ATOMSTACK 48W Laser Engraver vs ATOMSTACK Atelier Enclosure: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the atomstack 48w laser engraver vs atelier enclosure. Both units are laser engravers from ATOMSTACK, but they serve different purposes. The A40 Pro V2 is a large, high-power machine designed for cutting thick materials. The Atelier is a compact, enclosed galvo system built for speed and portability. One focuses on raw power and depth, while the other prioritizes ease of use and quick turnaround for small items.
Key differences
| Aspect | ATOMSTACK 48W Dual-Mode Laser Engraver | AtomStack Atelier 12W Enclosed Galvo Laser |
|---|---|---|
| Laser Power | 48W (switches between 24W and 48W) | 12W (12,000mW) |
| Laser Type | Not listed | Diode Galvo |
| Form Factor | Open frame | Enclosed |
| Engraving Speed | Up to 500mm/s | Up to 4,000 mm/s |
| Cutting Capacity | 18 mm Wood, 7mm Acrylic | Not listed |
| Features | Air Assist | Enclosure, Camera |
Which one should you choose?
Choose ATOMSTACK 48W Dual-Mode Laser Engraver if
- You need to cut thick wood or acrylic in a single pass
- You require higher power output for deep engraving
- You prefer a larger working area for bigger projects
Choose AtomStack Atelier 12W Enclosed Galvo Laser if
- You want a portable unit for events or markets
- You need safety without wearing goggles due to the enclosure
- You prioritize fast engraving speeds for small items
Verdict: Choose the A40 Pro V2 if you need raw power for cutting thicker materials. Pick the Atelier if you value speed, portability, and a safer, enclosed workspace for small-scale work.
ATOMSTACK 48W vs Atelier Spec Breakdown
Laser Power
The ATOMSTACK 48W Dual-Mode Laser Engraver delivers a maximum output of 48,000 mW. It features a physical switch to toggle between 24W and 48W modes, allowing you to choose between fine engraving and powerful cutting. In contrast, the AtomStack Atelier 12W Enclosed Galvo Laser provides 12,000 mW of power. While the Atelier is sufficient for detailed work on thin materials, the 48W model offers significantly higher energy for deeper cuts and faster processing of thicker substrates. The 48W unit is clearly superior for heavy-duty tasks.
Engraving Speed
Speed requirements vary based on your project type. The ATOMSTACK 48W Dual-Mode Laser Engraver reaches engraving speeds up to 500 mm/s. This is adequate for standard vector work and moderate production runs. The AtomStack Atelier 12W Enclosed Galvo Laser operates at up to 4,000 mm/s, which is 157.5 inches per second. This galvo system is designed for ultrafast marking and high-volume small-item production, such as keychains or jewelry tags. For rapid throughput on small objects, the Atelier is the faster choice.
Cutting Capacity
If you need to cut through substantial thickness, the ATOMSTACK 48W Dual-Mode Laser Engraver is the capable tool. It can cut up to 18 mm wood, 9 mm MDF, and 7 mm acrylic in a single pass. It also handles 0.1 mm stainless steel sheets. The AtomStack Atelier 12W Enclosed Galvo Laser is not designed for thick material cutting. Its specifications focus on engraving and marking thin materials like wood, leather, and coated metal. The 48W model has a clear advantage for structural fabrication and thick material removal.
Form Factor
The physical footprint and design dictate where you can place the machine. The ATOMSTACK 48W Dual-Mode Laser Engraver is a large, stationary unit measuring 21.7 inches wide, 22.8 inches long, and 5.91 inches high. It requires a dedicated workspace. The AtomStack Atelier 12W Enclosed Galvo Laser is compact and portable. It measures 8 inches by 8 inches with a height of 14 inches and weighs only 7.7 lbs. It is fully pre-assembled and comes in a fully enclosed box, making it ideal for travel or small desks.
Safety Features
Safety protocols differ significantly between these two models. The ATOMSTACK 48W Dual-Mode Laser Engraver is a Class IV laser. It requires protective glass and safety glasses for operation. You must stay away from flammable materials and cannot leave the machine unattended during use. The AtomStack Atelier 12W Enclosed Galvo Laser is a Class 1 system. The full enclosure contains the laser beam, meaning no safety goggles are required. For users who prioritize ease of use and reduced safety overhead, the Atelier is the better option.
