come with pre-connected cables?
Yes, the Cloudray CR70 features pre-connected cables for both the high voltage end and the low voltage port. You also receive the necessary high voltage connector. This design simplifies installation by reducing the need to source separate wiring components, making it a direct replacement option for compatible machines.
What is the model number for this 80W tube?
The model number is CR70. This specific model is designed as a direct 80W replacement for compatible laser cutter and engraver machines. It is built for users who need a straightforward swap-in component that matches their existing machine requirements without extensive modification.
Is the tube made of glass or metal?
The specs identify this as a glass tube. CO2 laser tubes are traditionally constructed from glass to contain the gas mixture. You should handle this component with care to avoid physical damage. The glass construction is standard for this type of laser technology.
Can I use this tube in any CO2 laser machine?
No, it is not universal. It is designed for machines with 1250mm space requirements and specific connector types. You must verify that your machine accepts this exact length and has the necessary mounting space. It is a replacement part, not a standalone machine.