Software Compatibility
Both machines support standard design workflows. The AtomStack Atelier 12W Enclosed Galvo Laser works with the free AtomStack Studio and is compatible with LightBurn software. It supports file formats like DXF, JPG, PNG, BMP, SVG, and GIF, and connects via Wi-Fi or USB. The ATOMSTACK 48W Dual-Mode Laser Engraver data does not explicitly list software compatibility or connection methods. While it likely supports standard drivers, the Atelier provides verified cross-platform support for iOS, Android, Windows, and macOS out of the box.
Which ATOMSTACK model fits your workflow?
You need to cut thick wood or acrylic fast
The A40 Pro V2 offers 48W power to cut up to 18 mm wood or 7 mm acrylic in a single pass. Its 500 mm/s speed and physical power switch let you toggle between engraving and cutting modes. The large A40 work area and sturdy aluminum frame support heavy-duty projects that smaller units cannot handle.
You want portability and safety for events
The Atelier weighs only 7.7 lbs and arrives pre-assembled, making it easy to transport to markets or weddings. Its Class 1 safety rating means no goggles are needed. The enclosed design protects you while you create, and the lightweight build ensures you can set up and start engraving quickly anywhere.
You need high speed and AI alignment
This model engraves at up to 4,000 mm/s, delivering results faster than most standard diode lasers. The integrated HD camera and AI positioning automatically detect and align designs on materials like leather or coated metal. You can run multiple items in one session without manual adjustments, saving significant time on repetitive tasks.
You prefer a large work area for bulk orders
The A40 Pro V2 features a 21.7-inch width and 22.8-inch length, providing ample space for large projects. Its 48W output handles thick materials that smaller engravers cannot. The quick-install structure and air assist feature help maintain precision and efficiency when processing bulk orders or larger batches of wood and acrylic.
The products compared
ATOMSTACK 48W Dual-Mode Laser Engraver
Best for: Thick material cutting and high speed engraving
- Laser Power
- 24W / 48W (48,000 mW)
- Engraving Speed
- Up to 500 mm/s
- Cutting Capacity
- 18 mm wood, 7 nm acrylic
- Compatible Material
- Wood, Metal, Acrylic, Leather, Jewelry
- Features
- Air Assist
- Dimensions
- 22.8 × 21.7 × 5.91 inches
View on Amazon: ATOMSTACK 48W Dual-Mode Laser Engraver Affiliate link
The AtomStack A40 Pro V2 is a diode laser engraver with a 48W output that switches between 24W and 48W modes. It reaches speeds up to 500mm/s and cuts 18mm wood or 7mm acrylic in a single pass. The machine features auto air assist and a full aluminum alloy frame. It suits users who need high power for thick materials and fast processing times for small business projects.
Pros
- 48W output power switches between 24W and 48W modes
- Engraving speed reaches up to 500mm/s
- Cuts 18mm wood and 7mm acrylic in one pass
- Includes auto air assist for cleaner cuts
- Full aluminum alloy anodized structure for stability
Cons
- Class IV laser requires protective glasses and safety precautions
- No app control or remote operation listed in specifications
- Assembly required with 20-30 minute installation time
Good fit if
- You need to cut thick wood or acrylic quickly
- You want a durable aluminum frame for precision
- You require adjustable power for different material types
Skip if
- You need a fully enclosed safe operation system
- You want a machine that requires no assembly
- You prefer a smaller footprint for tight spaces
Verdict: AtomStack A40 Pro V2 48W Laser Engraver delivers high speed and thick material cutting for users who prioritize power and durability over enclosed safety features.
AtomStack Atelier 12W Enclosed Galvo Laser
Best for: portable small-item engraving
- Laser Type
- Diode Galvo
- Laser Power
- 12 W (12,000mW)
- Engraving Speed
- Up to 4,000 mm/s (157.5 in/s)
- Software Compatibility
- AtomStack Studio, LightBurn
- Form Factor
- Enclosed
- Compatible Material
- Wood, Leather
View on Amazon: AtomStack Atelier 12W Enclosed Galvo Laser Affiliate link
The AtomStack Atelier is a 12-watt diode galvo engraver in a Class 1 enclosed box. It weighs 7.7 lbs and measures 8 by 8 by 14 inches. The unit engraves at speeds up to 4,000 mm/s. An integrated HD camera with AI positioning helps align designs on materials like wood and leather. It runs on AtomStack Studio or LightBurn. This compact machine suits users who need portability and safety without goggles.
Pros
- 12-watt diode galvo laser source
- Enclosed Class 1 safety design
- Engraving speed up to 4,000 mm/s
- Integrated HD camera with AI alignment
- Lightweight 7.7 lbs portable build
Cons
- Lower 12-watt power compared to 48-watt alternatives
- Smaller working area limits large projects
- Galvo system restricts material thickness
Good fit if
- You need a portable unit for events
- You want Class 1 safety without goggles
- You engrave small items like keychains
Skip if
- You require high power for thick wood
- You need to cut large sheets of acrylic
- You prefer a large open-frame work area
Verdict: AtomStack Atelier 12W Enclosed Galvo offers a safe, fast, and portable solution for small-scale engraving tasks. It is the right pick for users who prioritize mobility and ease of use over raw cutting power.
Specifications side by side
| Spec | ATOMSTACK 48W Dual-Mode Laser Engraver | AtomStack Atelier 12W Enclosed Galvo Laser |
|---|---|---|
| Laser Type | not stated | Diode Galvo |
| Laser Power | 24W / 48W (48,000 mW) | 12 W (12,000mW) |
| Engraving Speed | Up to 500 mm/s | Up to 4,000 mm/s (157.5 in/s) |
| Software Compatibility | not stated | AtomStack Studio, LightBurn |
| Form Factor | not stated | Enclosed |
| Cutting Capacity | 18 mm wood, 7 nm acrylic | not stated |
| Compatible Material | Wood, Metal, Acrylic, Leather, Jewelry | Wood, Leather |
| Features | Air Assist | Enclosure, Camera |
| Dimensions | 22.8 × 21.7 × 5.91 inches | 8 × 8 × 14 inches |
| Size | A40 PRO V2 | not stated |
| Color | Black | Black and Orange |
| Model | A40 PRO V2 | AAS11A0085-BO |
Frequently asked questions
Can the ATOMSTACK 48W engrave metal?
Yes, it can engrave metal surfaces. The compatible materials list includes wood, metal, acrylic, leather, and jewelry. This makes it suitable for marking stainless steel or other hard materials, provided you use the appropriate settings for your specific metal type.
Is the Atelier laser safe for indoor use?
Yes, the Atelier 12W is designed for safer indoor operation. It features an enclosed design that contains laser light and smoke. This enclosure makes it a better choice for home offices or small workspaces where ventilation and safety are priorities.
Which machine is better for jewelry engraving?
The Atelier 12W is ideal for jewelry. It is a galvo system built for small-item engraving. Its compact size and camera assist make it precise for delicate tasks. The A40 Pro V2 is too large and powerful for fine jewelry work.
Does the A40 Pro V2 have air assist?
Yes, the A40 Pro V2 includes air assist. This feature helps clear debris and smoke from the engraving area. It improves cut quality and protects the lens. The Atelier does not list air assist as a feature in its specifications.
How much workspace does the A40 Pro V2 need?
You need a surface at least 21.7 inches wide and 22.8 inches long. The unit height is 5.91 inches. This large footprint is necessary for its A40 size class. It is not portable and requires a dedicated station for operation.
Can the Atelier laser cut thick materials?
No, it is not designed for thick material cutting. The Atelier 12W is a galvo system for engraving wood and leather. It lacks the power and focal length needed for deep cutting. The A40 Pro V2 is the correct choice for cutting.
What colors are available for these models?
The A40 Pro V2 is black. The Atelier 12W comes in black and orange. These color options are the only ones specified in the product data. The choice depends on your aesthetic preference rather than functional differences.